Deck & Patio Cost in New Hampshire: 2026 City-by-City Guide

Typical New Hampshire job · 320 sq ft
$5,380-$7,490About the U.S. price

Plan on $5,380-$7,490 for a 320 sq ft deck or patio in New Hampshire, close to the national typical job.

Your options

Budget
Patio: plain concrete
$2,410-$3,210
Most common
Deck: pressure-treated wood
$5,380-$7,490
Premium
Deck: ipe hardwood
$12,370-$17,810
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Deck or patio cost by size

The biggest driver is size: 10 x 10 ft costs $1,680-$2,340 in New Hampshire, while 20 x 30 ft costs $10,100-$14,030, about 500% more. Ask every contractor to quote the same measured size.

SizeCost
10 x 10 ft$1,680-$2,340
12 x 12 ft$2,420-$3,370
12 x 16 ft$3,230-$4,490
16 x 16 ft$4,310-$5,990
16 x 20 ftMost common$5,380-$7,490
20 x 20 ft$6,730-$9,360
20 x 30 ft$10,100-$14,030
Cost by material

Deck or patio cost by material or type

In New Hampshire, patio: plain concrete comes in about 56% under deck: pressure-treated wood, and deck: ipe hardwood runs roughly 2.3 times the price, so get each option you are weighing priced on the same quote (deck: pressure-treated wood here: $5,380-$7,490).

What will your New Hampshire deck or patio cost?

We have already loaded New Hampshire prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Manchester$5,390-$7,490Manchester
Nashua$5,390-$7,490Nashua
State conditions

State conditions

Local planning note for New Hampshire

How New Hampshire's cities differ for this job

Pay for carpenters is the same in every covered New Hampshire city (1% above the U.S. median), because they share one metro or state wage figure, so deck and patio prices here differ for other reasons. Only Manchester publishes a permit fee we could price for the standard job, about $175. Elsewhere in New Hampshire, ask the building department before you sign.

Frost exposure is similar across New Hampshire's covered cities, 129 to 129 freezing nights a year per NOAA normals. Against home values, a typical deck and patio job is about the same everywhere in New Hampshire we cover, 1.6% to 1.8% of the median home.

CityPay for carpenters vs U.S.Remodel permit ($15,000 job)Nights at or below 32°F a yearTypical job as share of median home value
Manchester+1%$1751291.8%
Nashua+1%Not published1291.6%

Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.

Local planning note for New Hampshire

Sales tax on a deck or patio in New Hampshire

New Hampshire has no general sales tax. That keeps the price of a deck or patio closer to the quote than in most states.

Labor

Labor rates

On a deck or patio job in New Hampshire, carpenters earn a median $29.42 an hour, 1% above the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $59-$76 per worker-hour.

Before you sign

Before you sign in New Hampshire

Get every quote to include

  • measured dimensions, height, stairs, and guard or rail scope
  • footings, attachment details, and framing materials
  • decking or patio surface, demolition, and disposal
  • grading, drainage, access, and site restoration

Local planning note for New Hampshire

Protecting your New Hampshire home from contractor liens

If a sub or supplier on your deck or patio isn't paid, the law may let them file a lien on the house even when you paid your contractor. In New Hampshire, a sub or supplier without a contract with you must give you notice before furnishing work, and a later notice covers only amounts then due (RSA 447:5-6).

After a notice, the contractor must give you written accounts every 30 days and you must hold back enough to cover the claim (447:8). A lien expires after 120 days unless secured by a court attachment. On a deck or patio, the lumber yard or concrete supplier that sold to your contractor on credit is the party most likely to send a lien notice.

Common questions

Frequently Asked Questions

What does a deck or patio cost in New Hampshire?

They are planning estimates, not contractor bids.

Does pay for carpenters vary across New Hampshire?

Not much. Across the 2 New Hampshire cities we cover, pay for carpenters stays within a few points, from 1% above the national median in Manchester to 1% above in Manchester (BLS, May 2025).

Do deck builders need a license in New Hampshire?

New Hampshire's rule is no state contractor license or registration. The Local building department has a free license lookup.

Does New Hampshire's climate affect deck materials?

All of New Hampshire's counties are in DOE's moist or marine climate zones. Use ground-contact treated lumber for posts and leave gaps for drainage.

Can a new deck attach to an older New Hampshire home?

Usually, but the inspector will check the rim joist the ledger bolts into. That matters here, where 52% of homes were built before 1980 (Census).

Does frost limit when a deck can be built in New Hampshire?

It can. Concrete footings shouldn't be poured into frozen ground, and 100% of New Hampshire's counties are in climate zone 5 or colder (DOE). Ask your builder how winter affects their schedule.

Ready for your own number?

We have already loaded New Hampshire prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, nights at or below 32°F (https://www.ncei.noaa.gov/products/land-based-station/us-climate-normals)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • New Hampshire Department of Revenue Administration, checked November 10, 2026 (https://www.revenue.nh.gov/)
  • Levelset, New Hampshire lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/new-hampshire-lien-law-faqs/)

Installed: Deck: pressure-treated wood

$5,380-$7,490NumeralQ planning estimate
Get my estimate