Fence Installation Cost in Richmond, VA: 2026 Local Guide

Typical Richmond job · 150 linear ft
$2,870-$4,8904% below U.S.

Plan on $2,870-$4,890 for 150 linear ft of new fence in Richmond, about 4% less than the same job nationally.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$670-$1,330
Most common
Wood privacy, 6 ft pressure-treated
$2,870-$4,890
Premium
Composite privacy, 6 ft
$6,220-$9,750
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

The biggest driver is size: 25 linear ft costs $620-$1,020 in Richmond, while 400 linear ft costs $7,370-$12,620, about 1119% more. Ask every contractor to quote the same measured size.

SizeCost
25 linear ft$620-$1,020
50 linear ft$1,070-$1,800
100 linear ft$1,970-$3,340
150 linear ftMost common$2,870-$4,890
200 linear ft$3,770-$6,430
300 linear ft$5,570-$9,530
400 linear ft$7,370-$12,620

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

Material choice is the second big lever in Richmond. Farm wire or electric runs $670-$1,330, about 74% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,220-$9,750.

TypeTypical jobInstalled
Farm wire or electric$670-$1,330$3.36-$7.20 installed
Split rail (2-3 rail)$1,380-$2,060$8.07-$12.06 installed
Chain link, 4 ft galvanized$2,210-$3,310$13.66-$20.42 installed
Wood picket, 4 ft$2,870-$4,110$18.00-$25.76 installed
Wood privacy, 6 ft pressure-treatedMost common$2,870-$4,890$18.01-$30.92 installed
Cedar privacy, 6 ft$3,550-$5,490$22.55-$34.91 installed
Vinyl privacy, 6 ft$3,730-$6,060$23.73-$38.76 installed
Steel ornamental, 4-5 ft$4,080-$6,280$26.11-$40.22 installed
Aluminum ornamental, 4-5 ft$4,430-$6,460$28.41-$41.40 installed
Composite privacy, 6 ft$6,220-$9,750$40.36-$63.34 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Richmond fence cost?

We have already loaded Richmond prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Richmond is "Drive gate (double)" at $1,200-$2,930 each, so ask whether it is included.

  • Walk gate$290-$583 / each
  • Drive gate (double)$1,200-$2,930 / each
  • Remove old fence$3.27-$4.25 / linear ft
  • Sloped or rocky ground (extra per ft)$2.28-$3.94 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Richmond different for this job

Richmond homes and the local housing stock

Richmond lots and fences

52% of Richmond units are houses with their own lots, and 44% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

The midpoint of the range above is about 1.1% of Richmond's $353,000 median home value, the 67th lowest share for a new fence among 147 markets and near the middle of the pack.

Local planning note for Richmond

Richmond next to Norfolk and Chesapeake

Richmond sits between its neighbors: a typical new fence is 1.1% of the median home value here, 1.3% in Norfolk and 1.0% in Chesapeake.

If you're comparing new fence bids from Norfolk or Chesapeake with bids from Richmond, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
Richmond$3,8801.1%-16% (state figure)
Norfolk$3,8801.3%-16% (state figure)
Chesapeake$3,8801.0%-16% (state figure)

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Fences in Richmond historic districts

Within a Richmond City Old and Historic District, new fences must be painted or stained after weathering, and vinyl, chain link and exposed concrete block are not considered appropriate. Simple designs such as flat, dog-eared or picket fences can be approved by staff, while walls and fences with masonry piers or more decorative designs need Commission of Architectural Review approval. Fences must also meet zoning height limits.

Applies only inside a City Old and Historic District; exact zoning heights vary by zoning district.

Richmond Commission of Architectural Review: Homeowner's Manual for City Old and Historic Districts · Checked October 9, 2026

Fence posts and rules in Richmond

Richmond averages 74 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 101 across Virginia weather stations and 124 across U.S. stations.

In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.

Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Richmond at a glance
Nights at or below 32°F74
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Virginia)Board for Contractors license for jobs over $1,000
Where to check a licenseVirginia DPOR Board for Contractors

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Richmond

Fence rules in Richmond

RuleValue
Front yard4 ft in R-6, R-7, R-63 front yards; 6.5 ft elsewhere
Back and side yard6.5 ft (plus 1.5 ft for posts/gates)
Permit neededno building permit for fences except pool barriers

Historic districts may need approval; zoning rewrite in draft

Certificates of appropriateness in Richmond historic districts

Within a Richmond Old and Historic District, no exterior part of a building or structure, and no paving, may be built, altered, repaired or restored unless the Commission of Architectural Review approves it with a certificate of appropriateness. The city will not issue a building permit for that work until the certificate is approved, and a certificate is required for all alterations subject to public view.

Applies only inside a designated Old and Historic District; the city's zoning rewrite may renumber or amend this section.

Richmond City Code Sec. 30-930.6 (Certificate of appropriateness) · Checked October 9, 2026

Nearby pricing

How Richmond compares with nearby cities

Labor

Labor rates

For fence installation in Richmond, contractors bill about $39-$50 per worker-hour for fence erectors, whose median pay is $19.26 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$19.26/hrMedian pay
$39-$50/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Richmond

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Richmond, VA?

Fence installation cost in Richmond, VA: $2,870-$4,890 (typical job: 150 linear ft). The table above breaks it out by option.

How does pay for construction laborers in the Richmond area compare with the national median?

Median pay for construction laborers in the Richmond, VA metro area is 10% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Richmond city?

NOAA logged 30 thunderstorm wind reports of 58 mph or more in Richmond city from 2016 to 2025.

How much snow does Richmond get in a typical year?

About 8.8 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Richmond prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • Richmond Planning & Development Review FAQ, checked 2026-10-26 (https://www.rva.gov/planning-development-review/faq)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

NumeralQ planning estimate. How we estimate

$2,870-$4,890NumeralQ planning estimate
Get my estimate