Siding replacement cost by size
Size moves the price more than anything else. In North Carolina, going from 1,000 sq ft of siding to 3,000 sq ft of siding takes the job from $5,040-$6,390 to $14,150-$17,630, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $5,040-$6,390 |
| 1,500 sq ft of sidingMost common | $7,320-$9,200 |
| 2,000 sq ft of siding | $9,600-$12,010 |
| 2,500 sq ft of siding | $11,870-$14,820 |
| 3,000 sq ft of siding | $14,150-$17,630 |
Siding replacement cost by material or type
In North Carolina, vinyl lap siding is already the lowest-cost choice, at $7,320-$9,200; stepping up to brick veneer costs about 2.7 times as much ($17,560-$27,050).
What will your North Carolina siding job cost?
We have already loaded North Carolina prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Cary | $7,460-$9,390 | Cary |
| Charlotte | $7,480-$9,400 | Charlotte |
| Durham | $7,530-$9,470 | Durham |
| Greensboro | $7,390-$9,290 | Greensboro |
| Raleigh | $7,460-$9,390 | Raleigh |
State conditions
Local planning note for North Carolina
How North Carolina's cities differ for this job
Labor is not what separates North Carolina's cities on siding jobs: pay for carpenters stays within 3 points everywhere we cover, from 18% below the U.S. median in Greensboro to 15% below the U.S. median in Durham. FEMA's strong-wind rating runs from Relatively Low in Wake County (Raleigh) to Relatively High in Mecklenburg County (Charlotte); in the higher-rated counties, ask for the product's wind rating.
Measured against home values, the same job weighs most in Greensboro (3.4% of the median home) and least in Cary (1.5%).
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | FEMA strong-wind risk (county) | Typical job as share of median home value |
|---|---|---|---|---|
| Cary | -16% | Not published | Relatively Low | 1.5% |
| Charlotte | -16% | Not published | Relatively High | 2.2% |
| Durham | -15% | Not published | Relatively High | 2.2% |
| Greensboro | -18% | Not published | Relatively Moderate | 3.4% |
| Raleigh | -16% | Not published | Relatively Low | 2.0% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for North Carolina
Does North Carolina charge sales tax on contractor labor?
North Carolina taxes repair, maintenance and installation services on the whole charge, while a capital improvement (a real property contract) isn't taxed to the homeowner (N.C.G.S. 105-164.4(a)(16); Directive SD-16-4). Whether a siding job counts as a capital improvement or a repair decides the tax, so ask the contractor how they plan to bill it.
Labor rates
For siding replacement in North Carolina, contractors bill about $47-$61 per worker-hour for carpenters, whose median pay is $23.61 an hour. The difference covers insurance, taxes, overhead and profit.
Before you sign in North Carolina
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Local planning note for North Carolina
If a North Carolina contractor won't pay up
If a contractor takes your money and can't pay a judgment, North Carolina's Homeowners Recovery Fund can repay single-family homeowners for losses from a dishonest or incompetent licensed general contractor once a court judgment goes unpaid; the board decides the amount (G.S. 87-15.5 to 87-15.8). For a siding job, keep the signed contract, every receipt and the contractor's license or registration number, since a fund claim or complaint depends on them.
Local planning note for North Carolina
Mechanic's liens and lien waivers in North Carolina
If a sub or supplier on your siding job isn't paid, the law may let them file a lien on the house even when you paid your contractor. North Carolina does not require a lien agent on work to an existing owner-occupied single-family home (G.S. 44A-11.1), and liens are due 120 days after last furnishing (44A-12).
Lower-tier subs lien the funds you still owe, so collect waivers as you pay. You can bond off a lien at 125% of the claim (44A-16), and advance waivers are unenforceable. Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.
Frequently Asked Questions
What does siding replacement cost in North Carolina?
They are planning estimates, not contractor bids.
Does pay for carpenters vary across North Carolina?
Not much. Across the 5 North Carolina cities we cover, pay for carpenters stays within a few points, from 18% below the national median in Greensboro to 15% below in Durham (BLS, May 2025).
Do siding contractors need a license in North Carolina?
Yes. Look the contractor up with the NC Licensing Board for General Contractors before you sign.
Does hail damage siding in North Carolina?
It can. NOAA logged 1,130 reports of one-inch-plus hail in North Carolina from 2016 to 2025. Ask how each siding option handles impact.
Is wind a concern for siding in North Carolina?
It is. NOAA logged 6,588 reports of 58-mph-plus wind in North Carolina from 2016 to 2025. Ask for the siding's wind rating and the fastening pattern it requires.
Does North Carolina's climate affect which siding to choose?
All of North Carolina's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.
Ready for your own number?
We have already loaded North Carolina prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- North Carolina General Statutes Chapter 87 Article 1A, checked November 10, 2026 (https://ncleg.gov/EnactedLegislation/Statutes/HTML/ByArticle/Chapter_87/Article_1A.html)
- NCDOR Sales and Use Tax Directive SD-16-4 (listed on the NCDOR directives index), checked November 10, 2026 (https://www.ncdor.gov/taxes-forms/sales-and-use-tax/sales-and-use-tax-division-directives)
- Levelset, North Carolina lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/north-carolina-lien-law-faqs/)
Installed: Vinyl lap siding