Fence Installation Cost in Frisco, TX: 2026 Local Guide

Typical Frisco job · 150 linear ft
$2,820-$4,8305% below U.S.

Most Frisco homeowners pay $2,820-$4,830 for 150 linear ft of new fence, about 5% less than the same job nationally.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$630-$1,280
Most common
Wood privacy, 6 ft pressure-treated
$2,820-$4,830
Premium
Composite privacy, 6 ft
$6,170-$9,680
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Frisco the range runs from $600-$1,000 for 25 linear ft to $7,260-$12,470 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$600-$1,000
50 linear ft$1,040-$1,770
100 linear ft$1,930-$3,300
150 linear ftMost common$2,820-$4,830
200 linear ft$3,710-$6,360
300 linear ft$5,480-$9,420
400 linear ft$7,260-$12,470

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

In Frisco, farm wire or electric comes in about 75% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.1 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,820-$4,830).

TypeTypical jobInstalled
Farm wire or electric$630-$1,280$3.17-$6.95 installed
Split rail (2-3 rail)$1,330-$2,000$7.84-$11.77 installed
Chain link, 4 ft galvanized$2,140-$3,220$13.22-$19.84 installed
Wood picket, 4 ft$2,760-$3,980$17.35-$24.92 installed
Wood privacy, 6 ft pressure-treatedMost common$2,820-$4,830$17.75-$30.58 installed
Cedar privacy, 6 ft$3,500-$5,420$22.28-$34.55 installed
Vinyl privacy, 6 ft$3,680-$6,000$23.47-$38.42 installed
Steel ornamental, 4-5 ft$4,000-$6,180$25.64-$39.61 installed
Aluminum ornamental, 4-5 ft$4,390-$6,410$28.19-$41.12 installed
Composite privacy, 6 ft$6,170-$9,680$40.08-$62.97 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Frisco fence cost?

We have already loaded Frisco prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Frisco is "Drive gate (double)" at $1,160-$2,880 each, so ask whether it is included.

  • Walk gate$278-$567 / each
  • Drive gate (double)$1,160-$2,880 / each
  • Remove old fence$3.04-$3.95 / linear ft
  • Sloped or rocky ground (extra per ft)$2.16-$3.79 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Frisco different for this job

Frisco homes and the local housing stock

Frisco lots and fences

72% of Frisco units are houses with their own lots, and 66% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

High home values make the new fence a small slice in Frisco: about 0.6% of the $642,100 median home, the 14th lowest among the 147 markets we price.

Local planning note for Frisco

How Frisco compares with nearby cities

Next to Plano and McKinney, a new fence is the lightest lift in Frisco relative to home value, at 0.6% of the median home.

Getting new fence bids from outside Frisco? The Plano and McKinney pages below show the full price ranges there.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.Permit for a 150 ft fence
Frisco$3,8250.6%-22% (state figure)Not published
Plano$3,8250.8%-22% (state figure)Not published
McKinney$3,8250.8%-22% (state figure)$30

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Local rules and records for Frisco

Fence rules in Frisco

RuleValue
Front yard4 ft in front of the house
Back and side yard8 ft (side and rear)
Permit neededFence permit for all fences except repairs of up to 2 sections or 16 ft
SetbackNo part may extend past a property line

Frisco's climate and fence work

Frisco averages 35 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 41 across Texas weather stations and 124 across U.S. stations.

In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Frisco at a glance
Nights at or below 32°F35
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Fence permits in Frisco

In Frisco, the city requires a fence permit for all fences built, except when repairing or replacing a portion limited to two sections or 16 feet. Fences may be up to 8 feet in rear and side yards and 4 feet in front of the main structure, and no fence may extend past a property line.

Many subdivisions also require separate HOA approval, and fences near pools have added requirements.

City of Frisco FAQ: What do I need to install or repair a residential fence? · Checked October 10, 2026

Nearby pricing

How Frisco compares with nearby cities

Labor

Labor rates

On a fence installation job in Frisco, fence erectors earn a median $17.92 an hour. After insurance, payroll taxes and overhead, contractors bill about $36-$47 per worker-hour.

Fence Erectors

$17.92/hrMedian pay
$36-$47/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Frisco

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Frisco, TX?

Fence installation cost in Frisco, TX: $2,820-$4,830 (typical job: 150 linear ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?

Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Collin County?

NOAA logged 101 thunderstorm wind reports of 58 mph or more in Collin County from 2016 to 2025.

How much snow does Frisco get in a typical year?

About 2.6 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Frisco prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • City of Frisco FAQ, What do I need to install or repair a residential fence?, checked 2026-10-26 (https://www.friscotexas.gov/Faq.aspx?QID=449)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

NumeralQ planning estimate. How we estimate

$2,820-$4,830NumeralQ planning estimate
Get my estimate