Deck & Patio Cost in Richmond, VA: 2026 Local Guide

Typical Richmond job · 320 sq ft
$4,930-$6,9008% below U.S.

In Richmond, a 320 sq ft deck or patio usually costs $4,930-$6,900, 8% under the U.S. figure.

The median home in Richmond was built in 1959, and older yards may need an old deck torn out and footings redone.

For comparable written proposals, confirm dimensions and elevation, footing and attachment details, decking and guard scope, and grading or drainage work.

Your options

Budget
Patio: plain concrete
$2,180-$2,910
Most common
Deck: pressure-treated wood
$4,930-$6,900
Premium
Deck: ipe hardwood
$11,490-$16,660
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

The biggest driver is size: 10 x 10 ft costs $1,540-$2,160 in Richmond, while 20 x 30 ft costs $9,250-$12,940, about 500% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 10 ft$1,540-$2,160
12 x 12 ft$2,220-$3,110
12 x 16 ft$2,960-$4,140
16 x 16 ft$3,950-$5,520
16 x 20 ftMost common$4,930-$6,900
20 x 20 ft$6,170-$8,630
20 x 30 ft$9,250-$12,940

Installed: Deck: pressure-treated wood

Cost by material

Deck or patio cost by material or type

The gap between options is wide: deck: ipe hardwood costs about 2.4 times as much as deck: pressure-treated wood in Richmond, and patio: plain concrete trims about 57%.

TypeTypical jobInstalled
Patio: plain concrete$2,180-$2,910$6.83-$9.10 installed
Patio: gravel$2,550-$3,590$7.96-$11.23 installed
Patio: stamped concrete$3,810-$5,100$11.91-$15.95 installed
Patio: brick pavers$3,850-$5,350$12.02-$16.71 installed
Patio: concrete pavers$4,120-$5,730$12.86-$17.92 installed
Patio: flagstone$4,590-$11,830$14.34-$36.96 installed
Deck: pressure-treated woodMost common$4,930-$6,900$15.42-$21.56 installed
Patio: slate$5,050-$8,260$15.77-$25.82 installed
Show 9 more options
TypeTypical jobInstalled
Patio: porcelain pavers$5,070-$8,000$15.83-$25.01 installed
Patio: travertine pavers$5,600-$7,530$17.51-$23.52 installed
Patio: bluestone$5,810-$9,540$18.16-$29.80 installed
Deck: cedar$5,940-$8,780$18.57-$27.43 installed
Deck: redwood$8,130-$11,250$25.40-$35.17 installed
Deck: composite$8,890-$13,110$27.77-$40.97 installed
Deck: aluminum$9,580-$12,690$29.92-$39.64 installed
Deck: PVC$9,620-$12,790$30.07-$39.97 installed
Deck: ipe hardwood$11,490-$16,660$35.90-$52.07 installed

Materials include waste and contractor markup. Typical job: 320 sq ft

What will your Richmond deck or patio cost?

We have already loaded Richmond prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 8 extras are where quotes most often grow. The largest single line in Richmond is "Pergola or cover structure" at $4,050-$7,630 for the job, so ask whether it is included.

  • Railing: wood$31.07-$42.81 / linear ft
  • Railing: aluminum or steel$47.12-$82.39 / linear ft
  • Railing: composite$89-$158 / linear ft
  • Railing: cable$107-$180 / linear ft
  • Railing: glass$128-$222 / linear ft
  • Stairs (per step, wood, pre-cut stringers)$98-$175 / step
  • Footing (poured concrete)$185-$339 / each
  • Pergola or cover structure$4,050-$7,630 / job
Show material-only prices
Add-onMaterials
Railing: wood$12.07-$18.11 / linear ft
Railing: aluminum or steel$30.19-$60.38 / linear ft
Railing: composite$60-$121 / linear ft
Railing: cable$85-$151 / linear ft
Railing: glass$97-$181 / linear ft
Stairs (per step, wood, pre-cut stringers)$33.81-$90.56 / step
Footing (poured concrete)$57-$173 / each
Pergola or cover structure$1,720-$4,600 / job

Installed price per unit

Local conditions

What makes Richmond different for this job

Richmond homes and the local housing stock

Richmond yards and who owns them

In Richmond, a city of mostly houses (52% of units), a deck is typically hired by the owner. Ask whether an HOA covers your lot before choosing materials.

