Fence Installation Cost in Raleigh, NC: 2026 Local Guide

Typical Raleigh job · 150 linear ft
$2,880-$4,9004% below U.S.

Most Raleigh homeowners pay $2,880-$4,900 for 150 linear ft of new fence, about 4% less than the same job nationally.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$680-$1,340
Most common
Wood privacy, 6 ft pressure-treated
$2,880-$4,900
Premium
Composite privacy, 6 ft
$6,230-$9,760
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Raleigh the range runs from $620-$1,030 for 25 linear ft to $7,390-$12,650 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$620-$1,030
50 linear ft$1,070-$1,800
100 linear ft$1,970-$3,350
150 linear ftMost common$2,880-$4,900
200 linear ft$3,780-$6,450
300 linear ft$5,580-$9,550
400 linear ft$7,390-$12,650

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Raleigh. Farm wire or electric runs $680-$1,340, about 74% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,230-$9,760.

TypeTypical jobInstalled
Farm wire or electric$680-$1,340$3.39-$7.25 installed
Split rail (2-3 rail)$1,380-$2,070$8.11-$12.11 installed
Chain link, 4 ft galvanized$2,230-$3,330$13.75-$20.53 installed
Wood privacy, 6 ft pressure-treatedMost common$2,880-$4,900$18.05-$30.98 installed
Wood picket, 4 ft$2,890-$4,140$18.12-$25.92 installed
Cedar privacy, 6 ft$3,560-$5,500$22.60-$34.97 installed
Vinyl privacy, 6 ft$3,730-$6,080$23.78-$38.83 installed
Steel ornamental, 4-5 ft$4,100-$6,300$26.20-$40.33 installed
Aluminum ornamental, 4-5 ft$4,430-$6,470$28.45-$41.45 installed
Composite privacy, 6 ft$6,230-$9,760$40.42-$63.41 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Raleigh fence cost?

We have already loaded Raleigh prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Raleigh is "Drive gate (double)" at $1,210-$2,940 each, so ask whether it is included.

  • Walk gate$293-$586 / each
  • Drive gate (double)$1,210-$2,940 / each
  • Remove old fence$3.31-$4.30 / linear ft
  • Sloped or rocky ground (extra per ft)$2.30-$3.97 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Raleigh different for this job

Raleigh homes and the local housing stock

A fence against the value of a Raleigh home

58% of Raleigh units are houses with their own lots, and 51% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

At the midpoint of the range, the new fence equals roughly 0.9% of Raleigh's $415,800 median home value. 47 markets come out lower, so the price is small next to what homes here are worth.

Local planning note for Raleigh

Raleigh next to Cary and Durham

Raleigh sits between its neighbors: a typical new fence is 0.9% of the median home value here, 1.0% in Durham and 0.7% in Cary.

If you're comparing new fence bids from Cary or Durham with bids from Raleigh, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Raleigh$3,8900.9%-15%
Cary$3,8900.7%-15%
Durham$3,8601.0%-18% (state figure)

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Exterior work in Raleigh historic districts

Within a Raleigh General Historic Overlay District or on a Historic Landmark, no exterior part of a building or structure, including fences, walls, steps and paving, may be built, altered, restored, moved or demolished without a Certificate of Appropriateness from the Raleigh Historic Development Commission. It must be issued before any building permit and is required even when no permit is needed; reviewed features include window and door type and, where design standards address it, color.

Ordinary maintenance or repair with no change in design, material or outer appearance is exempt; applies only in these districts and on landmarks.

Raleigh Unified Development Ordinance Sec. 5.4.1 (General Historic Overlay District) · Checked October 10, 2026

Fence posts and rules in Raleigh

Raleigh averages 65 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 71 at the median North Carolina station and 124 at the median U.S. station.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Raleigh at a glance
Nights at or below 32°F65
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (North Carolina)General contractor license for projects of $40,000 or more
Where to check a licenseNC Licensing Board for General Contractors

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Raleigh

Fence rules in Raleigh

RuleValue
Front yard6.5 ft in front/side-street setback, above 4 ft max 50% opaque; no chain link; under 42 in within 20 ft of a thoroughfare (or set back 15 ft and screened)
Back and side yard8 ft (side/rear setbacks)
Permit neededzoning permit to add, move, or replace 50%+ of a fence (or change material/height/location)
Setbackfront-yard fences reviewed against Street Design Manual
Surveyfence diagram and site plan

UDO Sec. 7.2.8

Permits in Raleigh

A new fence in Raleigh needs a zoning permit, and so does changing an existing fence's height or material. The city asks for a site diagram, a property survey and the fence details.

Fence height and chain-link rules in Raleigh

In Raleigh, chain-link fences are not allowed in front or side street setbacks outside heavy industrial districts, and fences in those setbacks may be up to 6.5 feet if the part above 4 feet is no more than 50 percent opaque. Side and rear setback fences may be up to 8 feet, and within 20 feet of a Thoroughfare right-of-way a fence must be under 42 inches or set back 15 feet with evergreen screening.

Neighborhood conservation overlays or historic districts may add standards, and fences may not sit in tree conservation areas or city easements without written approval.

Raleigh Unified Development Ordinance Sec. 7.2.8 (walls and fences) · Checked October 10, 2026

Nearby pricing

How Raleigh compares with nearby cities

Labor

Labor rates

For fence installation in Raleigh, contractors bill about $39-$51 per worker-hour for fence erectors, whose median pay is $19.51 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$19.51/hrMedian pay
$39-$51/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Raleigh

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Raleigh, NC?

Fence installation cost in Raleigh, NC: $2,880-$4,900 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Raleigh-Cary area compare with the national median?

Median pay for construction laborers in the Raleigh-Cary, NC metro area is 15% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Wake County?

NOAA logged 322 thunderstorm wind reports of 58 mph or more in Wake County from 2016 to 2025.

How much snow does Raleigh get in a typical year?

About 5.2 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Raleigh prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • Raleigh - Fences permits, checked 2026-10-26 (https://raleighnc.gov/permits/services/fences)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Raleigh (0.95×). How we estimate

$2,880-$4,900NumeralQ planning estimate
Get my estimate