Deck or patio cost by size
Size moves the price more than anything else. In North Carolina, going from 10 x 10 ft to 20 x 30 ft takes the job from $1,500-$2,100 to $9,000-$12,610, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,500-$2,100 |
| 12 x 12 ft | $2,160-$3,030 |
| 12 x 16 ft | $2,880-$4,040 |
| 16 x 16 ft | $3,840-$5,380 |
| 16 x 20 ftMost common | $4,800-$6,730 |
| 20 x 20 ft | $6,000-$8,410 |
| 20 x 30 ft | $9,000-$12,610 |
Deck or patio cost by material or type
The gap between options is wide: deck: ipe hardwood costs about 2.4 times as much as deck: pressure-treated wood in North Carolina, and patio: plain concrete trims about 55%.
What will your North Carolina deck or patio cost?
We have already loaded North Carolina prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Cary | $4,880-$6,830 | Cary |
| Charlotte | $4,890-$6,840 | Charlotte |
| Durham | $4,920-$6,880 | Durham |
| Greensboro | $4,840-$6,780 | Greensboro |
| Raleigh | $4,880-$6,830 | Raleigh |
State conditions
Local planning note for North Carolina
How North Carolina's cities differ for this job
Labor is not what separates North Carolina's cities on decks and patios: pay for carpenters stays within 3 points everywhere we cover, from 18% below the U.S. median in Greensboro to 15% below the U.S. median in Durham. Frost matters for footings: Greensboro averages 68 freezing nights a year and Charlotte 58, per NOAA normals.
Measured against home values, the same job weighs most in Greensboro (2.4% of the median home) and least in Cary (1.0%).
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | Nights at or below 32°F a year | Typical job as share of median home value |
|---|---|---|---|---|
| Cary | -16% | Not published | 65 | 1.0% |
| Charlotte | -16% | Not published | 58 | 1.5% |
| Durham | -15% | Not published | 65 | 1.5% |
| Greensboro | -18% | Not published | 68 | 2.4% |
| Raleigh | -16% | Not published | 65 | 1.4% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for North Carolina
Does North Carolina charge sales tax on contractor labor?
North Carolina taxes repair, maintenance and installation services on the whole charge, while a capital improvement (a real property contract) isn't taxed to the homeowner (N.C.G.S. 105-164.4(a)(16); Directive SD-16-4). A full deck or patio is more likely to qualify as a capital improvement than a small fix, so ask how the contractor classifies the work before you sign.
Labor rates
For deck or patio in North Carolina, contractors bill about $47-$61 per worker-hour for carpenters, whose median pay is $23.61 an hour. The difference covers insurance, taxes, overhead and profit.
Before you sign in North Carolina
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Local planning note for North Carolina
North Carolina's contractor recovery fund
As a last resort, North Carolina has a state fund: its Homeowners Recovery Fund can repay single-family homeowners for losses from a dishonest or incompetent licensed general contractor once a court judgment goes unpaid; the board decides the amount (G.S. 87-15.5 to 87-15.8). Whatever the size of your deck or patio, pay by check or card rather than cash so each payment can be proved later.
Local planning note for North Carolina
How North Carolina lien law affects a deck or patio
Anyone who works on a deck or patio or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. North Carolina does not require a lien agent on work to an existing owner-occupied single-family home (G.S. 44A-11.1), and liens are due 120 days after last furnishing (44A-12).
Lower-tier subs lien the funds you still owe, so collect waivers as you pay. You can bond off a lien at 125% of the claim (44A-16), and advance waivers are unenforceable. On a deck or patio, the lumber yard or concrete supplier that sold to your contractor on credit is the party most likely to send a lien notice.
Frequently Asked Questions
What does a deck or patio cost in North Carolina?
They are planning estimates, not contractor bids.
Does pay for carpenters vary across North Carolina?
Not much. Across the 5 North Carolina cities we cover, pay for carpenters stays within a few points, from 18% below the national median in Greensboro to 15% below in Durham (BLS, May 2025).
Do deck builders need a license in North Carolina?
You can confirm a license is active through the NC Licensing Board for General Contractors.
Does North Carolina's climate affect deck materials?
All of North Carolina's counties are in DOE's moist or marine climate zones. Use ground-contact treated lumber for posts and leave gaps for drainage.
Can a new deck attach to an older North Carolina home?
Usually, but the inspector will check the rim joist the ledger bolts into. That matters here, where 34% of homes were built before 1980 (Census).
Does frost limit when a deck can be built in North Carolina?
Less than in colder states: 5% of North Carolina's counties are in climate zone 5 or colder (DOE). Severe-storm reports peak from May through July (NOAA).
Ready for your own number?
We have already loaded North Carolina prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, nights at or below 32°F (https://www.ncei.noaa.gov/products/land-based-station/us-climate-normals)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- North Carolina General Statutes Chapter 87 Article 1A, checked November 10, 2026 (https://ncleg.gov/EnactedLegislation/Statutes/HTML/ByArticle/Chapter_87/Article_1A.html)
- NCDOR Sales and Use Tax Directive SD-16-4 (listed on the NCDOR directives index), checked November 10, 2026 (https://www.ncdor.gov/taxes-forms/sales-and-use-tax/sales-and-use-tax-division-directives)
- Levelset, North Carolina lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/north-carolina-lien-law-faqs/)
Installed: Deck: pressure-treated wood