Insulation cost by size
Size moves the price more than anything else. In Frisco, going from 500 sq ft to 2,500 sq ft takes the job from $680-$1,130 to $2,900-$4,820, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 500 sq ft | $680-$1,130 |
| 1,000 sq ftMost common | $1,230-$2,050 |
| 1,500 sq ft | $1,790-$2,970 |
| 2,000 sq ft | $2,340-$3,900 |
| 2,500 sq ft | $2,900-$4,820 |
Installed: Blown-in fiberglass, attic (R-38)
Insulation cost by material or type
The gap between options is wide: spray foam, closed-cell (2 in.) costs about 2.7 times as much as blown-in fiberglass, attic (R-38) in Frisco, and radiant barrier (attic) trims about 26%.
| Type | Typical job | Installed |
|---|---|---|
| Radiant barrier (attic) | $880-$1,540 | $0.75-$1.34 installed |
| Blown-in fiberglass, attic (R-38)Most common | $1,230-$2,050 | $1.11-$1.85 installed |
| Blown-in cellulose, attic (R-38)Most common | $1,230-$2,050 | $1.11-$1.85 installed |
| Fiberglass batts, walls (R-13) | $1,420-$1,820 | $1.29-$1.62 installed |
| Rigid foam board (R-5 per inch, 2 in.) | $1,700-$4,130 | $1.57-$3.93 installed |
| Fiberglass batts, attic floor (R-30) | $2,050-$2,400 | $1.92-$2.19 installed |
| Spray foam, open-cell (3.5 in.) | $2,160-$3,210 | $2.03-$3.00 installed |
| Dense-pack cellulose, existing walls | $2,470-$3,410 | $2.34-$3.20 installed |
| Mineral wool batts (R-15) | $2,570-$3,580 | $2.44-$3.37 installed |
| Spray foam, closed-cell (2 in.) | $3,720-$5,280 | $3.60-$5.07 installed |
Materials include waste and contractor markup. Typical job: 1,000 sq ft
What will your Frisco insulation project cost?
We have already loaded Frisco prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every insulation job needs these, but ask about each one before you sign. In Frisco, the biggest line is "Air sealing (attic)" at $669-$1,010 for the job.
- Remove old insulation$1.30-$1.76 / sq ft
- Air sealing (attic)$669-$1,010 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old insulation | $0.06-$0.14 / sq ft |
| Air sealing (attic) | $115-$288 / job |
Installed price per unit
What makes Frisco different for this job
Frisco homes and the local housing stock
Frisco homes and insulation
By room count, the median Frisco home is larger than most: 6.8 rooms against 5.3 for the other Texas cities NumeralQ covers, which sets the scope of most insulation jobs. The typical Frisco house went up in 2009, 15 years after the median for the other Texas cities NumeralQ covers, which matters for insulation jobs.
Most Frisco homes were built in 2009 or later, under an energy code, so attics usually have some insulation already. The job is often a top-up rather than a full install.
At the midpoint of the range, the insulation job equals roughly 0.3% of Frisco's $642,100 median home value. 13 markets come out lower, so the price is small next to what homes here are worth.
Local planning note for Frisco
Frisco and Oncor's contractor-paid incentive
Frisco homes in Oncor's service area can get an efficiency incentive, but Oncor pays it to the approved contractor, who passes it on in your price. Programs typically open in February and close in November or when funds run out. Our source is a 2022 article, so check current details. Extra attic insulation is covered.
Local planning note for Frisco
How Frisco compares with nearby cities
Against home values, an insulation job costs Frisco and McKinney owners the same share, 0.3% of the median home, while Plano is at 0.4%.
Frisco, Plano and McKinney share one BLS metro pay figure for insulation workers (Dallas-Fort Worth-Arlington, TX), so labor rates alone don't explain a gap between insulation job quotes in these cities.
| City | Typical job (midpoint) | Share of median home value | Pay for insulation workers vs U.S. |
|---|---|---|---|
| Frisco | $1,640 | 0.3% | +2% |
| Plano | $1,640 | 0.4% | +2% |
| McKinney | $1,640 | 0.3% | +2% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Insulation targets for Frisco
For climate zone 3A (Collin County), ENERGY STAR suggests R49 to R60 of attic insulation.
A typical year in Frisco brings 2,294 heating degree days and 2,612 cooling degree days (NOAA, 1991–2020), a standard way to measure how much heating and cooling a climate calls for.
The median Texas weather station logs 2,230 and 2,585; the median U.S. station, 5,483 and 848.
New construction in Texas follows the 2015 IRC energy chapter; retrofit jobs are often not inspected, so get the installed R-value in writing.
| Climate zone (county) | 3A |
|---|---|
| ENERGY STAR attic level | R49 to R60 |
| Heating / cooling degree days | 2,294 / 2,612 |
| Federal 25C insulation credit | Ended for work placed in service after 2025 |
| Contractor license (Texas) | No state general or remodeling license; some cities register contractors |
| Where to check a license | City or county building department |
Local data checked October 2026 · Sources at the bottom of the page
Frisco Adopted Building Codes
City rule
Frisco utilizes the 2024 International Energy Conservation Code and the 2024 International Residential Code for residential energy compliance as of June 2026.
Regulations are subject to local amendments not fully detailed.
Adopted Codes (City of Frisco) · Checked October 10, 2026
How Frisco compares with nearby cities
Labor rates
On an insulation job in Frisco, insulation workers earn a median $24.00 an hour, 2% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $48-$62 per worker-hour.
Insulation Workers, Floor, Ceiling, and Wall
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Frisco
Get every quote to include
- assembly, insulation material, coverage area, and target R-value
- air sealing, preparation, and removal of existing material
- moisture or vapor-control details and ventilation scope
- access constraints, cleanup, and any excluded repairs
Contractors per home in Frisco
Insulation installers per home in Collin County
Census business counts for 2023 show 22 drywall and insulation contractors based in Collin County, the pool most Frisco homeowners draw on for an insulation job. That's 0.5 per 10,000 homes, 63% below the U.S. rate of 1.4, the 10th lowest among the 135 counties on this site. The Census counts drywall and insulation firms together, so not every one of them does insulation.
With a thin local pool, the best insulation installers in Frisco tend to book up first. Ask about lead time when you get insulation job quotes, and don't rule out contractors from the next county over. McKinney and Plano share the same county figure.
Frequently Asked Questions
How much does Insulation cost in Frisco, TX?
Insulation cost in Frisco, TX: $1,230-$2,050 (typical job: 1,000 sq ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Dallas-Fort Worth-Arlington area compare with the national median?
Median pay for construction laborers in the Dallas-Fort Worth-Arlington, TX metro area is 2% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How old are homes in Frisco?
About 2% were built before 1980, according to the Census Bureau, against 33% across Texas and 50% nationally.
How do most Frisco homes heat?
About 54% heat mainly with piped gas and 44% with electricity, according to the Census Bureau's 2020–2024 survey.
Ready for your own number?
We have already loaded Frisco prices for this insulation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Ready to get energy efficient? We show you how (Oncor), checked October 11, 2026 (https://www.oncor.com/content/oncorwww/wire/en/home/energy-efficiency/ready-to-get-energy-efficient--we-show-you-how.html)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- DOE climate zone guide source
- ENERGY STAR source
- NOAA climate normals source
- DOE building energy codes source
- IRS source
We start from a national baseline and adjust it for Frisco (0.99×). How we estimate