Fence Installation Cost in Durham, NC: 2026 Local Guide

Typical Durham job · 150 linear ft
$2,850-$4,8704% below U.S.

Most Durham homeowners pay $2,850-$4,870 for 150 linear ft of new fence, 4% below the national typical job.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$660-$1,310
Most common
Wood privacy, 6 ft pressure-treated
$2,850-$4,870
Premium
Composite privacy, 6 ft
$6,200-$9,730
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

The biggest driver is size: 25 linear ft costs $610-$1,020 in Durham, while 400 linear ft costs $7,330-$12,570, about 1121% more. Ask every contractor to quote the same measured size.

SizeCost
25 linear ft$610-$1,020
50 linear ft$1,060-$1,790
100 linear ft$1,950-$3,330
150 linear ftMost common$2,850-$4,870
200 linear ft$3,750-$6,410
300 linear ft$5,540-$9,490
400 linear ft$7,330-$12,570

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Durham. Farm wire or electric runs $660-$1,310, about 74% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,200-$9,730.

TypeTypical jobInstalled
Farm wire or electric$660-$1,310$3.29-$7.12 installed
Split rail (2-3 rail)$1,360-$2,040$7.99-$11.96 installed
Chain link, 4 ft galvanized$2,190-$3,280$13.51-$20.22 installed
Wood picket, 4 ft$2,830-$4,070$17.78-$25.47 installed
Wood privacy, 6 ft pressure-treatedMost common$2,850-$4,870$17.92-$30.81 installed
Cedar privacy, 6 ft$3,530-$5,460$22.46-$34.78 installed
Vinyl privacy, 6 ft$3,710-$6,040$23.64-$38.64 installed
Steel ornamental, 4-5 ft$4,050-$6,250$25.95-$40.01 installed
Aluminum ornamental, 4-5 ft$4,410-$6,440$28.33-$41.30 installed
Composite privacy, 6 ft$6,200-$9,730$40.26-$63.21 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Durham fence cost?

We have already loaded Durham prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every fence installation job needs these, but ask about each one before you sign. In Durham, the biggest line is "Drive gate (double)" at $1,190-$2,910 each.

  • Walk gate$286-$578 / each
  • Drive gate (double)$1,190-$2,910 / each
  • Remove old fence$3.19-$4.15 / linear ft
  • Sloped or rocky ground (extra per ft)$2.24-$3.89 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Durham different for this job

Durham homes and the local housing stock

Who builds fences in Durham

61% of Durham units are houses with their own lots, and 52% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

The midpoint of the range above is about 1.0% of Durham's $392,800 median home value, the 57th lowest share for a new fence among 147 markets and near the middle of the pack.

Local planning note for Durham

How Durham compares with nearby cities

Set against what homes are worth, fencing a yard costs Durham owners more than their neighbors: 1.0% of the median home value, compared with 0.7% in Cary.

Getting new fence bids from outside Durham? The Cary and Raleigh pages below show the full price ranges there.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Durham$3,8601.0%-18% (state figure)
Cary$3,8900.7%-15%
Raleigh$3,8900.9%-15%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Permits in Durham

Durham City-County Building & Safety doesn't require a permit for most fences inside city or county limits. The exceptions are lots in a designated floodplain and fences that serve as a pool barrier. Zoning generally allows up to 8 feet along the sides and back and 4 feet in front, with different rules on corner lots.

Durham Fence Installation Pricing — 2026 Local Market

Fence installation cost in Durham, NC: $2,850-$4,870 (typical job: 150 linear ft).

Fence posts and rules in Durham

NOAA's climate normals count about 65 freezing nights a year in Durham, against 71 at the median North Carolina station and 124 at the median U.S. station.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Durham at a glance
Nights at or below 32°F65
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (North Carolina)General contractor license for projects of $40,000 or more
Where to check a licenseNC Licensing Board for General Contractors

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Durham

Fence rules in Durham

RuleValue
Front yard4 ft (corner lots up to 6 ft along the side street behind the front building line)
Back and side yard8 ft (side and rear)
Permit neededNo permit for fences or walls (retaining walls excepted) unless in a floodplain or used as a pool barrier; front fences over 4 ft need a minor special use permit

UDO 9.9.1.

Stream buffers near decks, fences and landscaping in Durham

For Durham lots near streams, the joint city-county development ordinance applies riparian buffers even where state rules are less strict: 50 feet on perennial and intermittent streams in the Urban, Downtown and Compact tiers, and 100 to 150 feet on perennial streams in some watershed overlays in the Suburban and Rural tiers. Features that need grading must sit at least 10 feet outside the buffer, and fences on single-family lots are allowed in the buffer only if no trees are removed.

Buffer widths depend on the parcel's tier and overlay; confirm the width for your lot.

Durham Unified Development Ordinance Sec. 8.5 (riparian buffer protection) · Checked October 10, 2026

Fence height limits in Durham

Outside Durham's Rural Tier, fences and walls allowed by right are limited to 4 feet along a street frontage (between the house and the street, within 50 feet of it), 6 feet along a corner lot's side street from the front building line back, and 8 feet where there is no street frontage. The finished side must face outward, and razor and barbed wire are barred in residential districts outside the Rural Tier.

Taller fences may be possible through a minor special use permit, which was not fully captured.

Durham Unified Development Ordinance Sec. 9.9 (fences and walls) · Checked October 10, 2026

Exterior work and equipment in Durham historic districts

Within a Durham local historic district or on a historic landmark, a Certificate of Appropriateness is needed before any exterior feature or site work is built, altered, restored, moved or demolished, expressly including fences, walls, steps, paving and above-ground mechanical and utility equipment, and no building permit issues without it. Ordinary maintenance or repair without substantial change is exempt, and Planning staff can approve minor works.

Applies only in local historic districts and on landmarks; the review criteria document was not captured.

Durham Unified Development Ordinance Sec. 3.17 (certificate of appropriateness) · Checked October 10, 2026

Nearby pricing

How Durham compares with nearby cities

Labor

Labor rates

For fence installation in Durham, contractors bill about $38-$49 per worker-hour for fence erectors, whose median pay is $18.80 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$18.80/hrMedian pay
$38-$49/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Durham

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Durham, NC?

Fence installation cost in Durham, NC: $2,850-$4,870 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Durham-Chapel Hill area compare with the national median?

Median pay for construction laborers in the Durham-Chapel Hill, NC metro area is 1% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Durham County?

NOAA logged 102 thunderstorm wind reports of 58 mph or more in Durham County from 2016 to 2025.

How much snow does Durham get in a typical year?

About 5.2 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Durham prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • City of Durham, Fences and Walls, checked 2026-10-26 (https://www.durhamnc.gov/303/Fences-Walls)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

This estimate is NumeralQ's national baseline with a Durham adjustment of 0.95×. How we estimate

$2,850-$4,870NumeralQ planning estimate
Get my estimate