Fence Installation Cost in Tacoma, WA: 2026 Local Guide

Typical Tacoma job · 150 linear ft
$3,130-$5,2204% above U.S.

Plan on $3,130-$5,220 for 150 linear ft of new fence in Tacoma, 4% over the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$870-$1,590
Most common
Wood privacy, 6 ft pressure-treated
$3,130-$5,220
Premium
Composite privacy, 6 ft
$6,500-$10,120
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Size moves the price more than anything else. In Tacoma, going from 25 linear ft to 400 linear ft takes the job from $700-$1,130 to $7,980-$13,420, so have the size measured before comparing quotes.

SizeCost
25 linear ft$700-$1,130
50 linear ft$1,180-$1,950
100 linear ft$2,150-$3,590
150 linear ftMost common$3,130-$5,220
200 linear ft$4,100-$6,860
300 linear ft$6,040-$10,140
400 linear ft$7,980-$13,420

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in Tacoma, and farm wire or electric trims about 71%.

TypeTypical jobInstalled
Farm wire or electric$870-$1,590$4.41-$8.57 installed
Split rail (2-3 rail)$1,610-$2,360$9.31-$13.68 installed
Chain link, 4 ft galvanized$2,630-$3,850$16.12-$23.62 installed
Wood privacy, 6 ft pressure-treatedMost common$3,130-$5,220$19.43-$32.78 installed
Wood picket, 4 ft$3,450-$4,870$21.57-$30.41 installed
Cedar privacy, 6 ft$3,820-$5,840$24.06-$36.86 installed
Vinyl privacy, 6 ft$3,990-$6,410$25.19-$40.66 installed
Steel ornamental, 4-5 ft$4,520-$6,850$28.71-$43.60 installed
Aluminum ornamental, 4-5 ft$4,650-$6,750$29.58-$42.92 installed
Composite privacy, 6 ft$6,500-$10,120$41.95-$65.40 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Tacoma fence cost?

We have already loaded Tacoma prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Not every fence installation job needs these, but ask about each one before you sign. In Tacoma, the biggest line is "Drive gate (double)" at $1,440-$3,250 each.

  • Walk gate$361-$675 / each
  • Drive gate (double)$1,440-$3,250 / each
  • Remove old fence$4.52-$5.88 / linear ft
  • Sloped or rocky ground (extra per ft)$2.94-$4.79 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Tacoma different for this job

Tacoma homes and the local housing stock

A fence against the value of a Tacoma home

In Tacoma, a city of mostly houses (64% of units), a fence is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

At the midpoint of the range, the new fence equals roughly 0.9% of Tacoma's $479,600 median home value. 38 markets come out lower, so the price is small next to what homes here are worth.

Local planning note for Tacoma

How Tacoma compares with nearby cities

Of the three, Tacoma is where a new fence takes the biggest bite of a home's value: 0.9% of the median home, against 0.4% in Seattle and 0.3% in Bellevue. That's mostly lower home values, not higher prices.

BLS counts Tacoma, Seattle and Bellevue as one labor market for fence installers, so a cheaper new fence quote from the next city over reflects the contractor, not local pay.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Tacoma$4,1750.9%+16%
Seattle$4,1750.4%+16%
Bellevue$4,1750.3%+16%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Tacoma Fence Installation Pricing — 2026 Local Market

Fence installation cost in Tacoma, WA: $3,130-$5,220 (typical job: 150 linear ft).

Before you fence in Tacoma

NOAA's climate normals count about 21 freezing nights a year in Tacoma, against 90 at the median Washington station and 124 at the median U.S. station.

In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Tacoma at a glance
Nights at or below 32°F21
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Washington)L&I contractor registration with bond and insurance
Where to check a licenseWashington Department of Labor & Industries

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Tacoma

Fence rules in Tacoma

RuleValue
Back and side yard7 ft without permit
Permit neededbuilding permit for fences over 7 ft or masonry walls over 4 ft
Setbackno fences over 3 ft in clear sight triangles; must be on private property

Permits in Tacoma

Tacoma exempts residential fences 7 feet tall or less from building permits, though zoning or site-development rules can still apply.

Fence rules in Tacoma

In Tacoma, chain link fencing, with or without slats, is not allowed between the front of a building and a public street, and fences must sit at least 2 feet behind the back of the sidewalk. Fences over 3 feet are not allowed in clear sight triangles. Fences up to 7 feet need no building permit; taller fences, and masonry walls over 4 feet, need one.

Based on a 2020 city tip sheet; confirm current rules with Tacoma before building.

City of Tacoma Tip Sheet G-325: Fences · Checked October 10, 2026

Design review in Tacoma historic districts

Within a Tacoma local historic district or on a City Landmark, exterior work visible from public rights-of-way generally requires design review by the Landmarks Preservation Commission, and permits are obtained after approval. In the North Slope Historic District, exterior changes that need building permits also require design review.

Applies only to properties on the Tacoma Register; how painting and fences are treated depends on each district's guidelines.

City of Tacoma: Historic Preservation Design Review · Checked October 10, 2026

Nearby pricing

How Tacoma compares with nearby cities

Labor

Labor rates

For fence installation in Tacoma, contractors bill about $53-$69 per worker-hour for fence erectors, whose median pay is $26.65 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$26.65/hrMedian pay
$53-$69/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Tacoma

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Tacoma, WA?

Fence installation cost in Tacoma, WA: $3,130-$5,220 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Seattle-Tacoma-Bellevue area compare with the national median?

Median pay for construction laborers in the Seattle-Tacoma-Bellevue, WA metro area is 16% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Pierce County?

NOAA logged 0 thunderstorm wind reports of 58 mph or more in Pierce County from 2016 to 2025.

How much snow does Tacoma get in a typical year?

About 5.6 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Tacoma prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • Tacoma Permits - Fences tip sheet, checked 2026-10-26 (https://www.tacomapermits.org/tip-sheet-index/fences)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

NumeralQ planning estimate. How we estimate

$3,130-$5,220NumeralQ planning estimate
Get my estimate