Concrete driveway cost by size
Find your size in the table. In Arlington the range runs from $1,690-$2,410 for 10 x 20 ft (1 car, short) to $6,700-$9,070 for 10 x 100 ft (long single); a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 10 x 20 ft (1 car, short) | $1,690-$2,410 |
| 12 x 24 ft (1 car) | $2,240-$3,140 |
| 20 x 20 ft (2 car, short) | $2,940-$4,070 |
| 24 x 24 ft (2 car)Most common | $4,040-$5,540 |
| 24 x 36 ft (3 car) | $5,850-$7,940 |
| 10 x 100 ft (long single) | $6,700-$9,070 |
Installed: Plain gray concrete, broom finish
Concrete driveway cost by material or type
Material choice is the second big lever in Arlington. Resurfacing overlay (on sound old slab) runs $2,530-$3,910, about 33% under plain gray concrete, broom finish, while stained or saw-cut patterns costs $8,100-$11,140.
| Type | Typical job | Installed |
|---|---|---|
| Gravel (for comparison) | $1,530-$2,540 | $1.90-$3.13 installed |
| Resurfacing overlay (on sound old slab) | $2,530-$3,910 | $3.64-$5.49 installed |
| Asphalt (for comparison) | $3,020-$4,480 | $4.48-$6.49 installed |
| Plain gray concrete, broom finishMost common | $4,040-$5,540 | $6.26-$8.32 installed |
| Swirl or trowel finish | $4,260-$5,820 | $6.63-$8.81 installed |
| Rock salt finish | $4,460-$6,130 | $6.99-$9.36 installed |
| Exposed aggregate | $4,920-$6,730 | $7.78-$10.40 installed |
| Colored concrete | $4,940-$6,810 | $7.81-$10.52 installed |
Show 5 more options
| Type | Typical job | Installed |
|---|---|---|
| Broom finish with stamped border | $5,120-$7,080 | $8.12-$11.00 installed |
| Pervious (porous) concrete | $5,820-$8,150 | $9.34-$12.86 installed |
| Stamped concrete | $7,080-$9,670 | $11.54-$15.50 installed |
| Stained or saw-cut patterns | $8,100-$11,140 | $13.31-$18.05 installed |
| Pavers (for comparison) | $8,130-$11,430 | $13.35-$18.55 installed |
Materials include waste and contractor markup. Typical job: 576 sq ft
What will your Arlington driveway cost?
We have already loaded Arlington prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every concrete driveway job needs these, but ask about each one before you sign. In Arlington, the biggest line is "Apron / curb cut" at $703-$1,150 for the job.
- Remove old driveway$2.23-$3.15 / sq ft
- Rebar grid (instead of mesh)$0.99-$2.23 / sq ft
- Fiber reinforcement$0.43-$0.64 / sq ft
- 6 in. slab instead of 4 in.$1.17-$1.56 / sq ft
- Apron / curb cut$703-$1,150 / job
- Heated driveway (hydronic or electric)$13.52-$22.40 / sq ft
- Sealer$0.34-$0.47 / sq ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old driveway | $0.34-$0.69 / sq ft |
| Rebar grid (instead of mesh) | $0.52-$1.61 / sq ft |
| Fiber reinforcement | $0.11-$0.23 / sq ft |
| 6 in. slab instead of 4 in. | $0.92-$1.24 / sq ft |
| Apron / curb cut | $173-$460 / job |
| Heated driveway (hydronic or electric) | $6.90-$13.80 / sq ft |
| Sealer | $0.11-$0.18 / sq ft |
Installed price per unit
What makes Arlington different for this job
Arlington homes and the local housing stock
Arlington homes and their driveways
In Arlington, a city of mostly houses (66% of units), a driveway is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.
Against the $304,700 median home value, a typical new concrete driveway in Arlington costs about 1.6% of the house. That ranks 73rd of 147 markets, with 1st the most expensive relative to home values.
Local planning note for Arlington
How Arlington compares with nearby cities
Arlington and its two nearest neighbors on this site, Fort Worth and Dallas, land within a few tenths of a point of each other when the typical new concrete driveway is set against the median home value.
BLS counts Arlington, Fort Worth and Dallas as one labor market for concrete finishers, so a cheaper new concrete driveway quote from the next city over reflects the contractor, not local pay.
| City | Typical job (midpoint) | Share of median home value | Pay for concrete finishers vs U.S. |
|---|---|---|---|
| Arlington | $4,790 | 1.6% | -14% |
| Fort Worth | $4,790 | 1.6% | -14% |
| Dallas | $4,790 | 1.5% | -14% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
When to plan this work in Arlington
When to pour a driveway in Arlington
For a new concrete driveway in Arlington, the simplest pours happen outside December and January, when the average low at the Arlington Municipal Airport weather station is under 40°F. Below that mark, ACI's cold-weather practices apply: pouring in the warmest part of the day and covering the slab so it can't freeze while it cures.
Heat is the other extreme: average highs reach 90°F or more in June through August in Arlington, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.
Arlington Concrete Driveway Pricing — 2026 Local Market
Concrete driveway cost in Arlington, TX: $4,040-$5,540 (typical job: 576 sq ft).
Arlington's weather and a new driveway
NOAA's normals count about 36 freezing nights a year in Arlington, compared with medians of 41 across Texas weather stations and 124 across U.S. stations.
With few freezing nights, freeze-thaw is a smaller factor; still ask for the concrete strength and thickness in writing.
Driveway work that touches the curb or sidewalk usually needs a city right-of-way permit even when the slab itself does not.
| Nights at or below 32°F | 36 |
|---|---|
| Yearly snowfall (nearby station) | 0.8 in |
| Yearly precipitation | 36.2 in |
| Contractor license (Texas) | No state general or remodeling license; some cities register contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
How Arlington compares with nearby cities
Labor rates
For concrete driveway in Arlington, contractors bill about $47-$61 per worker-hour for concrete finishers, whose median pay is $23.45 an hour. The difference covers insurance, taxes, overhead and profit.
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Arlington
Get every quote to include
- measured area, thickness, finish, and concrete specification
- excavation, subbase, reinforcement, joints, and drainage
- removal, haul-away, access, and site restoration
- whether curb, sidewalk, frontage, or right-of-way work is included
Frequently Asked Questions
How much does Concrete Driveway cost in Arlington, TX?
Concrete driveway cost in Arlington, TX: $4,040-$5,540 (typical job: 576 sq ft). The table near the top of the page prices each option separately.
How does pay for cement masons in the Dallas-Fort Worth-Arlington area compare with the national median?
Median pay for cement masons in the Dallas-Fort Worth-Arlington, TX metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How many 90-degree days does Arlington get?
About 106 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.
What climate zone is Arlington in?
Tarrant County is in climate zone 2A on the DOE's county list, which energy codes use to set insulation and window levels.
Ready for your own number?
We have already loaded Arlington prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)
We start from a national baseline and adjust it for Arlington (0.95×). How we estimate