Fence installation cost by size
Size moves the price more than anything else. In McKinney, going from 25 linear ft to 400 linear ft takes the job from $600-$1,000 to $7,260-$12,470, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 25 linear ft | $600-$1,000 |
| 50 linear ft | $1,040-$1,770 |
| 100 linear ft | $1,930-$3,300 |
| 150 linear ftMost common | $2,820-$4,830 |
| 200 linear ft | $3,710-$6,360 |
| 300 linear ft | $5,480-$9,420 |
| 400 linear ft | $7,260-$12,470 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In McKinney, farm wire or electric comes in about 75% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.1 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,820-$4,830).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $630-$1,280 | $3.17-$6.95 installed |
| Split rail (2-3 rail) | $1,330-$2,000 | $7.84-$11.77 installed |
| Chain link, 4 ft galvanized | $2,140-$3,220 | $13.22-$19.84 installed |
| Wood picket, 4 ft | $2,760-$3,980 | $17.35-$24.92 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,820-$4,830 | $17.75-$30.58 installed |
| Cedar privacy, 6 ft | $3,500-$5,420 | $22.28-$34.55 installed |
| Vinyl privacy, 6 ft | $3,680-$6,000 | $23.47-$38.42 installed |
| Steel ornamental, 4-5 ft | $4,000-$6,180 | $25.64-$39.61 installed |
| Aluminum ornamental, 4-5 ft | $4,390-$6,410 | $28.19-$41.12 installed |
| Composite privacy, 6 ft | $6,170-$9,680 | $40.08-$62.97 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your McKinney fence cost?
We have already loaded McKinney prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 4 extras are where quotes most often grow. The largest single line in McKinney is "Drive gate (double)" at $1,160-$2,880 each, so ask whether it is included.
- Walk gate$278-$567 / each
- Drive gate (double)$1,160-$2,880 / each
- Remove old fence$3.04-$3.95 / linear ft
- Sloped or rocky ground (extra per ft)$2.16-$3.79 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes McKinney different for this job
McKinney homes and the local housing stock
Who builds fences in McKinney
73% of McKinney units are houses with their own lots, and 64% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
High home values make the new fence a small slice in McKinney: about 0.8% of the $471,800 median home, the 31st lowest among the 147 markets we price.
McKinney permit fees for this job
Permit fees: what McKinney charges
A new fence in McKinney, or replacing more than half of an old one, needs a $30 permit.
Put another way, the permit adds about 0.9% to a typical new fence in McKinney. McKinney has the 9th lowest fence permit cost of the 31 cities we priced. In Houston, the same job's permit is about $85, so McKinney charges less than Houston.
Against home values, a new fence costs McKinney and Plano owners the same share, 0.8% of the median home, while Frisco is at 0.6%.
If you're comparing new fence bids from Frisco or Plano with bids from McKinney, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| McKinney | $3,825 | 0.8% | -22% (state figure) | $30 |
| Frisco | $3,825 | 0.6% | -22% (state figure) | Not published |
| Plano | $3,825 | 0.8% | -22% (state figure) | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Local rules and records for McKinney
Fence rules in McKinney
| Rule | Value |
|---|---|
| Front yard | 48 in, at least 50% open |
| Back and side yard | 8 ft 6 in |
| Permit needed | permit if height, location or material changes (new fence or >50% replacement); $30 fee |
| Survey | site plan must show property lines, fence location, height, material |
Historic District: 4 ft, 50% transparent, Certificate of Appropriateness
Before you fence in McKinney
McKinney averages 45 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 41 at the median Texas station and 124 at the median U.S. station.
In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.
The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 45 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Texas) | No state general or remodeling license; some cities register contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
Permits for re-roofing, solar and fences in McKinney
City rule
In McKinney, Texas, the city's code lists re-roof permits and solar additions among its single-family building permit items, and lists a separate fence installation permit, showing that the city issues its own permits for residential re-roofing, solar additions and fence installation.
The code items do not say which small repairs, if any, are exempt; check with McKinney's building inspections office before planning a partial roof repair.
McKinney Code of Ordinances, Appendix A, Secs. 122-29 and 150-601D; McKinney Code of Ordinances, Appendix A, Secs. 122-29 and 150-601D; McKinney Code of Ordinances, Appendix A, Secs. 122-29 and 150-601D · Checked October 13, 2026
How McKinney compares with nearby cities
Labor rates
For fence installation in McKinney, contractors bill about $36-$47 per worker-hour for fence erectors, whose median pay is $17.92 an hour. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in McKinney
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in McKinney, TX?
Fence installation cost in McKinney, TX: $2,820-$4,830 (typical job: 150 linear ft). Each option in the price table above has its own range.
How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?
Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Collin County?
NOAA logged 101 thunderstorm wind reports of 58 mph or more in Collin County from 2016 to 2025.
How much snow does McKinney get in a typical year?
About 2.6 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded McKinney prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://www.mckinneytexas.org/259/Fence-Permits
- McKinney - Fence Permits, checked 2026-10-26 (https://www.mckinneytexas.org/259/Fence-Permits)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- City of McKinney Building Inspections, Residential Roofing Permit and Fence Permits. https://www.mckinneytexas.org/259/Fence-Permits (retrieved 2026-10-26)
- City of McKinney Building Inspections. https://www.mckinneytexas.org/DocumentCenter/View/7376/Residential-Roofing-Permit (retrieved 2026-10-26)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- NOAA Storm Events Database source
This estimate is NumeralQ's national baseline with a McKinney adjustment of 0.99×. How we estimate