HVAC Replacement Cost in Texas: 2026 City-by-City Guide

Typical Texas job · 3-ton system
$8,220-$13,950About the U.S. price

Plan on $8,220-$13,950 for a new 3-ton HVAC system in Texas, in line with what the same job costs nationally.

Local pay matters for HVAC replacement: median pay for HVAC technicians in Texas is 5% below the national median.

Your options

Budget
Ductless mini-split, single zone
$3,070-$4,810
Most common
Central AC + gas furnace (split system)
$8,220-$13,950
Premium
Dual-fuel (heat pump + gas furnace)
$9,080-$14,940
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

HVAC replacement cost by size

Find your size in the table. In Texas the range runs from $5,300-$8,680 for 1.5 tons to $12,120-$20,970 for 5 tons; a quote that does not state the measured size is hard to compare.

SizeCost
1.5 tons$5,300-$8,680
2 tons$6,270-$10,440
2.5 tons$7,240-$12,200
3 tonsMost common$8,220-$13,950
3.5 tons$9,190-$15,710
4 tons$10,170-$17,460
5 tons$12,120-$20,970
Cost by material

HVAC replacement cost by material or type

In Texas, ductless mini-split, single zone comes in about 64% under central AC + gas furnace (split system), and dual-fuel (heat pump + gas furnace) runs roughly 1.1 times the price, so get each option you are weighing priced on the same quote (central AC + gas furnace (split system) here: $8,220-$13,950).

What will your Texas HVAC system cost?

We have already loaded Texas prices for this HVAC replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Arlington$8,290-$14,040Arlington
Austin$8,340-$14,110Austin
Dallas$8,290-$14,040Dallas
Fort Worth$8,290-$14,040Fort Worth
Frisco$8,290-$14,040Frisco
Houston$8,270-$14,010Houston
McKinney$8,290-$14,040McKinney
Plano$8,290-$14,040Plano
Round Rock$8,340-$14,110Round Rock
San Antonio$8,250-$13,990San Antonio
Sugar Land$8,270-$14,010Sugar Land
The Woodlands (CDP)$8,270-$14,010The Woodlands
State conditions

State conditions

Local planning note for Texas

Texas city by city: what actually changes

For HVAC replacements, pay for HVAC technicians ranges from 4% below the U.S. median in San Antonio to about the same as the U.S. median in Austin, a 4-point gap that shows up most in labor-heavy bids. Permit fees vary more than labor. For the same standard job, Houston charges about $321 and San Antonio about $83; Arlington, Austin, Dallas, Fort Worth, Frisco, McKinney, Plano, Round Rock, Sugar Land and The Woodlands do not publish a figure we could price.

Heat-wave risk, per FEMA, is Very High in Dallas County but Relatively Moderate in Montgomery County (The Woodlands), a reason to insist on a proper load calculation where summers run hottest. Home values change how big the bill feels: the typical job is 4.7% of the median home in San Antonio but 1.7% in Frisco.

CityPay for HVAC technicians vs U.S.HVAC permit ($12,000 job)FEMA heat-wave risk (county)Typical job as share of median home value
Arlington-2%Not publishedRelatively High3.7%
Austin0%Not publishedRelatively High2.0%
Dallas-2%Not publishedVery High3.5%
Fort Worth-2%Not publishedRelatively High3.7%
Frisco-2%Not publishedRelatively High1.7%
Houston-3%$321Very High4.0%
McKinney-2%Not publishedRelatively High2.4%
Plano-2%Not publishedRelatively High2.4%
Round Rock0%Not publishedRelatively Moderate2.7%
San Antonio-4%$83Relatively High4.7%
Sugar Land-3%Not publishedRelatively High2.6%
The Woodlands-3%Not publishedRelatively Moderate2.2%

Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.

Local planning note for Texas

Does Texas charge sales tax on contractor labor?

Labor to repair or remodel a home isn't taxable in Texas; the contractor pays tax on materials (on a lump-sum job) or charges it only on separately listed materials (Tex. Tax Code 151.0047; Rule 3.357). An HVAC replacement invoice that charges tax on labor is worth questioning.

Labor

Labor rates

On an HVAC replacement job in Texas, HVAC technicians earn a median $27.77 an hour. After insurance, payroll taxes and overhead, contractors bill about $56-$72 per worker-hour.

Before you sign

Before you sign in Texas

Get every quote to include

  • equipment model, capacity, efficiency, and documented load calculation
  • ductwork, electrical, condensate, venting, and controls
  • removal, startup, commissioning, and homeowner instructions
  • who checks and documents any required permits or inspections

Local planning note for Texas

Contract and deposit rules in Texas

In Texas, a contractor with a written contract over $5,000 to improve your homestead must keep your payments in a separate construction account at a bank (Tex. Prop. Code 162.006). For an HVAC replacement, keep the signed contract, every receipt and the contractor's license or registration number, since a fund claim or complaint depends on them.

Local planning note for Texas

Mechanic's liens and lien waivers in Texas

A mechanic's lien is a claim against your house by someone who worked on your HVAC replacement or supplied material for it and wasn't paid. A Texas homestead can be liened only if a written contract was signed before work began, by both spouses if married, and filed with the county clerk (Prop. Code 53.254). You must also hold back 10% of the price until 30 days after completion (53.101).

The contractor owes you a "Know Your Rights and Responsibilities" disclosure before you sign (53.255), and Texas waivers must follow the statutory forms (53.284). With an HVAC replacement, the supply house that sold the condenser and air handler is the lien claimant to watch for.

Common questions

Frequently Asked Questions

What does HVAC replacement cost in Texas?

They are planning estimates, not contractor bids.

Does pay for HVAC technicians vary across Texas?

Not much. Across the 12 Texas cities we cover, pay for HVAC technicians stays within a few points, from 4% below the national median in San Antonio to about the same as in Austin (BLS, May 2025).

Do HVAC contractors need a license in Texas?

Yes. In Texas: state air conditioning and refrigeration license (TDLR). Look the contractor up with the Texas Department of Licensing and Regulation before you sign.

Should I get a heat pump instead of AC in Texas?

It's worth pricing.

Which refrigerant should a new AC use?

Newer systems use R-454B or R-32 because EPA rules phased out R-410A in new home AC units from 2025. Ask which one each quote uses.

Ready for your own number?

We have already loaded Texas prices for this HVAC replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

Installed: Central AC + gas furnace (split system)

$8,220-$13,950NumeralQ planning estimate
Get my estimate