Concrete driveway cost by size
Size moves the price more than anything else. In Dallas, going from 10 x 20 ft (1 car, short) to 10 x 100 ft (long single) takes the job from $1,690-$2,410 to $6,700-$9,070, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 10 x 20 ft (1 car, short) | $1,690-$2,410 |
| 12 x 24 ft (1 car) | $2,240-$3,140 |
| 20 x 20 ft (2 car, short) | $2,940-$4,070 |
| 24 x 24 ft (2 car)Most common | $4,040-$5,540 |
| 24 x 36 ft (3 car) | $5,850-$7,940 |
| 10 x 100 ft (long single) | $6,700-$9,070 |
Installed: Plain gray concrete, broom finish
Concrete driveway cost by material or type
The gap between options is wide: stained or saw-cut patterns costs about 2.0 times as much as plain gray concrete, broom finish in Dallas, and resurfacing overlay (on sound old slab) trims about 33%.
| Type | Typical job | Installed |
|---|---|---|
| Gravel (for comparison) | $1,530-$2,540 | $1.90-$3.13 installed |
| Resurfacing overlay (on sound old slab) | $2,530-$3,910 | $3.64-$5.49 installed |
| Asphalt (for comparison) | $3,020-$4,480 | $4.48-$6.49 installed |
| Plain gray concrete, broom finishMost common | $4,040-$5,540 | $6.26-$8.32 installed |
| Swirl or trowel finish | $4,260-$5,820 | $6.63-$8.81 installed |
| Rock salt finish | $4,460-$6,130 | $6.99-$9.36 installed |
| Exposed aggregate | $4,920-$6,730 | $7.78-$10.40 installed |
| Colored concrete | $4,940-$6,810 | $7.81-$10.52 installed |
Show 5 more options
| Type | Typical job | Installed |
|---|---|---|
| Broom finish with stamped border | $5,120-$7,080 | $8.12-$11.00 installed |
| Pervious (porous) concrete | $5,820-$8,150 | $9.34-$12.86 installed |
| Stamped concrete | $7,080-$9,670 | $11.54-$15.50 installed |
| Stained or saw-cut patterns | $8,100-$11,140 | $13.31-$18.05 installed |
| Pavers (for comparison) | $8,130-$11,430 | $13.35-$18.55 installed |
Materials include waste and contractor markup. Typical job: 576 sq ft
What will your Dallas driveway cost?
We have already loaded Dallas prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every concrete driveway job needs these, but ask about each one before you sign. In Dallas, the biggest line is "Apron / curb cut" at $703-$1,150 for the job.
- Remove old driveway$2.23-$3.15 / sq ft
- Rebar grid (instead of mesh)$0.99-$2.23 / sq ft
- Fiber reinforcement$0.43-$0.64 / sq ft
- 6 in. slab instead of 4 in.$1.17-$1.56 / sq ft
- Apron / curb cut$703-$1,150 / job
- Heated driveway (hydronic or electric)$13.52-$22.40 / sq ft
- Sealer$0.34-$0.47 / sq ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old driveway | $0.34-$0.69 / sq ft |
| Rebar grid (instead of mesh) | $0.52-$1.61 / sq ft |
| Fiber reinforcement | $0.11-$0.23 / sq ft |
| 6 in. slab instead of 4 in. | $0.92-$1.24 / sq ft |
| Apron / curb cut | $173-$460 / job |
| Heated driveway (hydronic or electric) | $6.90-$13.80 / sq ft |
| Sealer | $0.11-$0.18 / sq ft |
Installed price per unit
What makes Dallas different for this job
Dallas homes and the local housing stock
What a driveway costs against a Dallas home
With 55% of units in multi-unit buildings, a driveway in Dallas often needs association approval, and HOA rules can set materials and colors.
A typical new concrete driveway at the midpoint price equals roughly 1.5% of what the median Dallas home is worth ($320,700), 79th of the 147 markets NumeralQ covers.
Local planning note for Dallas
Dallas next to Plano and Arlington
Dallas sits between its neighbors: a typical new concrete driveway is 1.5% of the median home value here, 1.6% in Arlington and 1.0% in Plano.
Dallas, Plano and Arlington share one BLS metro pay figure for concrete finishers (Dallas-Fort Worth-Arlington, TX), so labor rates alone don't explain a gap between new concrete driveway quotes in these cities.
| City | Typical job (midpoint) | Share of median home value | Pay for concrete finishers vs U.S. |
|---|---|---|---|
| Dallas | $4,790 | 1.5% | -14% |
| Plano | $4,790 | 1.0% | -14% |
| Arlington | $4,790 | 1.6% | -14% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
When to plan this work in Dallas
When to pour a driveway in Dallas
For a new concrete driveway in Dallas, the simplest pours happen outside December and January, when the average low at the Dallas FAA Airport weather station is under 40°F. Below that mark, ACI's cold-weather practices apply: pouring in the warmest part of the day and covering the slab so it can't freeze while it cures.
Heat is the other extreme: average highs reach 90°F or more in June through September in Dallas, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.
Dallas's weather and a new driveway
Dallas averages 23 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 41 at the median Texas station and 124 at the median U.S. station.
Freezing is limited here, so mix choice is mostly about strength and finish; ask the contractor to name the mix and its strength in the quote.
A new curb cut or apron usually needs a permit from the city's public works or right-of-way office.
| Nights at or below 32°F | 23 |
|---|---|
| Yearly snowfall (nearby station) | 1.7 in |
| Yearly precipitation | 38.3 in |
| Contractor license (Texas) | No state general or remodeling license; some cities register contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
Driveways and fences in Dallas Conservation Districts
District/overlay only
Within a Dallas Conservation District, driveways, walkways, retaining walls and other flatwork, as well as fences, go through Conservation District work review. Flatwork submittals need a scaled site plan of the whole site and material specifications, and fence submittals show existing and proposed materials and heights.
Requirements vary by district, and the city recommends consulting staff before fencing in Conservation District 10 (Greenway Parks).
City of Dallas: Conservation District Submittal Requirements and Work Review Form (rev. April 11, 2023) · Checked October 10, 2026
How Dallas compares with nearby cities
Labor rates
On a concrete driveway job in Dallas, concrete finishers earn a median $23.45 an hour. After insurance, payroll taxes and overhead, contractors bill about $47-$61 per worker-hour.
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Dallas
Get every quote to include
- measured area, thickness, finish, and concrete specification
- excavation, subbase, reinforcement, joints, and drainage
- removal, haul-away, access, and site restoration
- whether curb, sidewalk, frontage, or right-of-way work is included
Frequently Asked Questions
How much does Concrete Driveway cost in Dallas, TX?
Concrete driveway cost in Dallas, TX: $4,040-$5,540 (typical job: 576 sq ft). The table above breaks it out by option.
How does pay for cement masons in the Dallas-Fort Worth-Arlington area compare with the national median?
Median pay for cement masons in the Dallas-Fort Worth-Arlington, TX metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How many 90-degree days does Dallas get?
About 108 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.
What climate zone is Dallas in?
Dallas County is in climate zone 2A on the DOE's county list, which energy codes use to set insulation and window levels.
Ready for your own number?
We have already loaded Dallas prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)
We start from a national baseline and adjust it for Dallas (0.97×). How we estimate