Concrete Driveway Cost in Fort Worth, TX: 2026 Local Guide

Typical Fort Worth job · 576 sq ft
$4,040-$5,5409% below U.S.

Most Fort Worth homeowners pay $4,040-$5,540 for a 576 sq ft concrete driveway, 9% below the national typical job.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$2,530-$3,910
Most common
Plain gray concrete, broom finish
$4,040-$5,540
Premium
Stained or saw-cut patterns
$8,100-$11,140
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

The biggest driver is size: 10 x 20 ft (1 car, short) costs $1,690-$2,410 in Fort Worth, while 10 x 100 ft (long single) costs $6,700-$9,070, about 285% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 20 ft (1 car, short)$1,690-$2,410
12 x 24 ft (1 car)$2,240-$3,140
20 x 20 ft (2 car, short)$2,940-$4,070
24 x 24 ft (2 car)Most common$4,040-$5,540
24 x 36 ft (3 car)$5,850-$7,940
10 x 100 ft (long single)$6,700-$9,070

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

The gap between options is wide: stained or saw-cut patterns costs about 2.0 times as much as plain gray concrete, broom finish in Fort Worth, and resurfacing overlay (on sound old slab) trims about 33%.

TypeTypical jobInstalled
Gravel (for comparison)$1,530-$2,540$1.90-$3.13 installed
Resurfacing overlay (on sound old slab)$2,530-$3,910$3.64-$5.49 installed
Asphalt (for comparison)$3,020-$4,480$4.48-$6.49 installed
Plain gray concrete, broom finishMost common$4,040-$5,540$6.26-$8.32 installed
Swirl or trowel finish$4,260-$5,820$6.63-$8.81 installed
Rock salt finish$4,460-$6,130$6.99-$9.36 installed
Exposed aggregate$4,920-$6,730$7.78-$10.40 installed
Colored concrete$4,940-$6,810$7.81-$10.52 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$5,120-$7,080$8.12-$11.00 installed
Pervious (porous) concrete$5,820-$8,150$9.34-$12.86 installed
Stamped concrete$7,080-$9,670$11.54-$15.50 installed
Stained or saw-cut patterns$8,100-$11,140$13.31-$18.05 installed
Pavers (for comparison)$8,130-$11,430$13.35-$18.55 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Fort Worth driveway cost?

We have already loaded Fort Worth prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every concrete driveway job needs these, but ask about each one before you sign. In Fort Worth, the biggest line is "Apron / curb cut" at $703-$1,150 for the job.

  • Remove old driveway$2.23-$3.15 / sq ft
  • Rebar grid (instead of mesh)$0.99-$2.23 / sq ft
  • Fiber reinforcement$0.43-$0.64 / sq ft
  • 6 in. slab instead of 4 in.$1.17-$1.56 / sq ft
  • Apron / curb cut$703-$1,150 / job
  • Heated driveway (hydronic or electric)$13.52-$22.40 / sq ft
  • Sealer$0.34-$0.47 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Fort Worth different for this job

Fort Worth homes and the local housing stock

What a driveway costs against a Fort Worth home

In Fort Worth, a city of mostly houses (68% of units), a driveway is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

The midpoint of the range above is about 1.6% of Fort Worth's $303,000 median home value, the 72nd highest share for a new concrete driveway among 147 markets and near the middle of the pack.

Local planning note for Fort Worth

How Fort Worth compares with nearby cities

Against home values, a new concrete driveway weighs about the same in Fort Worth, Arlington and Dallas: 1.6% of the median home here, 1.6% and 1.5% next door.

BLS counts Fort Worth, Arlington and Dallas as one labor market for concrete finishers, so a cheaper new concrete driveway quote from the next city over reflects the contractor, not local pay.

CityTypical job (midpoint)Share of median home valuePay for concrete finishers vs U.S.
Fort Worth$4,7901.6%-14%
Arlington$4,7901.6%-14%
Dallas$4,7901.5%-14%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

When to plan this work in Fort Worth

When to pour a driveway in Fort Worth

For a new concrete driveway in Fort Worth, the simplest pours happen outside December and January, when the average low at the Ft Worth Meacham Field Naaf weather station is under 40°F. Below that mark, ACI's cold-weather practices apply: pouring in the warmest part of the day and covering the slab so it can't freeze while it cures.

Heat is the other extreme: average highs reach 90°F or more in June through August in Fort Worth, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.

Fort Worth Concrete Driveway Pricing — 2026 Local Market

Concrete driveway cost in Fort Worth, TX: $4,040-$5,540 (typical job: 576 sq ft).

Driveway concrete for Fort Worth's climate

NOAA's normals count about 30 freezing nights a year in Fort Worth, compared with medians of 41 across Texas weather stations and 124 across U.S. stations.

With few freezing nights, freeze-thaw is a smaller factor; still ask for the concrete strength and thickness in writing.

Driveway work that touches the curb or sidewalk usually needs a city right-of-way permit even when the slab itself does not.

Driveways in Fort Worth at a glance
Nights at or below 32°F30
Yearly snowfall (nearby station)2.0 in
Yearly precipitation35.3 in
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Nearby pricing

How Fort Worth compares with nearby cities

Labor

Labor rates

On a concrete driveway job in Fort Worth, concrete finishers earn a median $23.45 an hour. After insurance, payroll taxes and overhead, contractors bill about $47-$61 per worker-hour.

Cement Masons and Concrete Finishers

$23.45/hrMedian pay
$47-$61/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Fort Worth

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included

Driveway permits in Fort Worth

In Fort Worth, driveway flatwork on your own property does not need a permit, but new or repaired driveway approaches and sidewalks in the parkway require a parkway permit pulled by a bonded contractor.

Check with Fort Worth Development Services which part of a driveway project is in the parkway.

City of Fort Worth Development Services: Residential Permitting page · Checked October 11, 2026

Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Fort Worth, TX?

Concrete driveway cost in Fort Worth, TX: $4,040-$5,540 (typical job: 576 sq ft). Each option in the price table above has its own range.

How does pay for cement masons in the Dallas-Fort Worth-Arlington area compare with the national median?

Median pay for cement masons in the Dallas-Fort Worth-Arlington, TX metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Fort Worth get?

About 114 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Fort Worth in?

Tarrant County is in climate zone 2A on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Fort Worth prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

This estimate is NumeralQ's national baseline with a Fort Worth adjustment of 0.96×. How we estimate

$4,040-$5,540NumeralQ planning estimate
Get my estimate