Insulation cost by size
Find your size in the table. In Dallas the range runs from $680-$1,130 for 500 sq ft to $2,900-$4,820 for 2,500 sq ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 500 sq ft | $680-$1,130 |
| 1,000 sq ftMost common | $1,230-$2,050 |
| 1,500 sq ft | $1,790-$2,970 |
| 2,000 sq ft | $2,340-$3,900 |
| 2,500 sq ft | $2,900-$4,820 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
In Dallas, radiant barrier (attic) comes in about 26% under blown-in fiberglass, attic (R-38), and spray foam, closed-cell (2 in.) runs roughly 2.7 times the price, so get each option you are weighing priced on the same quote (blown-in fiberglass, attic (R-38) here: $1,230-$2,050).
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $880-$1,540 | $0.75-$1.34 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,230-$2,050 | $1.11-$1.85 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,230-$2,050 | $1.11-$1.85 installed |
| Fiberglass batts, walls (R-13) | $1,420-$1,820 | $1.29-$1.62 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,700-$4,130 | $1.57-$3.93 installed |
| Fiberglass batts, attic floor (R-30) | $2,050-$2,400 | $1.92-$2.19 installed |
| Spray foam, open-cell (3.5 in.) | $2,160-$3,210 | $2.03-$3.00 installed |
| Dense-pack cellulose, existing walls | $2,470-$3,410 | $2.34-$3.20 installed |
| Mineral wool batts (R-15) | $2,570-$3,580 | $2.44-$3.37 installed |
| Spray foam, closed-cell (2 in.) | $3,720-$5,280 | $3.60-$5.07 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your Dallas insulation project cost?
We have already loaded Dallas prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 2 items your quote includes. The costliest line in Dallas is "Air sealing (attic)" at $669-$1,010 for the job.
- Remove old insulation$1.30-$1.76 / sq ft
- Air sealing (attic)$669-$1,010 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes Dallas different for this job
Dallas homes and the local housing stock
Dallas homes and insulation
Room count drives the size of insulation jobs, and the median Dallas home has 4.6 (bathrooms excluded) compared with 5.5 for the rest of Texas's covered cities. Census figures put the median construction year at 1981 in Dallas and 1994 for the rest of Texas's covered cities, and house age shapes most insulation jobs here.
Because the median home dates to 1981, a Dallas attic usually has code-era insulation in it. Ask the installer to measure it, since topping up costs less than starting from bare joists.
A typical insulation job at the midpoint price equals roughly 0.5% of what the median Dallas home is worth ($320,700), 69th of the 147 markets NumeralQ covers.
Local planning note for Dallas
Dallas next to Plano and Arlington
Against home values, an insulation job weighs about the same in Dallas, Plano and Arlington: 0.5% of the median home here, 0.4% and 0.5% next door.
BLS counts Dallas, Plano and Arlington as one labor market for insulation workers, so a cheaper insulation job quote from the next city over reflects the contractor, not local pay.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| Dallas | $1,640 | 0.5% | +2% |
| Plano | $1,640 | 0.4% | +2% |
| Arlington | $1,640 | 0.5% | +2% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Insulation targets for Dallas
Dallas County is in climate zone 2A, according to the DOE climate zone guide, where ENERGY STAR recommends R49 to R60 in the attic.
A typical year in Dallas brings 1,992 heating degree days and 3,125 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.
The median Texas weather station logs 2,230 and 2,585; the median U.S. station, 5,483 and 848.
New construction in Texas follows the 2015 IRC energy chapter; retrofit jobs are often not inspected, so get the installed R-value in writing.
| Climate zone (county) | 2A |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 1,992 / 3,125 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (Texas) | No state general or remodeling license; some cities register contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
Local planning note for Dallas
Oncor's incentive goes through your Dallas contractor
In Dallas, Oncor pays its Home Energy Efficiency incentive to an approved service provider, not to you, and the provider takes it off your price. Funding runs roughly February to November each year until it's gone. Our source is a 2022 Oncor article, so check current terms. Added attic insulation is one of the main items, so ask insulation bidders if they're in the program.
How Dallas compares with nearby cities
Labor rates
For insulation in Dallas, contractors bill about $48-$62 per worker-hour for insulation workers, whose median pay is $24.00 an hour, 2% above the U.S. median. The difference covers insurance, taxes, overhead and profit.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Dallas
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in Dallas
How many insulation installers work in Dallas's area
For insulating an attic or walls in Dallas, the local pool is 140 drywall and insulation contractors in Dallas County (Census, 2023): 1.3 per 10,000 homes, about the U.S. rate of 1.4. The Census counts drywall and insulation firms together, so not every one of them does insulation.
That's a normal level of competition for Dallas, so an insulation job quote far above the others is worth questioning.
Frequently Asked Questions
How much does Insulation cost in Dallas, TX?
Insulation cost in Dallas, TX: $1,230-$2,050 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?
Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 2% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in Dallas?
About 48% were built before 1980, according to the Census Bureau, against 33% across Texas and 50% nationally.
How do most Dallas homes heat?
About 33% heat mainly with piped gas and 65% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded Dallas prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Ready to get energy efficient? We show you how (Oncor), checked October 11, 2026 (https://www.oncor.com/content/oncorwww/wire/en/home/energy-efficiency/ready-to-get-energy-efficient--we-show-you-how.html)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- ENERGY STAR source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
We start from a national baseline and adjust it for Dallas (0.97×). How we estimate