Insulation Cost in Fort Worth, TX: 2026 Local Guide

Typical Fort Worth job · 1,000 sq ft
$1,230-$2,050About the U.S. price

Most Fort Worth homeowners pay $1,230-$2,050 for insulating 1,000 sq ft, close to the national typical job.

For comparable written proposals, confirm the building assembly and target R-value, air-sealing scope, moisture control, ventilation, and access.

Your options

Budget
Radiant barrier (attic)
$880-$1,540
Most common
Blown-in fiberglass, attic (R-38)
$1,230-$2,050
Premium
Spray foam, closed-cell (2 in.)
$3,720-$5,280
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Insulation cost by size

Find your size in the table. In Fort Worth the range runs from $680-$1,130 for 500 sq ft to $2,900-$4,820 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.

SizeCost
500 sq ft$680-$1,130
1,000 sq ftMost common$1,230-$2,050
1,500 sq ft$1,790-$2,970
2,000 sq ft$2,340-$3,900
2,500 sq ft$2,900-$4,820

Installed: Blown-in fiberglass, attic (R-38)

Cost by material

Insulation cost by material or type

In Fort Worth, radiant barrier (attic) comes in about 26% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,230-$2,050).

TypeTypical jobInstalled
Radiant barrier (attic)$880-$1,540$0.75-$1.34 installed
Blown-in fiberglass, attic (R-38)Most common$1,230-$2,050$1.11-$1.85 installed
Blown-in cellulose, attic (R-38)Most common$1,230-$2,050$1.11-$1.85 installed
Fiberglass batts, walls (R-13)$1,420-$1,820$1.29-$1.62 installed
Rigid foam board (R-5 per inch, 2 in.)$1,700-$4,130$1.57-$3.93 installed
Fiberglass batts, attic floor (R-30)$2,050-$2,400$1.92-$2.19 installed
Spray foam, open-cell (3.5 in.)$2,160-$3,210$2.03-$3.00 installed
Dense-pack cellulose, existing walls$2,470-$3,410$2.34-$3.20 installed
Mineral wool batts (R-15)$2,570-$3,580$2.44-$3.37 installed
Spray foam, closed-cell (2 in.)$3,720-$5,280$3.60-$5.07 installed

Materials include waste and contractor markup. Typical job: 1,000 sq ft

What will your Fort Worth insulation project cost?

We have already loaded Fort Worth prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 2 items your quote includes. The costliest line in Fort Worth is "Air sealing (attic)" at $669-$1,010 for the job.

  • Remove old insulation$1.30-$1.76 / sq ft
  • Air sealing (attic)$669-$1,010 / job
Show material-only prices
Add-onMaterials
Remove old insulation$0.06-$0.14 / sq ft
Air sealing (attic)$115-$288 / job

Installed price per unit

Local conditions

What makes Fort Worth different for this job

Fort Worth homes and the local housing stock

Insulation and the age of Fort Worth's housing

By room count, the median Fort Worth home is about average: 5.3 rooms against 5.5 for the other Texas cities NumeralQ covers, which sets the scope of most insulation jobs. For insulation jobs, Fort Worth housing is middle-aged by the standards of the other Texas cities NumeralQ covers: half the homes were built by 1994, against 1994 there.

Most Fort Worth homes were built in 1994 or later, under an energy code, so attics usually have some insulation already. The job is often a top-up rather than a full install.

A typical insulation job at the midpoint price equals roughly 0.5% of what the median Fort Worth home is worth ($303,000), 61st of the 147 markets NumeralQ covers.

Local planning note for Fort Worth

Fort Worth, Arlington and Dallas side by side

Against home values, an insulation job weighs about the same in Fort Worth, Arlington and Dallas: 0.5% of the median home here, 0.5% and 0.5% next door.

Fort Worth, Arlington and Dallas share one BLS metro pay figure for insulation workers (Dallas-Fort Worth-Arlington, TX), so labor rates alone don't explain a gap between insulation job quotes in these cities.

CityTypical job (midpoint)Share of median home valuePay for insulation workers vs U.S.
Fort Worth$1,6400.5%+2%
Arlington$1,6400.5%+2%
Dallas$1,6400.5%+2%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

Fort Worth Insulation Pricing — 2026 Local Market

Insulation cost in Fort Worth, TX: $1,230-$2,050 (typical job: 1,000 sq ft).

Insulation targets for Fort Worth

ENERGY STAR's attic recommendation for climate zone 2A, which covers Tarrant County, is R49 to R60.

A typical year in Fort Worth brings 2,026 heating degree days and 2,963 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.

For comparison, the median station in Texas records 2,230 heating and 2,585 cooling degree days, and the U.S. median is 5,483 and 848.

New construction in Texas follows the 2015 IRC energy chapter; retrofit jobs are often not inspected, so get the installed R-value in writing.

Insulation in Fort Worth at a glance
Climate zone (county)2A
ENERGY STAR attic levelR49 to R60
Heating / cooling degree days2,026 / 2,963
Federal 25C insulation creditEnded for work placed in service after 2025
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Local planning note for Fort Worth

Fort Worth homes and Oncor incentives

Oncor is the wires utility for most of Fort Worth, whoever your retail provider is. Its efficiency incentive is paid to participating contractors, who pass the savings to you, so ask about it before you pick a bidder. The money usually runs from February until it's spent, and we're working from a 2022 Oncor article, so confirm this year's terms. More attic insulation is a listed item, so ask early in the year.

Nearby pricing

How Fort Worth compares with nearby cities

Labor

Labor rates

On an insulation job in Fort Worth, insulation workers earn a median $24.00 an hour, 2% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $48-$62 per worker-hour.

Insulation Workers, Floor, Ceiling, and Wall

$24.00/hrMedian pay
$48-$62/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Fort Worth

Get every quote to include

  • assembly, insulation material, coverage area, and target R-value
  • air sealing, preparation, and removal of existing material
  • moisture or vapor-control details and ventilation scope
  • access constraints, cleanup, and any excluded repairs

Contractors per home in Fort Worth

Insulation installers per home in Tarrant County

For insulating an attic or walls in Fort Worth, the local pool is 97 drywall and insulation contractors in Tarrant County (Census, 2023): 1.1 per 10,000 homes, 15% below the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.

That's a normal level of competition for Fort Worth, so an insulation job quote far above the others is worth questioning. The same county count applies to Arlington.

Common questions

Frequently Asked Questions

How much does Insulation cost in Fort Worth, TX?

Insulation cost in Fort Worth, TX: $1,230-$2,050 (typical job: 1,000 sq ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?

Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 2% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How old are homes in Fort Worth?

About 34% were built before 1980, according to the Census Bureau, against 33% across Texas and 50% nationally.

How do most Fort Worth homes heat?

About 30% heat mainly with piped gas and 68% with electricity, according to the Census Bureau's 2020–2024 survey.

Ready for your own number?

We have already loaded Fort Worth prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • Ready to get energy efficient? We show you how (Oncor), checked October 11, 2026 (https://www.oncor.com/content/oncorwww/wire/en/home/energy-efficiency/ready-to-get-energy-efficient--we-show-you-how.html)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)

We start from a national baseline and adjust it for Fort Worth (0.96×). How we estimate

$1,230-$2,050NumeralQ planning estimate
Get my estimate