Deck & Patio Cost in Raleigh, NC: 2026 Local Guide

Typical Raleigh job · 320 sq ft
$4,880-$6,8308% below U.S.

Most Raleigh homeowners pay $4,880-$6,830 for a 320 sq ft deck or patio, about 8% less than the same job nationally.

The median home in Raleigh was built in 1997, and newer lots usually make for a cleaner build site.

For comparable written proposals, confirm dimensions and elevation, footing and attachment details, decking and guard scope, and grading or drainage work.

Your options

Budget
Patio: plain concrete
$2,230-$2,970
Most common
Deck: pressure-treated wood
$4,880-$6,830
Premium
Deck: ipe hardwood
$11,390-$16,530
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

The biggest driver is size: 10 x 10 ft costs $1,530-$2,140 in Raleigh, while 20 x 30 ft costs $9,160-$12,810, about 499% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 10 ft$1,530-$2,140
12 x 12 ft$2,200-$3,080
12 x 16 ft$2,930-$4,100
16 x 16 ft$3,910-$5,470
16 x 20 ftMost common$4,880-$6,830
20 x 20 ft$6,100-$8,540
20 x 30 ft$9,160-$12,810

Installed: Deck: pressure-treated wood

Cost by material

Deck or patio cost by material or type

In Raleigh, patio: plain concrete comes in about 56% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.4 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $4,880-$6,830).

TypeTypical jobInstalled
Patio: plain concrete$2,230-$2,970$6.98-$9.29 installed
Patio: gravel$2,620-$3,690$8.19-$11.54 installed
Patio: stamped concrete$3,900-$5,230$12.20-$16.34 installed
Patio: brick pavers$3,910-$5,430$12.22-$16.96 installed
Patio: concrete pavers$4,200-$5,850$13.14-$18.28 installed
Patio: flagstone$4,620-$11,870$14.44-$37.08 installed
Deck: pressure-treated woodMost common$4,880-$6,830$15.26-$21.35 installed
Patio: slate$5,150-$8,390$16.09-$26.23 installed
Show 9 more options
TypeTypical jobInstalled
Patio: porcelain pavers$5,180-$8,150$16.19-$25.48 installed
Patio: travertine pavers$5,690-$7,650$17.79-$23.89 installed
Deck: cedar$5,890-$8,710$18.40-$27.21 installed
Patio: bluestone$5,920-$9,680$18.51-$30.26 installed
Deck: redwood$8,050-$11,160$25.17-$34.87 installed
Deck: composite$8,790-$12,990$27.47-$40.59 installed
Deck: PVC$9,520-$12,650$29.74-$39.54 installed
Deck: aluminum$9,530-$12,620$29.77-$39.44 installed
Deck: ipe hardwood$11,390-$16,530$35.58-$51.67 installed

Materials include waste and contractor markup. Typical job: 320 sq ft

What will your Raleigh deck or patio cost?

We have already loaded Raleigh prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 8 items your quote includes. The costliest line in Raleigh is "Pergola or cover structure" at $4,000-$7,560 for the job.

  • Railing: wood$30.68-$42.31 / linear ft
  • Railing: aluminum or steel$46.77-$81.94 / linear ft
  • Railing: composite$88-$157 / linear ft
  • Railing: cable$107-$180 / linear ft
  • Railing: glass$127-$221 / linear ft
  • Stairs (per step, wood, pre-cut stringers)$97-$173 / step
  • Footing (poured concrete)$183-$335 / each
  • Pergola or cover structure$4,000-$7,560 / job
Show material-only prices
Add-onMaterials
Railing: wood$12.07-$18.11 / linear ft
Railing: aluminum or steel$30.19-$60.38 / linear ft
Railing: composite$60-$121 / linear ft
Railing: cable$85-$151 / linear ft
Railing: glass$97-$181 / linear ft
Stairs (per step, wood, pre-cut stringers)$33.81-$90.56 / step
Footing (poured concrete)$57-$173 / each
Pergola or cover structure$1,720-$4,600 / job

Installed price per unit

Local conditions

What makes Raleigh different for this job

Raleigh homes and the local housing stock

Raleigh yards and who owns them

In Raleigh, a city of mostly houses (58% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

High home values make the deck or patio a small slice in Raleigh: about 1.4% of the $415,800 median home, the 44th lowest among the 147 markets we price.

Local planning note for Raleigh

How Raleigh compares with nearby cities

Relative to home values, Raleigh falls in the middle, with a deck or patio at 1.4% of the median home, below Durham and above Cary.

If you're comparing deck or patio bids from Cary or Durham with bids from Raleigh, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for carpenters vs U.S.
Raleigh$5,8551.4%-16%
Cary$5,8551.0%-16%
Durham$5,9001.5%-15%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Impervious surface caps in Raleigh

In Raleigh, single- and two-unit lots that are exempt from active stormwater controls lose that exemption when impervious surface exceeds the zoning cap: 20 percent in R-1, 25 percent in R-2, 38 percent in R-4, 51 percent in R-6, and 65 percent in R-10 and other districts. Lots with an existing detached house get a one-time 400 square foot increase without added controls; above the cap, the owner must show no increase in runoff.

Pervious-surface substitutes may be allowed, and the effect depends on your lot's existing coverage.

Raleigh Unified Development Ordinance Sec. 9.2.2 (active stormwater control measures) · Checked October 10, 2026

Exterior work in Raleigh historic districts

Within a Raleigh General Historic Overlay District or on a Historic Landmark, no exterior part of a building or structure, including fences, walls, steps and paving, may be built, altered, restored, moved or demolished without a Certificate of Appropriateness from the Raleigh Historic Development Commission. It must be issued before any building permit and is required even when no permit is needed; reviewed features include window and door type and, where design standards address it, color.

Ordinary maintenance or repair with no change in design, material or outer appearance is exempt; applies only in these districts and on landmarks.

Raleigh Unified Development Ordinance Sec. 5.4.1 (General Historic Overlay District) · Checked October 10, 2026

Deck footings and permits in Raleigh

Raleigh averages 65 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 71 at the median North Carolina station and 124 at the median U.S. station.

Ask the building department for Raleigh's frost depth. The model code requires deck footings to sit below it, and at least 12 inches down.

The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.

Yearly precipitation runs about 46.1 inch here, against 37.5 at the median U.S. station.

Decks in Raleigh at a glance
Nights at or below 32°F65
Yearly precipitation46.1 in
Climate zone (county)3A
Contractor license (North Carolina)General contractor license for projects of $40,000 or more
Where to check a licenseNC Licensing Board for General Contractors

Local data checked October 2026 · Sources at the bottom of the page

Permits in Raleigh

Raleigh requires a building permit for a new deck, screened porch, balcony or sunroom.

Nearby pricing

How Raleigh compares with nearby cities

Labor

Labor rates

On a deck or patio job in Raleigh, carpenters earn a median $24.43 an hour. After insurance, payroll taxes and overhead, contractors bill about $49-$64 per worker-hour.

Carpenters

$24.43/hrMedian pay
$49-$64/hrBilled rate

Cement Masons and Concrete Finishers

$22.80/hrMedian pay
$46-$59/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Raleigh

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration
Common questions

Frequently Asked Questions

How much does Deck & Patio cost in Raleigh, NC?

Deck or patio cost in Raleigh, NC: $4,880-$6,830 (typical job: 320 sq ft). The table near the top of the page prices each option separately.

How does pay for carpenters in the Raleigh-Cary area compare with the national median?

Median pay for carpenters in the Raleigh-Cary, NC metro area is 16% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Wake County?

NOAA logged 322 thunderstorm wind reports of 58 mph or more in Wake County from 2016 to 2025.

How much snow does Raleigh get in a typical year?

About 5.2 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Raleigh prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Raleigh (0.95×). How we estimate

$4,880-$6,830NumeralQ planning estimate
Get my estimate