Deck & Patio Cost in Greensboro, NC: 2026 Local Guide

Typical Greensboro job · 320 sq ft
$4,840-$6,7809% below U.S.

Most Greensboro homeowners pay $4,840-$6,780 for a 320 sq ft deck or patio, 9% under the U.S. figure.

For comparable written proposals, confirm dimensions and elevation, footing and attachment details, decking and guard scope, and grading or drainage work.

Your options

Budget
Patio: plain concrete
$2,190-$2,920
Most common
Deck: pressure-treated wood
$4,840-$6,780
Premium
Deck: ipe hardwood
$11,300-$16,420
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

Find your size in the table. In Greensboro the range runs from $1,510-$2,120 for 10 x 10 ft to $9,070-$12,710 for 20 x 30 ft; a quote that does not state the measured size is hard to compare.

SizeCost
10 x 10 ft$1,510-$2,120
12 x 12 ft$2,180-$3,050
12 x 16 ft$2,900-$4,070
16 x 16 ft$3,870-$5,420
16 x 20 ftMost common$4,840-$6,780
20 x 20 ft$6,050-$8,470
20 x 30 ft$9,070-$12,710

Installed: Deck: pressure-treated wood

Cost by material

Deck or patio cost by material or type

The gap between options is wide: deck: ipe hardwood costs about 2.4 times as much as deck: pressure-treated wood in Greensboro, and patio: plain concrete trims about 56%.

TypeTypical jobInstalled
Patio: plain concrete$2,190-$2,920$6.86-$9.14 installed
Patio: gravel$2,580-$3,640$8.07-$11.38 installed
Patio: stamped concrete$3,830-$5,130$11.97-$16.03 installed
Patio: brick pavers$3,860-$5,360$12.06-$16.76 installed
Patio: concrete pavers$4,130-$5,760$12.92-$17.99 installed
Patio: flagstone$4,600-$11,840$14.36-$36.99 installed
Deck: pressure-treated woodMost common$4,840-$6,780$15.12-$21.18 installed
Patio: slate$5,070-$8,290$15.84-$25.90 installed
Show 9 more options
TypeTypical jobInstalled
Patio: porcelain pavers$5,090-$8,030$15.90-$25.10 installed
Patio: travertine pavers$5,620-$7,550$17.57-$23.60 installed
Patio: bluestone$5,830-$9,570$18.23-$29.89 installed
Deck: cedar$5,840-$8,650$18.25-$27.02 installed
Deck: redwood$7,990-$11,070$24.97-$34.61 installed
Deck: composite$8,710-$12,880$27.22-$40.26 installed
Deck: PVC$9,430-$12,540$29.46-$39.18 installed
Deck: aluminum$9,480-$12,570$29.64-$39.27 installed
Deck: ipe hardwood$11,300-$16,420$35.32-$51.33 installed

Materials include waste and contractor markup. Typical job: 320 sq ft

What will your Greensboro deck or patio cost?

We have already loaded Greensboro prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 8 extras are where quotes most often grow. The largest single line in Greensboro is "Pergola or cover structure" at $3,960-$7,510 for the job, so ask whether it is included.

  • Railing: wood$30.36-$41.88 / linear ft
  • Railing: aluminum or steel$46.48-$81.56 / linear ft
  • Railing: composite$88-$156 / linear ft
  • Railing: cable$106-$179 / linear ft
  • Railing: glass$127-$220 / linear ft
  • Stairs (per step, wood, pre-cut stringers)$96-$171 / step
  • Footing (poured concrete)$180-$332 / each
  • Pergola or cover structure$3,960-$7,510 / job
Show material-only prices
Add-onMaterials
Railing: wood$12.07-$18.11 / linear ft
Railing: aluminum or steel$30.19-$60.38 / linear ft
Railing: composite$60-$121 / linear ft
Railing: cable$85-$151 / linear ft
Railing: glass$97-$181 / linear ft
Stairs (per step, wood, pre-cut stringers)$33.81-$90.56 / step
Footing (poured concrete)$57-$173 / each
Pergola or cover structure$1,720-$4,600 / job

Installed price per unit

Local conditions

What makes Greensboro different for this job

Greensboro homes and the local housing stock

Greensboro homes and outdoor projects

In Greensboro, a city of mostly houses (60% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

The midpoint price of a deck or patio works out to about 2.4% of what the median Greensboro home is worth ($244,800), the 49th highest of the 147 markets NumeralQ covers. Only 48 come out higher.

