HVAC Replacement Cost in Arlington, TX (2026)

2026 Market Overview

Arlington HVAC Replacement Pricing — 2026 Local Market

In Arlington, TX, the typical hvac replacement cost project costs $6,650–$14,250 (typical project range). With a hot with significant hail risk climate, Arlington is below the national average, one of the more competitive markets in the region.

📍

Overall project costs in Arlington run roughly 5% below NumeralQ's national planning baseline, giving local homeowners a cost advantage versus major metro markets.

Cost Comparison by Material — Arlington

Central A/C Unit Only 15–20 years

$5,225

Gas Furnace + A/C Split System 15–25 years

$10,450

Heat Pump System (full) 15–20 years

$12,350

Model midpoints for a typical project size use the city multiplier applied to the national planning baseline. They are not contractor quotes.

HVAC Replacement Cost by Type in Arlington

System Type	Installed Cost (Arlington)	Lifespan
Central A/C Unit Only	$3,325 – $7,125	15–20 years
Gas Furnace + A/C Split System	$6,650 – $14,250	15–25 years
Heat Pump System (full)	$7,600 – $17,100	15–20 years

NumeralQ applies a city multiplier to its national planning baseline; it does not use live Arlington labor-rate data. Get itemized quotes from licensed local contractors for project-specific accuracy.

Local HVAC context

HVAC Replacement Context for Arlington, TX

Census measures use Arlington city, Texas (incorporated place; GEOID 1600000US4804000) as a statistical proxy for Arlington. This is not a NumeralQ service boundary.

Findings and geographic context

Station-based heating and cooling context

2,126.3 HDD65 2,823.7 CDD65

Annual sums of NOAA/NCEI 1991–2020 monthly base-65°F normals at ARLINGTON MUNI AP, TX US (station USW00053907). This is station-point context, not a value for every address.

Reported primary heating fuel

26.5% utility gas 71.0% electricity

Shares of occupied housing units in Arlington city, Texas reporting each as their primary heating fuel, not equipment or address-level service.

Housing-stock construction period

33.4% built before 1980

A descriptive estimate for housing units in the accepted Census geography; it does not identify HVAC system characteristics.

Housing-stock structure type

59.8% one-unit detached

A descriptive share of housing units in the accepted Census geography, not a measure of equipment or installation conditions.

Sources / provenance

Climate: NOAA/NCEI, U.S. Climate Normals 1991-2020, station USW00053907 (ARLINGTON MUNI AP, TX US): monthly station normals and station inventory.
Housing data: U.S. Census Bureau, ACS 2024 5-year (2020–2024), Table B25040 (Occupied housing units); Table B25034 (Housing units); Table B25024 (Housing units). Accepted geography: Arlington city, Texas (incorporated place, GEOID 1600000US4804000).
Census geography record: U.S. Census Bureau, ACS 2024 5-year geography definitions (Geos20245YR.txt).

Source records, estimates, margins of error, and methods

NOAA station record: ARLINGTON MUNI AP, TX US (USW00053907); 32.6636, -97.0939; elevation 192 m. Station-to-routing-point distance: 6.646 km. Nearest station, by Haversine distance to project routing point, among NOAA 1991-2020 monthly-normal station files with complete HDD65 and CDD65 for months 01-12; tie-break by station ID.

HDD65 and CDD65 are annual sums of 12 monthly base-65°F values from the 1991-2020 normals. They describe the station point, not a market average.

Accepted Census geography: Arlington city, Texas; incorporated place; GEOID 1600000US4804000; ACS 2024 5-year (2020-2024).

utility gas: 37,748 occupied units (published MOE 1,401); derived share 26.5% of 142,455 occupied housing units.
electricity: 101,176 occupied units (published MOE 2,052); derived share 71.0% of 142,455 occupied housing units.
B25034 pre-1980 housing units: 51,195 of 153,137; derived share 33.4%. Approximate aggregate MOE: 1,664, calculated as root-sum-square of source-category MOEs.
B25024 one-unit detached: 91,588 housing units (published category MOE 1,408) of 153,137; derived share 59.8%.

ACS percentages are derived point estimates. No ratio MOE is calculated for the derived shares; the published category estimate/MOE and denominator are shown above.

B25034’s aggregate MOE is an approximation from component MOEs, not a separately published table value.

Scope: NOAA HDD65/CDD65 is one station-based climate evidence family; the Census tables form one ACS evidence family. ACS values describe reported housing-unit measures for the named statistical geography, not an individual property.

What Affects HVAC Replacement Cost in Arlington?

System size (tonnage): Proper sizing requires a Manual J load calculation — never guess.
SEER efficiency rating: Higher efficiency costs 20–40% more upfront.
Ductwork condition: Leaky or undersized ducts add $1,000–$5,000 to address.
Permits and inspections: Required in all jurisdictions: $150–$500.
Zoning systems: Multiple zones add $1,500–$4,000 for dampers and controls.
Fuel type: All-electric heat pump vs. gas+AC split systems vary in equipment cost.

📊 This estimate applies NumeralQ's national HVAC baseline adjusted for this city's market multiplier. See also our 2026 HVAC Pricing Trends research.

📈 Projects with strong resale value or utility savings may qualify for lower-risk financing terms. See our Heat Pump vs. Furnace: 10-Year Cost Guide for cost and payback analysis.

📊

How NumeralQ Estimates HVAC Replacement Costs in Arlington

Our estimates apply a national planning baseline adjusted by a city-specific market multiplier — producing a local cost range for typical project scope. Not crowdsourced averages.

📊 Related Research

HVAC Pricing Trends 2026 Market-by-market HVAC pricing data and equipment cost trends. Heat Pump Adoption by Climate Zone Climate-zone guidance for heat pump vs. traditional systems. Most Expensive HVAC Markets Which cities pay the most for HVAC — and why.

Frequently Asked Questions — Arlington HVAC Replacement

How much does HVAC Replacement cost in Arlington, TX?

In Arlington, the typical hvac replacement project runs $6,650–$14,250 (typical project range). Arlington prices are below the national average, offering competitive value in the local market. Get at least 3 itemized written bids — pricing variation between contractors for identical scope typically ranges 20–40% in any local market.

What should I compare when choosing HVAC equipment in Arlington?

Compare the specific unit’s condition and manufacturer-approved protection, equipment documentation, and the full installation scope. Actual energy use and costs depend on the property, selected equipment, usage, and utility terms; this page does not forecast household bills.

How do I verify a hvac replacement contractor is licensed in Arlington, TX?

However, HVAC contractors must hold a Technician Certification from the Texas Department of Licensing and Regulation (TDLR), and plumbers require a TSBPE (Texas State Board of Plumbing Examiners) license. Confirm active general liability insurance (minimum $1M) and workers' compensation coverage. Get written proof of both before work starts.

📊

Market Insight

Refrigerant regulation changes (R-22 phase-out, R-410A transition) added $300–$800 to average system costs in 2024–2026. Systems using R-32 or R-454B are the new standard.

View local evidence & sources →