Furnace replacement cost by size
Find your size in the table. In New Hampshire the range runs from $5,130-$8,150 for 40,000 BTU to $6,000-$9,890 for 120,000 BTU; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 40,000 BTU | $5,130-$8,150 |
| 60,000 BTU | $5,340-$8,580 |
| 80,000 BTUMost common | $5,560-$9,020 |
| 100,000 BTU | $5,780-$9,460 |
| 120,000 BTU | $6,000-$9,890 |
Furnace replacement cost by material or type
In New Hampshire, electric furnace comes in about 30% under gas furnace, 95-96% AFUE, and gas boiler, hot water (high efficiency) runs roughly 1.3 times the price, so get each option you are weighing priced on the same quote (gas furnace, 95-96% AFUE here: $5,560-$9,020).
What will your New Hampshire furnace cost?
We have already loaded New Hampshire prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Manchester | $5,530-$8,980 | Manchester |
| Nashua | $5,530-$8,980 | Nashua |
State conditions
Local planning note for New Hampshire
New Hampshire city by city: what actually changes
BLS reports one wage figure for HVAC technicians across Manchester and Nashua, 20% above the U.S. median, so labor does not explain furnace price gaps between them. Gas heat is most common in Nashua, where 70% of homes use it, and least common in Manchester (50%), so an all-electric quote is a bigger switch in Nashua.
Against home values, a typical furnace job is about the same everywhere in New Hampshire we cover, 1.8% to 2.0% of the median home.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Manchester | +20% | Not published | 50% | 2.0% |
| Nashua | +20% | Not published | 70% | 1.8% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for New Hampshire
Sales tax on a furnace replacement in New Hampshire
New Hampshire has no general sales tax. That keeps the price of a furnace replacement closer to the quote than in most states.
Labor rates
On a furnace replacement job in New Hampshire, HVAC technicians earn a median $35.51 an hour. After insurance, payroll taxes and overhead, contractors bill about $71-$92 per worker-hour.
Before you sign in New Hampshire
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for New Hampshire
How New Hampshire lien law affects a furnace replacement
A mechanic's lien is a claim against your house by someone who worked on your furnace replacement or supplied material for it and wasn't paid. In New Hampshire, a sub or supplier without a contract with you must give you notice before furnishing work, and a later notice covers only amounts then due (RSA 447:5-6).
After a notice, the contractor must give you written accounts every 30 days and you must hold back enough to cover the claim (447:8). A lien expires after 120 days unless secured by a court attachment. On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in New Hampshire?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across New Hampshire?
Not much. Across the 2 New Hampshire cities we cover, pay for HVAC technicians stays within a few points, from 20% above the national median in Manchester to 20% above in Manchester (BLS, May 2025).
Who licenses furnace installers in New Hampshire?
Gas fitter license for gas work; no HVAC license. You can confirm a license is active through the Local building department.
Would a heat pump cost less to run than a gas furnace in New Hampshire?
Furnace replacement cost in New Hampshire: $5,560-$9,020 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded New Hampshire prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- NH utilities, checked 2026-10-26 (https://www.nhsaves.com/)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- New Hampshire Department of Revenue Administration, checked November 10, 2026 (https://www.revenue.nh.gov/)
- Levelset, New Hampshire lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/new-hampshire-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE