Furnace replacement cost by size
Find your size in the table. In Kansas the range runs from $4,610-$7,470 for 40,000 BTU to $5,480-$9,220 for 120,000 BTU; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,610-$7,470 |
| 60,000 BTU | $4,820-$7,910 |
| 80,000 BTUMost common | $5,040-$8,340 |
| 100,000 BTU | $5,260-$8,780 |
| 120,000 BTU | $5,480-$9,220 |
Furnace replacement cost by material or type
Material choice is the second big lever in Kansas. Electric furnace runs $3,340-$5,790, about 32% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $7,170-$11,360.
What will your Kansas furnace cost?
We have already loaded Kansas prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Overland Park | $5,130-$8,460 | Overland Park |
| Wichita | $5,000-$8,300 | Wichita |
State conditions
Local planning note for Kansas
Comparing Kansas's cities beyond the price
For furnace replacements, pay for HVAC technicians ranges from 2% below the U.S. median in Wichita to 3% above the U.S. median in Overland Park, a 5-point gap that shows up most in labor-heavy bids. Gas heat is about equally common across Kansas's covered cities, 65% to 69% of homes, so the fuel question is similar everywhere.
Next to what homes are worth, Wichita is the most expensive place in Kansas to do this job (3.5% of the median home value) and Overland Park the least (1.6%).
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Overland Park | +3% | Not published | 65% | 1.6% |
| Wichita | -2% | Not published | 69% | 3.5% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
For furnace replacement in Kansas, contractors bill about $58-$76 per worker-hour for HVAC technicians, whose median pay is $29.07 an hour, 1% below the U.S. median. The difference covers insurance, taxes, overhead and profit.
Before you sign in Kansas
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for Kansas
Protecting your Kansas home from contractor liens
Anyone who works on a furnace replacement or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. Kansas is a full-price lien state, but on an owner-occupied home a sub or supplier must mail you a warning statement first, unless the claim is $250 or less (K.S.A. 60-1103a).
Payments you make after receiving that warning are not protected (60-1103(d)), so once one arrives, pay that party directly or by joint check. On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in Kansas?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Kansas?
Yes. Pay for HVAC technicians runs from 2% below the national median in Wichita to 3% above in Overland Park (BLS, May 2025).
Who licenses furnace installers in Kansas?
Kansas's rule is local only. The Kansas Attorney General (roofing) has a free license lookup.
Would a heat pump cost less to run than a gas furnace in Kansas?
Furnace replacement cost in Kansas: $5,040-$8,340 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded Kansas prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- Levelset, Kansas lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/kansas-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE