Fence Installation Cost in Seattle, WA: 2026 Local Guide

Typical Seattle job · 150 linear ft
$3,130-$5,2204% above U.S.

Most Seattle homeowners pay $3,130-$5,220 for 150 linear ft of new fence, 4% over the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$870-$1,590
Most common
Wood privacy, 6 ft pressure-treated
$3,130-$5,220
Premium
Composite privacy, 6 ft
$6,500-$10,120
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In Seattle the range runs from $700-$1,130 for 25 linear ft to $7,980-$13,420 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$700-$1,130
50 linear ft$1,180-$1,950
100 linear ft$2,150-$3,590
150 linear ftMost common$3,130-$5,220
200 linear ft$4,100-$6,860
300 linear ft$6,040-$10,140
400 linear ft$7,980-$13,420

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in Seattle, and farm wire or electric trims about 71%.

TypeTypical jobInstalled
Farm wire or electric$870-$1,590$4.41-$8.57 installed
Split rail (2-3 rail)$1,610-$2,360$9.31-$13.68 installed
Chain link, 4 ft galvanized$2,630-$3,850$16.12-$23.62 installed
Wood privacy, 6 ft pressure-treatedMost common$3,130-$5,220$19.43-$32.78 installed
Wood picket, 4 ft$3,450-$4,870$21.57-$30.41 installed
Cedar privacy, 6 ft$3,820-$5,840$24.06-$36.86 installed
Vinyl privacy, 6 ft$3,990-$6,410$25.19-$40.66 installed
Steel ornamental, 4-5 ft$4,520-$6,850$28.71-$43.60 installed
Aluminum ornamental, 4-5 ft$4,650-$6,750$29.58-$42.92 installed
Composite privacy, 6 ft$6,500-$10,120$41.95-$65.40 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Seattle fence cost?

We have already loaded Seattle prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Seattle is "Drive gate (double)" at $1,440-$3,250 each, so ask whether it is included.

  • Walk gate$361-$675 / each
  • Drive gate (double)$1,440-$3,250 / each
  • Remove old fence$4.52-$5.88 / linear ft
  • Sloped or rocky ground (extra per ft)$2.94-$4.79 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Seattle different for this job

Seattle homes and the local housing stock

Who builds fences in Seattle

With 57% of units in multi-unit buildings, a fence in Seattle often needs association approval, and HOA rules can set materials and colors.

Measured against the $938,600 median home value, a typical new fence in Seattle is about 0.4% of the house, the 6th lowest share of the 147 markets on this site.

Local planning note for Seattle

How Seattle compares with nearby cities

Relative to home values, Seattle falls in the middle, with a new fence at 0.4% of the median home, below Tacoma and above Bellevue.

Seattle, Bellevue and Tacoma share one BLS metro pay figure for fence installers (Seattle-Tacoma-Bellevue, WA), so labor rates alone don't explain a gap between new fence quotes in these cities.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Seattle$4,1750.4%+16%
Bellevue$4,1750.3%+16%
Tacoma$4,1750.9%+16%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Fence permits and height limits in Seattle

In Seattle, a fence 8 feet high or less with no masonry or concrete parts over 6 feet needs no permit, but taller fences or any fence in a flood-prone area need a construction permit. In neighborhood residential and multifamily zones, fences are limited to 6 feet plus 2 feet of features such as arbors, and to 4 feet in a front or street-side setback.

Environmentally critical areas have different restrictions.

Seattle SDCI: Fences · Checked October 8, 2026

Tree removal rules in Seattle

In Seattle, the tree protection code limits removing trees from private property, and removal is generally not allowed when no development is proposed, with exceptions such as hazardous or dead trees. Anyone hired to remove or assess a tree 6 inches or more in diameter must be on the city's Tree Service Provider Registry and post public notice at least six full business days before removal.

Tier definitions and exemptions are detailed in the city code, which was updated in 2026.

Seattle SDCI: Trees and Codes · Checked October 11, 2026

Local rules and records for Seattle

Fence rules in Seattle

RuleValue
Front yard4 ft in front or street-side setback
Back and side yard6 ft plus 2 ft open features (8 ft avg 6 ft on slopes)
Permit neededno permit for fences 8 ft or lower without masonry/concrete over 6 ft; permit in flood-prone areas

Retaining wall plus fence max 9 ft 6 in

Seattle's climate and fence work

NOAA's climate normals count about 25 freezing nights a year in Seattle, against 90 at the median Washington station and 124 at the median U.S. station.

Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Seattle at a glance
Nights at or below 32°F25
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Washington)L&I contractor registration with bond and insurance
Where to check a licenseWashington Department of Labor & Industries

Local data checked October 2026 · Sources at the bottom of the page

Exterior work in Seattle historic districts

Within Seattle's Harvard-Belmont Landmark District, a Certificate of Approval from the Landmarks Preservation Board is required before any building, demolition or street use permit for work visible from a public right-of-way, including exterior alterations and adding or removing major site features such as retaining walls, trees or driveways. Seattle's other historic districts, including Ballard Avenue and Columbia City, also require Certificates of Approval.

Each district has its own rules and guidelines; individually designated landmarks are handled separately.

Seattle Department of Neighborhoods: Harvard-Belmont Landmark District · Checked October 11, 2026

Nearby pricing

How Seattle compares with nearby cities

Labor

Labor rates

On a fence installation job in Seattle, fence erectors earn a median $26.65 an hour. After insurance, payroll taxes and overhead, contractors bill about $53-$69 per worker-hour.

Fence Erectors

$26.65/hrMedian pay
$53-$69/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Seattle

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Seattle, WA?

Fence installation cost in Seattle, WA: $3,130-$5,220 (typical job: 150 linear ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Seattle-Tacoma-Bellevue area compare with the national median?

Median pay for construction laborers in the Seattle-Tacoma-Bellevue, WA metro area is 16% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit King County?

NOAA logged 0 thunderstorm wind reports of 58 mph or more in King County from 2016 to 2025.

How much snow does Seattle get in a typical year?

About 3.8 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Seattle prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • Seattle SDCI - Fences, checked 2026-10-26 (https://www.seattle.gov/sdci/permits/common-projects/fences)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Seattle (1.24×). How we estimate

$3,130-$5,220NumeralQ planning estimate
Get my estimate