Fence Installation Cost in San Francisco, CA: 2026 Local Guide

Typical San Francisco job · 150 linear ft
$3,180-$5,2905% above U.S.

In San Francisco, 150 linear ft of new fence usually costs $3,180-$5,290, 5% over the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$910-$1,650
Most common
Wood privacy, 6 ft pressure-treated
$3,180-$5,290
Premium
Composite privacy, 6 ft
$6,560-$10,190
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Find your size in the table. In San Francisco the range runs from $710-$1,150 for 25 linear ft to $8,110-$13,590 for 400 linear ft; a quote that does not state the measured size is hard to compare.

SizeCost
25 linear ft$710-$1,150
50 linear ft$1,210-$1,980
100 linear ft$2,190-$3,640
150 linear ftMost common$3,180-$5,290
200 linear ft$4,170-$6,950
300 linear ft$6,140-$10,270
400 linear ft$8,110-$13,590

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in San Francisco, and farm wire or electric trims about 70%.

TypeTypical jobInstalled
Farm wire or electric$910-$1,650$4.63-$8.86 installed
Split rail (2-3 rail)$1,650-$2,420$9.57-$14.01 installed
Chain link, 4 ft galvanized$2,710-$3,960$16.64-$24.29 installed
Wood privacy, 6 ft pressure-treatedMost common$3,180-$5,290$19.73-$33.17 installed
Wood picket, 4 ft$3,570-$5,030$22.32-$31.37 installed
Cedar privacy, 6 ft$3,870-$5,910$24.37-$37.27 installed
Vinyl privacy, 6 ft$4,040-$6,480$25.50-$41.06 installed
Steel ornamental, 4-5 ft$4,610-$6,970$29.25-$44.31 installed
Aluminum ornamental, 4-5 ft$4,690-$6,800$29.82-$43.23 installed
Composite privacy, 6 ft$6,560-$10,190$42.28-$65.83 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your San Francisco fence cost?

We have already loaded San Francisco prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in San Francisco is "Drive gate (double)" at $1,490-$3,310 each, so ask whether it is included.

  • Walk gate$375-$694 / each
  • Drive gate (double)$1,490-$3,310 / each
  • Remove old fence$4.78-$6.22 / linear ft
  • Sloped or rocky ground (extra per ft)$3.07-$4.97 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes San Francisco different for this job

San Francisco homes and the local housing stock

Who builds fences in San Francisco

With 70% of units in multi-unit buildings, a fence in San Francisco often needs association approval, and HOA rules can set materials and colors.

High home values make the new fence a small slice in San Francisco: about 0.3% of the $1,394,500 median home, the lowest among the 147 markets we price.

Local planning note for San Francisco

How San Francisco compares with nearby cities

San Francisco ties with San Jose at 0.3% of the median home value for a typical new fence.

For a new fence in San Francisco or next door, pay for fence installers is where the three split most: San Francisco is 22% above the U.S. median and Sacramento is 2% above the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.
San Francisco$4,2350.3%+22%
San Jose$4,2300.3%+21%
Sacramento$4,0450.8%+2%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

San Francisco Fence Installation Pricing — 2026 Local Market

Fence installation cost in San Francisco, CA: $3,180-$5,290 (typical job: 150 linear ft).

Before you fence in San Francisco

NOAA's climate normals count about 0 freezing nights a year in San Francisco, compared with medians of 18 across California weather stations and 124 across U.S. stations.

Freezing is rare here, so post depth is mostly about soil and fence height; ask how deep the posts go.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in San Francisco at a glance
Nights at or below 32°F0
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (California)CSLB license unless under $1,000, no permit and no employees
Where to check a licenseCalifornia Contractors State License Board

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for San Francisco

Fence rules in San Francisco

RuleValue
Front yard3 ft solid, 6 ft if 75% open (front setback)
Back and side yard10 ft (side/rear required yards)
Permit neededpermit for fences over 3 ft in front or over 6 ft at side/rear
Surveyplans show fence location, setbacks, height
Pool barrier60 in

Fence permits and heights in San Francisco

In San Francisco, the Planning Department's fence handout says a building permit is not required for a fence 3 feet or less at the front of a property or 6 feet or less along side or rear property lines. Within a required front setback, fences are limited to 3 feet if solid or 6 feet if at least 75 percent open, and in the required rear yard the limit is 10 feet.

The handout is dated January 2019, and front setback depth depends on neighboring buildings; confirm with SF Planning.

SF Planning: General Planning Information, Fences · Handout dated January 2019; checked October 11, 2026

Nearby pricing

How San Francisco compares with nearby cities

Labor

Labor rates

For fence installation in San Francisco, contractors bill about $56-$73 per worker-hour for fence erectors, whose median pay is $28.19 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$28.19/hrMedian pay
$56-$73/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in San Francisco

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in San Francisco, CA?

Fence installation cost in San Francisco, CA: $3,180-$5,290 (typical job: 150 linear ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the San Francisco-Oakland-Fremont area compare with the national median?

Median pay for construction laborers in the San Francisco-Oakland-Fremont, CA metro area is 22% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit San Francisco County?

NOAA logged 1 thunderstorm wind reports of 58 mph or more in San Francisco County from 2016 to 2025.

Ready for your own number?

We have already loaded San Francisco prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • SF Planning - Fences, checked 2026-10-26 (https://sfplanning.org/resource/fences)
  • None, checked 2026-10-26 (https://sfplanning.org/resource/fences)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

This estimate is NumeralQ's national baseline with a San Francisco adjustment of 1.35×. How we estimate

$3,180-$5,290NumeralQ planning estimate
Get my estimate