Concrete driveway cost by size
Find your size in the table. In San Francisco the range runs from $2,220-$3,100 for 10 x 20 ft (1 car, short) to $8,940-$11,990 for 10 x 100 ft (long single); a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 10 x 20 ft (1 car, short) | $2,220-$3,100 |
| 12 x 24 ft (1 car) | $2,960-$4,080 |
| 20 x 20 ft (2 car, short) | $3,900-$5,320 |
| 24 x 24 ft (2 car)Most common | $5,380-$7,280 |
| 24 x 36 ft (3 car) | $7,800-$10,480 |
| 10 x 100 ft (long single) | $8,940-$11,990 |
Installed: Plain gray concrete, broom finish
Concrete driveway cost by material or type
Material choice is the second big lever in San Francisco. Resurfacing overlay (on sound old slab) runs $3,460-$5,110, about 32% under plain gray concrete, broom finish, while stained or saw-cut patterns costs $11,280-$15,270.
| Type | Typical job | Installed |
|---|---|---|
| Gravel (for comparison) | $1,820-$2,920 | $2.21-$3.53 installed |
| Resurfacing overlay (on sound old slab) | $3,460-$5,110 | $5.06-$7.34 installed |
| Asphalt (for comparison) | $3,980-$5,730 | $5.97-$8.42 installed |
| Plain gray concrete, broom finishMost common | $5,380-$7,280 | $8.40-$11.11 installed |
| Swirl or trowel finish | $5,710-$7,710 | $8.98-$11.86 installed |
| Rock salt finish | $6,000-$8,130 | $9.47-$12.58 installed |
| Colored concrete | $6,580-$8,940 | $10.48-$13.99 installed |
| Exposed aggregate | $6,590-$8,910 | $10.50-$13.94 installed |
Show 5 more options
| Type | Typical job | Installed |
|---|---|---|
| Broom finish with stamped border | $6,940-$9,450 | $11.10-$14.87 installed |
| Pervious (porous) concrete | $7,680-$10,570 | $12.39-$16.82 installed |
| Stamped concrete | $9,800-$13,210 | $16.08-$21.40 installed |
| Pavers (for comparison) | $10,690-$14,760 | $17.62-$24.10 installed |
| Stained or saw-cut patterns | $11,280-$15,270 | $18.64-$24.99 installed |
Materials include waste and contractor markup. Typical job: 576 sq ft
What will your San Francisco driveway cost?
We have already loaded San Francisco prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 7 extras are where quotes most often grow. The largest single line in San Francisco is "Apron / curb cut" at $998-$1,530 for the job, so ask whether it is included.
- Remove old driveway$3.29-$4.52 / sq ft
- Rebar grid (instead of mesh)$1.26-$2.57 / sq ft
- Fiber reinforcement$0.61-$0.87 / sq ft
- 6 in. slab instead of 4 in.$1.30-$1.74 / sq ft
- Apron / curb cut$998-$1,530 / job
- Heated driveway (hydronic or electric)$17.31-$27.33 / sq ft
- Sealer$0.46-$0.64 / sq ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove old driveway | $0.34-$0.69 / sq ft |
| Rebar grid (instead of mesh) | $0.52-$1.61 / sq ft |
| Fiber reinforcement | $0.11-$0.23 / sq ft |
| 6 in. slab instead of 4 in. | $0.92-$1.24 / sq ft |
| Apron / curb cut | $173-$460 / job |
| Heated driveway (hydronic or electric) | $6.90-$13.80 / sq ft |
| Sealer | $0.11-$0.18 / sq ft |
Installed price per unit
What makes San Francisco different for this job
San Francisco homes and the local housing stock
San Francisco homes and their driveways
Only 30% of units in San Francisco are houses, so for many households a driveway is an association or landlord decision. Check the HOA rules before you get bids.
Measured against the $1,394,500 median home value, a typical new concrete driveway in San Francisco is about 0.5% of the house, the lowest share of the 147 markets on this site.
Local planning note for San Francisco
San Francisco next to San Jose and Sacramento
Against home values, a new concrete driveway costs San Francisco and San Jose owners the same share, 0.5% of the median home, while Sacramento is at 1.1%.
Comparing San Francisco with its neighbors, BLS puts concrete finishers' median pay 33% above the U.S. median in San Francisco but 6% above the U.S. median in Sacramento, a gap that tends to show up in new concrete driveway quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for concrete finishers vs U.S. |
|---|---|---|---|
| San Francisco | $6,330 | 0.5% | +33% |
| San Jose | $6,305 | 0.5% | +32% |
| Sacramento | $5,440 | 1.1% | +6% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
When to plan this work in San Francisco
When to pour a driveway in San Francisco
ACI treats concrete work as cold-weather work when the air is expected to drop below 40°F while the slab cures. In San Francisco, the average low stays above that all year at the San Francisco Downtown weather station, so a driveway can be poured in any month without cold-weather protection most nights.
San Francisco Concrete Driveway Pricing — 2026 Local Market
Concrete driveway cost in San Francisco, CA: $5,380-$7,280 (typical job: 576 sq ft).
San Francisco's weather and a new driveway
NOAA's normals count about 0 freezing nights a year in San Francisco, compared with medians of 18 across California weather stations and 124 across U.S. stations.
With few freezing nights, freeze-thaw is a smaller factor; still ask for the concrete strength and thickness in writing.
A new curb cut or apron usually needs a permit from the city's public works or right-of-way office.
| Nights at or below 32°F | 0 |
|---|---|
| Yearly snowfall (nearby station) | 0.0 in |
| Yearly precipitation | 19.6 in |
| Contractor license (California) | CSLB license unless under $1,000, no permit and no employees |
| Where to check a license | California Contractors State License Board |
Local data checked October 2026 · Sources at the bottom of the page
Front setback paving limits in San Francisco
City rule
In San Francisco, on lots with a required front setback, the Planning Code's front setback landscaping and permeable-surface standards apply when a project paves or repaves more than 200 square feet of the front setback, among other triggers. The setback must then be landscaped, and at least 20 percent of the required setback area must stay unpaved and planted.
Other triggers include adding a unit, garage or parking, or 20 percent more floor area; the code applies only in the listed zoning districts.
San Francisco Planning Code Sec. 132(g), as restated in Ordinance No. 10-26 · Checked October 9, 2026
How San Francisco compares with nearby cities
Labor rates
For concrete driveway in San Francisco, contractors bill about $73-$95 per worker-hour for concrete finishers, whose median pay is $36.53 an hour. The difference covers insurance, taxes, overhead and profit.
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in San Francisco
Get every quote to include
- measured area, thickness, finish, and concrete specification
- excavation, subbase, reinforcement, joints, and drainage
- removal, haul-away, access, and site restoration
- whether curb, sidewalk, frontage, or right-of-way work is included
Frequently Asked Questions
How much does Concrete Driveway cost in San Francisco, CA?
Concrete driveway cost in San Francisco, CA: $5,380-$7,280 (typical job: 576 sq ft). Each option in the price table above has its own range.
How does pay for cement masons in the San Francisco-Oakland-Fremont area compare with the national median?
Median pay for cement masons in the San Francisco-Oakland-Fremont, CA metro area is 33% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How many 90-degree days does San Francisco get?
About 4 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.
What climate zone is San Francisco in?
San Francisco County is in climate zone 3C on the DOE's county list, which energy codes use to set insulation and window levels.
Ready for your own number?
We have already loaded San Francisco prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)
- NOAA climate normals source
- California Contractors State License Board source
- DOE climate zone guide source
We start from a national baseline and adjust it for San Francisco (1.35×). How we estimate