Deck or patio cost by size
Find your size in the table. In Tacoma the range runs from $1,910-$2,640 for 10 x 10 ft to $11,470-$15,830 for 20 x 30 ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,910-$2,640 |
| 12 x 12 ft | $2,750-$3,800 |
| 12 x 16 ft | $3,670-$5,060 |
| 16 x 16 ft | $4,900-$6,750 |
| 16 x 20 ftMost common | $6,120-$8,440 |
| 20 x 20 ft | $7,650-$10,550 |
| 20 x 30 ft | $11,470-$15,830 |
Installed: Deck: pressure-treated wood
Deck or patio cost by material or type
In Tacoma, patio: plain concrete comes in about 50% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.3 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $6,120-$8,440).
| Type | Typical job | Installed |
|---|---|---|
| Patio: plain concrete | $3,130-$4,150 | $9.79-$12.95 installed |
| Patio: gravel | $3,200-$4,440 | $9.99-$13.87 installed |
| Patio: brick pavers | $5,100-$6,970 | $15.93-$21.78 installed |
| Patio: flagstone | $5,190-$12,610 | $16.23-$39.42 installed |
| Patio: stamped concrete | $5,710-$7,570 | $17.83-$23.65 installed |
| Patio: concrete pavers | $5,880-$8,030 | $18.38-$25.10 installed |
| Deck: pressure-treated woodMost common | $6,120-$8,440 | $19.12-$26.38 installed |
| Patio: slate | $7,070-$10,890 | $22.08-$34.02 installed |
Show 9 more options
| Type | Typical job | Installed |
|---|---|---|
| Deck: cedar | $7,220-$10,440 | $22.57-$32.63 installed |
| Patio: porcelain pavers | $7,410-$11,050 | $23.16-$34.53 installed |
| Patio: travertine pavers | $7,430-$9,900 | $23.21-$30.93 installed |
| Patio: bluestone | $8,100-$12,520 | $25.32-$39.12 installed |
| Deck: redwood | $9,870-$13,520 | $30.84-$42.24 installed |
| Deck: aluminum | $10,720-$14,180 | $33.50-$44.30 installed |
| Deck: composite | $11,080-$15,960 | $34.62-$49.88 installed |
| Deck: PVC | $12,070-$15,970 | $37.71-$49.91 installed |
| Deck: ipe hardwood | $13,800-$19,670 | $43.13-$61.48 installed |
Materials include waste and contractor markup. Typical job: 320 sq ft
What will your Tacoma deck or patio cost?
We have already loaded Tacoma prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 8 extras are where quotes most often grow. The largest single line in Tacoma is "Pergola or cover structure" at $5,150-$9,060 for the job, so ask whether it is included.
- Railing: wood$40.06-$54.50 / linear ft
- Railing: aluminum or steel$55.13-$92.80 / linear ft
- Railing: composite$102-$175 / linear ft
- Railing: cable$118-$194 / linear ft
- Railing: glass$143-$241 / linear ft
- Stairs (per step, wood, pre-cut stringers)$129-$214 / step
- Footing (poured concrete)$246-$417 / each
- Pergola or cover structure$5,150-$9,060 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Railing: wood | $12.07-$18.11 / linear ft |
| Railing: aluminum or steel | $30.19-$60.38 / linear ft |
| Railing: composite | $60-$121 / linear ft |
| Railing: cable | $85-$151 / linear ft |
| Railing: glass | $97-$181 / linear ft |
| Stairs (per step, wood, pre-cut stringers) | $33.81-$90.56 / step |
| Footing (poured concrete) | $57-$173 / each |
| Pergola or cover structure | $1,720-$4,600 / job |
Installed price per unit
What makes Tacoma different for this job
Tacoma homes and the local housing stock
Tacoma homes and outdoor projects
64% of Tacoma units are houses with their own lots, and 56% of homes are owner-occupied, so a deck is usually the owner's call, subject to HOA rules where they apply.
Against the $479,600 median home value, a typical deck or patio in Tacoma costs about 1.5% of the house. That ranks 94th of 147 markets, with 1st the most expensive relative to home values.
Local planning note for Tacoma
Tacoma, Seattle and Bellevue side by side
Of the three, Tacoma is where a deck or patio takes the biggest bite of a home's value: 1.5% of the median home, against 0.8% in Seattle and 0.5% in Bellevue. That's mostly lower home values, not higher prices.
Tacoma, Seattle and Bellevue share one BLS metro pay figure for carpenters (Seattle-Tacoma-Bellevue, WA), so labor rates alone don't explain a gap between deck or patio quotes in these cities.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. |
|---|---|---|---|
| Tacoma | $7,280 | 1.5% | +26% |
| Seattle | $7,280 | 0.8% | +26% |
| Bellevue | $7,280 | 0.5% | +26% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Tacoma Deck & Patio Pricing — 2026 Local Market
Deck or patio cost in Tacoma, WA: $6,120-$8,440 (typical job: 320 sq ft).
Building a deck in Tacoma
Tacoma averages 21 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 90 at the median Washington station and 124 at the median U.S. station.
Ask the building department for Tacoma's frost depth. The model code requires deck footings to sit below it, and at least 12 inches down.
Under the model residential code, a deck needs a permit unless it is under 200 square feet, less than 30 inches above grade and not attached to the house. Many cities amend that, so check before you build.
The station also averages 42.0 inches of rain and melted snow a year (U.S. median: 37.5).
| Nights at or below 32°F | 21 |
|---|---|
| Yearly precipitation | 42.0 in |
| Climate zone (county) | 4C |
| Contractor license (Washington) | L&I contractor registration with bond and insurance |
| Where to check a license | Washington Department of Labor & Industries |
Local data checked October 2026 · Sources at the bottom of the page
Design review in Tacoma historic districts
District/overlay only
Within a Tacoma local historic district or on a City Landmark, exterior work visible from public rights-of-way generally requires design review by the Landmarks Preservation Commission, and permits are obtained after approval. In the North Slope Historic District, exterior changes that need building permits also require design review.
Applies only to properties on the Tacoma Register; how painting and fences are treated depends on each district's guidelines.
City of Tacoma: Historic Preservation Design Review · Checked October 10, 2026
How Tacoma compares with nearby cities
Labor rates
On a deck or patio job in Tacoma, carpenters earn a median $36.74 an hour. After insurance, payroll taxes and overhead, contractors bill about $73-$96 per worker-hour.
Carpenters
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Tacoma
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Frequently Asked Questions
How much does Deck & Patio cost in Tacoma, WA?
Deck or patio cost in Tacoma, WA: $6,120-$8,440 (typical job: 320 sq ft). The table near the top of the page prices each option separately.
How does pay for carpenters in the Seattle-Tacoma-Bellevue area compare with the national median?
Median pay for carpenters in the Seattle-Tacoma-Bellevue, WA metro area is 26% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Pierce County?
NOAA logged 0 thunderstorm wind reports of 58 mph or more in Pierce County from 2016 to 2025.
How much snow does Tacoma get in a typical year?
About 5.6 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Tacoma prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- DOE climate zone guide source
- Washington Department of Labor & Industries source
- NOAA Storm Events Database source
This estimate is NumeralQ's national baseline with a Tacoma adjustment of 1.24×. How we estimate