Siding replacement cost by size
The biggest driver is size: 1,000 sq ft of siding costs $5,490-$6,980 in Kansas, while 3,000 sq ft of siding costs $15,470-$19,340, about 179% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $5,490-$6,980 |
| 1,500 sq ft of sidingMost common | $7,990-$10,070 |
| 2,000 sq ft of siding | $10,480-$13,160 |
| 2,500 sq ft of siding | $12,970-$16,250 |
| 3,000 sq ft of siding | $15,470-$19,340 |
Siding replacement cost by material or type
In Kansas, vinyl lap siding is already the lowest-cost choice, at $7,990-$10,070; stepping up to brick veneer costs about 2.6 times as much ($18,510-$28,300).
What will your Kansas siding job cost?
We have already loaded Kansas prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Overland Park | $8,400-$10,600 | Overland Park |
| Wichita | $7,480-$9,400 | Wichita |
State conditions
Local planning note for Kansas
Kansas city by city: what actually changes
Overland Park pays carpenters the most of Kansas's covered cities (2% above the U.S. median), and Wichita the least (16% below the U.S. median), per BLS, which moves the labor share of siding bids. Of Kansas's covered cities, Wichita is the one with a priceable permit fee online: about $213 for the standard job.
FEMA's strong-wind rating runs from Relatively Low in Johnson County (Overland Park) to Relatively High in Sedgwick County (Wichita); in the higher-rated counties, ask for the product's wind rating. Measured against home values, the same job weighs most in Wichita (4.4% of the median home) and least in Overland Park (2.3%).
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | FEMA strong-wind risk (county) | Typical job as share of median home value |
|---|---|---|---|---|
| Overland Park | +2% | Not published | Relatively Low | 2.3% |
| Wichita | -16% | $213 | Relatively High | 4.4% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
For siding replacement in Kansas, contractors bill about $55-$71 per worker-hour for carpenters, whose median pay is $27.39 an hour. The difference covers insurance, taxes, overhead and profit.
Before you sign in Kansas
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Local planning note for Kansas
Protecting your Kansas home from contractor liens
A mechanic's lien is a claim against your house by someone who worked on your siding job or supplied material for it and wasn't paid. Kansas is a full-price lien state, but on an owner-occupied home a sub or supplier must mail you a warning statement first, unless the claim is $250 or less (K.S.A. 60-1103a).
Payments you make after receiving that warning are not protected (60-1103(d)), so once one arrives, pay that party directly or by joint check. Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.
Frequently Asked Questions
What does siding replacement cost in Kansas?
They are planning estimates, not contractor bids.
Does pay for carpenters vary across Kansas?
Yes. Pay for carpenters runs from 16% below the national median in Wichita to 2% above in Overland Park (BLS, May 2025).
Do siding contractors need a license in Kansas?
Yes. In Kansas: no state general contractor license; cities and counties license. Look the contractor up with the Kansas Attorney General (roofing) before you sign.
Is wind a concern for siding in Kansas?
It is. NOAA logged 7,430 reports of 58-mph-plus wind in Kansas from 2016 to 2025. Ask for the siding's wind rating and the fastening pattern it requires.
Does Kansas's climate affect which siding to choose?
All of Kansas's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.
Ready for your own number?
We have already loaded Kansas prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- Levelset, Kansas lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/kansas-lien-law-faqs/)
Installed: Vinyl lap siding