Furnace replacement cost by size
The biggest driver is size: 40,000 BTU costs $4,570-$7,420 in Wichita, while 120,000 BTU costs $5,440-$9,170, about 22% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,570-$7,420 |
| 60,000 BTU | $4,790-$7,860 |
| 80,000 BTUMost common | $5,000-$8,300 |
| 100,000 BTU | $5,220-$8,730 |
| 120,000 BTU | $5,440-$9,170 |
Installed: Gas furnace, 95-96% AFUE
Furnace replacement cost by material or type
Material choice is the second big lever in Wichita. Electric furnace runs $3,300-$5,750, about 32% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $6,930-$11,050.
| Type | Typical job |
|---|---|
| Electric furnace | $3,300-$5,750 |
| Gas furnace, 80% AFUE (single stage) | $4,300-$6,770 |
| Gas furnace, 95-96% AFUEMost common | $5,000-$8,300 |
| Propane furnace (95%) | $5,420-$8,820 |
| Oil furnace | $6,430-$10,250 |
| Gas furnace, 96%+ 2-stage or modulating | $6,750-$10,230 |
| Gas boiler, hot water (high efficiency) | $6,930-$11,050 |
Materials include waste and contractor markup. 80,000 BTU furnace
What will your Wichita furnace cost?
We have already loaded Wichita prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 5 extras are where quotes most often grow. The largest single line in Wichita is "Ductwork repairs" at $2,430-$3,440 for the job, so ask whether it is included.
- New PVC venting (when going 80% to 95%)$401-$1,060 / job
- Gas line work$291-$860 / job
- Ductwork repairs$2,430-$3,440 / job
- Variable-speed blower upgrade$460-$1,110 / job
- Smart thermostat$267-$497 / each
Show material-only prices
| Add-on | Materials |
|---|---|
| New PVC venting (when going 80% to 95%) | $173-$460 / job |
| Gas line work | $115-$402 / job |
| Ductwork repairs | $230-$575 / job |
| Variable-speed blower upgrade | $460-$1,040 / job |
| Smart thermostat | $132-$322 / each |
Installed price per unit
What makes Wichita different for this job
Wichita homes and the local housing stock
What Wichita's housing says about furnace work
Census figures put the median construction year at 1974 in Wichita and 1976 for the typical U.S. market on this site, and house age shapes most furnace swaps here.
At the midpoint of the range above, a typical furnace replacement costs about 3.5% of Wichita's $190,800 median home value, the 20th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.
In Wichita, where 59% of homes are owner-occupied and 71% of units are houses, the choice on a furnace replacement is usually the owner's. Ask for a room-by-room load calculation (ACCA Manual J), which the residential code requires for sizing.
Furnace facts for Wichita
Wichita averages 4,414 heating degree days a year, according to NOAA's 1991–2020 normals, compared with medians of 5,096 across Kansas weather stations and 5,483 across U.S. stations. The higher the number, the more a furnace runs.
About 69% of homes in Wichita heat with piped gas, according to the Census Bureau (Kansas: 63%; U.S.: 46%).
Kansas's average residential gas price was $14.81 per Mcf in 2025 (EIA), against $15.34 nationally. Local utility rates vary.
Federal rules set an 80% AFUE minimum for new non-weatherized gas furnaces; condensing models run 90% and up and need PVC venting and a condensate drain.
| Heating degree days | 4,414 |
|---|---|
| Nights at or below 32°F | 103 |
| Gas price, Kansas 2025 | $14.81 per Mcf (U.S. $15.34) |
| Federal furnace minimum | 80% AFUE (non-weatherized gas) |
| HVAC license (Kansas) | Local only |
| Where to check a license | Kansas Attorney General (roofing) |
Local data checked October 2026 · Sources at the bottom of the page
When to plan this work in Wichita
When to schedule a furnace replacement in Wichita
In Wichita, heating and cooling run least in May and September, the two mildest months at the Wichita weather station by NOAA degree days. That's the easiest time to be without the system on the day of the work, and the time to plan a furnace replacement, rather than after a breakdown in January.
January is the heaviest heating month in Wichita, with about 986 heating degree days at the Wichita weather station, so an old furnace is most likely to fail then.
How Wichita compares with nearby cities
Labor rates
For furnace replacement in Wichita, contractors bill about $57-$74 per worker-hour for HVAC technicians, whose median pay is $28.62 an hour, 2% below the U.S. median. The difference covers insurance, taxes, overhead and profit.
HVAC technicians
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Wichita
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Contractors per home in Wichita
Contractor competition in Wichita
For replacing a furnace in Wichita, the local pool is 170 plumbing, heating and air conditioning contractors in Sedgwick County (Census, 2023): 7.5 per 10,000 homes, about the U.S. rate of 7.7. That count includes plumbers, since the Census groups them with HVAC firms.
That's a normal level of competition for Wichita, so a furnace replacement quote far above the others is worth questioning.
Who can replace a furnace or AC in Wichita
Metro/regional
In Wichita and Sedgwick County, the owner-occupant of a single-family home may get permits to repair or replace the existing air conditioning or warm-air heating system only if they do all the work and request an inspection from the Metropolitan Area Building and Construction Department. Otherwise, mechanical work is done by licensed contractors. Owner-occupants installing a new system must also pass a simplified open-book code exam and submit an installation plan.
The code says minor repairs or alterations with a price charged of $200 or less need no permit but must still meet code; the compiled code reviewed here is undated, so confirm current rules with MABCD.
Wichita-Sedgwick County Unified Building and Trade Code, Art. 5, Secs. 5.1.290 and 5.1.300 · Checked October 10, 2026 (compiled code undated)
Frequently Asked Questions
How much does Furnace Replacement cost in Wichita, KS?
Furnace replacement cost in Wichita, KS: $5,000-$8,300 (80,000 BTU furnace). Each option in the price table above has its own range.
How does pay for HVAC technicians in the Wichita area compare with the national median?
Median pay for HVAC technicians in the Wichita, KS metro area is 2% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
What climate zone is Wichita in?
Sedgwick County is in climate zone 4A on the DOE's county list, which energy codes use to set insulation and window levels.
Are federal home energy rebates available in Kansas?
Kansas's federal home electrification rebate program hasn't launched yet, according to NASEO's September 2026 status list.
Ready for your own number?
We have already loaded Wichita prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- International Code Council, 2021 International Residential Code, Chapter 14: M1401.3 (equipment sized by ACCA Manual S from Manual J loads) (https://codes.iccsafe.org/content/IRC2021P2/chapter-14-heating-and-cooling-equipment-and-appliances)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- View local evidence & sources →
- NOAA climate normals source
- EIA natural gas prices source
- DOE furnace rules source
- Kansas Attorney General (roofing) source
- DOE climate zone guide source
- NASEO source
NumeralQ planning estimate. How we estimate