Local planning note for Greensboro

Greensboro, Durham and Cary side by side

Of the three, Greensboro is where a deck or patio takes the biggest bite of a home's value: 2.4% of the median home, against 1.5% in Durham and 1.0% in Cary. That's mostly lower home values, not higher prices.

If you're comparing deck or patio bids from Durham or Cary with bids from Greensboro, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for carpenters vs U.S.
Greensboro$5,8102.4%-18%
Durham$5,9001.5%-15%
Cary$5,8551.0%-16%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Exterior work in Greensboro historic districts

Within a Greensboro local historic district overlay, a Certificate of Appropriateness is needed to build, alter, move or demolish exterior parts of buildings and site features such as walls, fences, steps and paving, whether or not a building permit is needed. Reviewed features include window and door type and may include color; ordinary maintenance without a change in design, material or appearance is exempt, and staff may approve listed minor work.

Applies only inside a Greensboro local historic district; new off-street parking generally must be behind the main building.

Greensboro Land Development Ordinance 30-4-12 (certificate of appropriateness) · Checked October 10, 2026

Deck footings and permits in Greensboro

NOAA's climate normals count about 68 freezing nights a year in Greensboro, against 71 at the median North Carolina station and 124 at the median U.S. station.

The residential code puts deck footings at least 12 inches into undisturbed soil and below the local frost line; the building department sets that depth for Greensboro.

The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.

The station also averages 44.0 inches of rain and melted snow a year (U.S. median: 37.5).

Decks in Greensboro at a glance
Nights at or below 32°F68
Yearly precipitation44.0 in
Climate zone (county)3A
Contractor license (North Carolina)General contractor license for projects of $40,000 or more
Where to check a licenseNC Licensing Board for General Contractors

Local data checked October 2026 · Sources at the bottom of the page

Permits in Greensboro

Greensboro's test is simple: if a project covers new ground, like a new deck or garage, it needs a building permit. Swapping out deck boards, railings or stair treads on an existing deck doesn't.

Watershed rules for paving and additions in Greensboro

For Greensboro lots in a designated water-supply watershed, the city's watershed rules apply to new grading, paving, gravel and structures. Exempt work includes like-for-like replacement of built-upon area outside stream buffers, additions of no more than 400 square feet of built-upon area outside a required stream buffer, and a single-family home and accessory structures on a lot of record created before July 1, 1993, outside the two watershed critical area tiers.

Check your parcel on the Greensboro Designated Watershed Map; built-upon limits from an approved watershed plan or plat still apply.

Greensboro Land Development Ordinance 30-12-3.4 and 30-12-4 (watershed regulations) · Checked October 10, 2026

Nearby pricing

How Greensboro compares with nearby cities

Labor

Labor rates

For deck or patio in Greensboro, contractors bill about $48-$62 per worker-hour for carpenters, whose median pay is $24.00 an hour. The difference covers insurance, taxes, overhead and profit.

Carpenters

$24.00/hrMedian pay
$48-$62/hrBilled rate

Cement Masons and Concrete Finishers

$22.13/hrMedian pay
$44-$58/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Greensboro

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration
Common questions

Frequently Asked Questions

How much does Deck & Patio cost in Greensboro, NC?

Deck or patio cost in Greensboro, NC: $4,840-$6,780 (typical job: 320 sq ft). The table above breaks it out by option.

How does pay for carpenters in the Greensboro-High Point area compare with the national median?

Median pay for carpenters in the Greensboro-High Point, NC metro area is 18% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Guilford County?

NOAA logged 169 thunderstorm wind reports of 58 mph or more in Guilford County from 2016 to 2025.

How much snow does Greensboro get in a typical year?

About 7.1 inch a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Greensboro prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Greensboro (0.93×). How we estimate

$4,840-$6,780NumeralQ planning estimate
Get my estimate