Siding Replacement Cost in New Hampshire: 2026 City-by-City Guide

Typical New Hampshire job · 1,500 sq ft of siding
$8,350-$10,530About the U.S. price

Plan on $8,350-$10,530 for 1,500 sq ft of new siding in New Hampshire, close to the national typical job.

Your options

Budget
Vinyl lap siding
$8,350-$10,530
Most common
Vinyl lap siding
$8,350-$10,530
Premium
Brick veneer
$19,030-$28,960
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Siding replacement cost by size

Size moves the price more than anything else. In New Hampshire, going from 1,000 sq ft of siding to 3,000 sq ft of siding takes the job from $5,740-$7,290 to $16,170-$20,260, so have the size measured before comparing quotes.

SizeCost
1,000 sq ft of siding$5,740-$7,290
1,500 sq ft of sidingMost common$8,350-$10,530
2,000 sq ft of siding$10,960-$13,780
2,500 sq ft of siding$13,560-$17,020
3,000 sq ft of siding$16,170-$20,260
Cost by material

Siding replacement cost by material or type

In New Hampshire, vinyl lap siding is already the lowest-cost choice, at $8,350-$10,530; stepping up to brick veneer costs about 2.5 times as much ($19,030-$28,960).

What will your New Hampshire siding job cost?

We have already loaded New Hampshire prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Manchester$8,350-$10,550Manchester
Nashua$8,350-$10,550Nashua
State conditions

State conditions

Local planning note for New Hampshire

How New Hampshire's cities differ for this job

BLS reports one wage figure for carpenters across Manchester and Nashua, 1% above the U.S. median, so labor does not explain siding price gaps between them. Only Manchester publishes a permit fee we could price for the standard job, about $175. Elsewhere in New Hampshire, ask the building department before you sign.

For siding jobs, strong-wind risk is rated Relatively High across the covered New Hampshire counties. Against home values, a typical siding job is about the same everywhere in New Hampshire we cover, 2.3% to 2.6% of the median home.

CityPay for carpenters vs U.S.Remodel permit ($15,000 job)FEMA strong-wind risk (county)Typical job as share of median home value
Manchester+1%$175Relatively High2.6%
Nashua+1%Not publishedRelatively High2.3%

Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.

Local planning note for New Hampshire

Sales tax on a siding job in New Hampshire

New Hampshire has no general sales tax. That keeps the price of a siding job closer to the quote than in most states.

Labor

Labor rates

For siding replacement in New Hampshire, contractors bill about $59-$76 per worker-hour for carpenters, whose median pay is $29.42 an hour, 1% above the U.S. median. The difference covers insurance, taxes, overhead and profit.

Before you sign

Before you sign in New Hampshire

Get every quote to include

  • material, profile, measured area, and finish
  • removal, substrate repairs, and water-resistive barrier work
  • flashing, trim, penetrations, and disposal
  • whether property-specific historic or design review is in scope

Local planning note for New Hampshire

Protecting your New Hampshire home from contractor liens

A mechanic's lien is a claim against your house by someone who worked on your siding job or supplied material for it and wasn't paid. In New Hampshire, a sub or supplier without a contract with you must give you notice before furnishing work, and a later notice covers only amounts then due (RSA 447:5-6).

After a notice, the contractor must give you written accounts every 30 days and you must hold back enough to cover the claim (447:8). A lien expires after 120 days unless secured by a court attachment. Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.

Common questions

Frequently Asked Questions

What does siding replacement cost in New Hampshire?

They are planning estimates, not contractor bids.

Does pay for carpenters vary across New Hampshire?

Not much. Across the 2 New Hampshire cities we cover, pay for carpenters stays within a few points, from 1% above the national median in Manchester to 1% above in Manchester (BLS, May 2025).

Do siding contractors need a license in New Hampshire?

New Hampshire's rule is no state contractor license or registration. The Local building department has a free license lookup.

Does hail damage siding in New Hampshire?

With 248 large-hail reports in ten years (NOAA), it's worth asking how each siding option handles impact.

Is wind a concern for siding in New Hampshire?

It is. NOAA logged 840 reports of 58-mph-plus wind in New Hampshire from 2016 to 2025. Ask for the siding's wind rating and the fastening pattern it requires.

Does New Hampshire's climate affect which siding to choose?

All of New Hampshire's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.

Ready for your own number?

We have already loaded New Hampshire prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • This Old House cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • New Hampshire Department of Revenue Administration, checked November 10, 2026 (https://www.revenue.nh.gov/)
  • Levelset, New Hampshire lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/new-hampshire-lien-law-faqs/)

Installed: Vinyl lap siding

$8,350-$10,530NumeralQ planning estimate
Get my estimate