Fence Installation Cost in Dallas, TX: 2026 Local Guide

Typical Dallas job · 150 linear ft
$2,820-$4,8305% below U.S.

Plan on $2,820-$4,830 for 150 linear ft of new fence in Dallas, 5% under the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$630-$1,280
Most common
Wood privacy, 6 ft pressure-treated
$2,820-$4,830
Premium
Composite privacy, 6 ft
$6,170-$9,680
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Dallas the range runs from $600-$1,000 for 25 linear ft to $7,260-$12,470 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$600-$1,000
50 linear ft$1,040-$1,770
100 linear ft$1,930-$3,300
150 linear ftMost common$2,820-$4,830
200 linear ft$3,710-$6,360
300 linear ft$5,480-$9,420
400 linear ft$7,260-$12,470

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Dallas. Farm wire or electric runs $630-$1,280, about 75% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,170-$9,680.

TypeTypical jobInstalled
Farm wire or electric$630-$1,280$3.17-$6.95 installed
Split rail (2-3 rail)$1,330-$2,000$7.84-$11.77 installed
Chain link, 4 ft galvanized$2,140-$3,220$13.22-$19.84 installed
Wood picket, 4 ft$2,760-$3,980$17.35-$24.92 installed
Wood privacy, 6 ft pressure-treatedMost common$2,820-$4,830$17.75-$30.58 installed
Cedar privacy, 6 ft$3,500-$5,420$22.28-$34.55 installed
Vinyl privacy, 6 ft$3,680-$6,000$23.47-$38.42 installed
Steel ornamental, 4-5 ft$4,000-$6,180$25.64-$39.61 installed
Aluminum ornamental, 4-5 ft$4,390-$6,410$28.19-$41.12 installed
Composite privacy, 6 ft$6,170-$9,680$40.08-$62.97 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Dallas fence cost?

We have already loaded Dallas prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Dallas is "Drive gate (double)" at $1,160-$2,880 each, so ask whether it is included.

  • Walk gate$278-$567 / each
  • Drive gate (double)$1,160-$2,880 / each
  • Remove old fence$3.04-$3.95 / linear ft
  • Sloped or rocky ground (extra per ft)$2.16-$3.79 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Dallas different for this job

Dallas homes and the local housing stock

A fence against the value of a Dallas home

Only 45% of units in Dallas are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.

Against the $320,700 median home value, a typical new fence in Dallas costs about 1.2% of the house. That ranks 71st of 147 markets, with 1st the most expensive relative to home values.

Local planning note for Dallas

Dallas, Plano and Arlington side by side

Relative to home values, Dallas falls in the middle, with a new fence at 1.2% of the median home, below Arlington and above Plano.

Getting new fence bids from outside Dallas? The Plano and Arlington pages below show the full price ranges there.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Dallas$3,8251.2%-22% (state figure)
Plano$3,8250.8%-22% (state figure)
Arlington$3,8251.3%-22% (state figure)

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Local rules and records for Dallas

Fence rules in Dallas

RuleValue
Front yard4 ft in the required front yard (single-family and duplex)
Back and side yard9 ft (side and rear yards)
Permit neededFence permit over 4 ft in a front yard or over 6 ft elsewhere; over 9 ft needs Board of Adjustment approval, a building permit and an engineer's seal

Dallas Development Code 51A-4.602; apply in DallasNow as a Residential Accessory Structure.

Before you fence in Dallas

NOAA's climate normals count about 23 freezing nights a year in Dallas, against 41 at the median Texas station and 124 at the median U.S. station.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Dallas at a glance
Nights at or below 32°F23
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Fence permits in Dallas

In Dallas, a fence permit is required for fences over 4 feet tall in a front yard or over 6 feet elsewhere, and the maximum fence height is 9 feet unless the Board of Adjustment approves more. Sheet or corrugated metal, fiberglass panels, plywood and most plastic are prohibited fence materials.

Fences in Conservation and Historic Districts need a Certificate of Appropriateness, and fences in an easement need written utility authorization.

City of Dallas: Fence Permit, Pool Barrier and Retaining Wall Checklist (26-001) · Checked October 10, 2026

Driveways and fences in Dallas Conservation Districts

Within a Dallas Conservation District, driveways, walkways, retaining walls and other flatwork, as well as fences, go through Conservation District work review. Flatwork submittals need a scaled site plan of the whole site and material specifications, and fence submittals show existing and proposed materials and heights.

Requirements vary by district, and the city recommends consulting staff before fencing in Conservation District 10 (Greenway Parks).

City of Dallas: Conservation District Submittal Requirements and Work Review Form (rev. April 11, 2023) · Checked October 10, 2026

Nearby pricing

How Dallas compares with nearby cities

Labor

Labor rates

For fence installation in Dallas, contractors bill about $36-$47 per worker-hour for fence erectors, whose median pay is $17.92 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$17.92/hrMedian pay
$36-$47/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Dallas

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Dallas, TX?

Fence installation cost in Dallas, TX: $2,820-$4,830 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?

Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Dallas County?

NOAA logged 128 thunderstorm wind reports of 58 mph or more in Dallas County from 2016 to 2025.

How much snow does Dallas get in a typical year?

About 1.7 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Dallas prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • City of Dallas Fence Permit Application Checklist; Dev. Code 51A-4.602, checked 2026-10-26 (https://dallascityhall.com/departments/sustainabledevelopment/DCH%20documents/pdf/Building/FencePermit.pdf)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

NumeralQ planning estimate. How we estimate

$2,820-$4,830NumeralQ planning estimate
Get my estimate