Fence Installation Cost in Greensboro, NC: 2026 Local Guide

Typical Greensboro job · 150 linear ft
$2,850-$4,8704% below U.S.

In Greensboro, 150 linear ft of new fence usually costs $2,850-$4,870, about 4% less than the same job nationally.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$660-$1,310
Most common
Wood privacy, 6 ft pressure-treated
$2,850-$4,870
Premium
Composite privacy, 6 ft
$6,200-$9,730
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

The biggest driver is size: 25 linear ft costs $610-$1,020 in Greensboro, while 400 linear ft costs $7,330-$12,570, about 1121% more. Ask every contractor to quote the same measured size.

SizeCost
25 linear ft$610-$1,020
50 linear ft$1,060-$1,790
100 linear ft$1,950-$3,330
150 linear ftMost common$2,850-$4,870
200 linear ft$3,750-$6,410
300 linear ft$5,540-$9,490
400 linear ft$7,330-$12,570

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Greensboro. Farm wire or electric runs $660-$1,310, about 74% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,200-$9,730.

TypeTypical jobInstalled
Farm wire or electric$660-$1,310$3.29-$7.12 installed
Split rail (2-3 rail)$1,360-$2,040$7.99-$11.96 installed
Chain link, 4 ft galvanized$2,190-$3,280$13.51-$20.22 installed
Wood picket, 4 ft$2,830-$4,070$17.78-$25.47 installed
Wood privacy, 6 ft pressure-treatedMost common$2,850-$4,870$17.92-$30.81 installed
Cedar privacy, 6 ft$3,530-$5,460$22.46-$34.78 installed
Vinyl privacy, 6 ft$3,710-$6,040$23.64-$38.64 installed
Steel ornamental, 4-5 ft$4,050-$6,250$25.95-$40.01 installed
Aluminum ornamental, 4-5 ft$4,410-$6,440$28.33-$41.30 installed
Composite privacy, 6 ft$6,200-$9,730$40.26-$63.21 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Greensboro fence cost?

We have already loaded Greensboro prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every fence installation job needs these, but ask about each one before you sign. In Greensboro, the biggest line is "Drive gate (double)" at $1,190-$2,910 each.

  • Walk gate$286-$578 / each
  • Drive gate (double)$1,190-$2,910 / each
  • Remove old fence$3.19-$4.15 / linear ft
  • Sloped or rocky ground (extra per ft)$2.24-$3.89 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Greensboro different for this job

Greensboro homes and the local housing stock

Greensboro lots and fences

In Greensboro, a city of mostly houses (60% of units), a fence is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

The midpoint price of a new fence works out to about 1.6% of what the median Greensboro home is worth ($244,800), the 47th highest of the 147 markets NumeralQ covers. Only 46 come out higher.

Local planning note for Greensboro

Greensboro, Durham and Cary side by side

Set against what homes are worth, fencing a yard costs Greensboro owners more than their neighbors: 1.6% of the median home value, compared with 0.7% in Cary.

If you're comparing new fence bids from Durham or Cary with bids from Greensboro, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Greensboro$3,8601.6%-18% (state figure)
Durham$3,8601.0%-18% (state figure)
Cary$3,8900.7%-15%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Exterior work in Greensboro historic districts

Within a Greensboro local historic district overlay, a Certificate of Appropriateness is needed to build, alter, move or demolish exterior parts of buildings and site features such as walls, fences, steps and paving, whether or not a building permit is needed. Reviewed features include window and door type and may include color; ordinary maintenance without a change in design, material or appearance is exempt, and staff may approve listed minor work.

Applies only inside a Greensboro local historic district; new off-street parking generally must be behind the main building.

Greensboro Land Development Ordinance 30-4-12 (certificate of appropriateness) · Checked October 10, 2026

Greensboro's climate and fence work

NOAA's climate normals count about 68 freezing nights a year in Greensboro, against 71 at the median North Carolina station and 124 at the median U.S. station.

In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Greensboro at a glance
Nights at or below 32°F68
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (North Carolina)General contractor license for projects of $40,000 or more
Where to check a licenseNC Licensing Board for General Contractors

Local data checked October 2026 · Sources at the bottom of the page

Fence height limits in Greensboro

In Greensboro, residential fences and walls may not exceed 4 feet within 15 feet of a street right-of-way, or 6 feet along a thoroughfare side or rear yard with no driveway access or sight-distance issue, and 7 feet elsewhere. Height is measured from grade on the side nearest the abutting property or street, and any retaining wall or berm below the fence counts toward the height.

Historic district guidelines may be stricter.

Greensboro Land Development Ordinance 30-9-4 (fences and walls) · Checked October 10, 2026

Nearby pricing

How Greensboro compares with nearby cities

Labor

Labor rates

On a fence installation job in Greensboro, fence erectors earn a median $18.80 an hour. After insurance, payroll taxes and overhead, contractors bill about $38-$49 per worker-hour.

Fence Erectors

$18.80/hrMedian pay
$38-$49/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Greensboro

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Greensboro, NC?

Fence installation cost in Greensboro, NC: $2,850-$4,870 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Greensboro-High Point area compare with the national median?

Median pay for construction laborers in the Greensboro-High Point, NC metro area is 15% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Guilford County?

NOAA logged 169 thunderstorm wind reports of 58 mph or more in Guilford County from 2016 to 2025.

How much snow does Greensboro get in a typical year?

About 7.1 inch a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Greensboro prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Greensboro (0.93×). How we estimate

$2,850-$4,870NumeralQ planning estimate
Get my estimate