The midpoint of the range above is about 1.7% of Richmond's $353,000 median home value, the 67th lowest share for a deck or patio among 147 markets and near the middle of the pack.

Local planning note for Richmond

How Richmond compares with nearby cities

Relative to home values, Richmond falls in the middle, with a deck or patio at 1.7% of the median home, below Norfolk and above Chesapeake.

Getting deck or patio bids from outside Richmond? The Norfolk and Chesapeake pages below show the full price ranges there.

CityTypical job (midpoint)Share of median home valuePay for carpenters vs U.S.Permit for a $15,000 remodel
Richmond$5,9151.7%-14%$142
Norfolk$5,9002.0%-15%Not published
Chesapeake$5,9001.6%-15%Not published

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Building a deck in Richmond

NOAA's climate normals count about 74 freezing nights a year in Richmond, against 101 at the median Virginia station and 124 at the median U.S. station.

The residential code puts deck footings at least 12 inches into undisturbed soil and below the local frost line; the building department sets that depth for Richmond.

Under the model residential code, a deck needs a permit unless it is under 200 square feet, less than 30 inches above grade and not attached to the house. Many cities amend that, so check before you build.

Yearly precipitation runs about 45.5 inches here, against 37.5 at the median U.S. station.

Decks in Richmond at a glance
Nights at or below 32°F74
Yearly precipitation45.5 in
Climate zone (county)4A
Contractor license (Virginia)Board for Contractors license for jobs over $1,000
Where to check a licenseVirginia DPOR Board for Contractors

Local data checked October 2026 · Sources at the bottom of the page

Certificates of appropriateness in Richmond historic districts

Within a Richmond Old and Historic District, no exterior part of a building or structure, and no paving, may be built, altered, repaired or restored unless the Commission of Architectural Review approves it with a certificate of appropriateness. The city will not issue a building permit for that work until the certificate is approved, and a certificate is required for all alterations subject to public view.

Applies only inside a designated Old and Historic District; the city's zoning rewrite may renumber or amend this section.

Richmond City Code Sec. 30-930.6 (Certificate of appropriateness) · Checked October 9, 2026

Chesapeake Bay buffers in Richmond

Within a Richmond Chesapeake Bay Resource Protection Area, which includes a buffer at least 100 feet wide along tidal shores, wetlands and both sides of perennial streams, land development is allowed only in listed cases, and any proposed land disturbance needs a water quality impact assessment. Redevelopment outside intensely developed areas may not add impervious cover or encroach further into the protection area. Land disturbance over 2,500 square feet goes through plan-of-development review.

Applies only to properties shown on the city's Chesapeake Bay Preservation Areas Map.

Richmond City Code Ch. 14, Art. IV (Chesapeake Bay Preservation Areas) · Checked October 11, 2026

Nearby pricing

How Richmond compares with nearby cities

Labor

Labor rates

On a deck or patio job in Richmond, carpenters earn a median $24.94 an hour. After insurance, payroll taxes and overhead, contractors bill about $50-$65 per worker-hour.

Carpenters

$24.94/hrMedian pay
$50-$65/hrBilled rate

Cement Masons and Concrete Finishers

$21.96/hrMedian pay
$44-$57/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Richmond

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration
Common questions

Frequently Asked Questions

How much does Deck & Patio cost in Richmond, VA?

Deck or patio cost in Richmond, VA: $4,930-$6,900 (typical job: 320 sq ft). Each option in the price table above has its own range.

How does pay for carpenters in the Richmond area compare with the national median?

Median pay for carpenters in the Richmond, VA metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Richmond city?

NOAA logged 30 thunderstorm wind reports of 58 mph or more in Richmond city from 2016 to 2025.

How much snow does Richmond get in a typical year?

About 8.8 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.

Ready for your own number?

We have already loaded Richmond prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • https://rva.gov/sites/default/files/2024-08/PermitsFeeSchedule.pdf
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Richmond (1.03×). How we estimate

$4,930-$6,900NumeralQ planning estimate
Get my estimate