Furnace Replacement Cost in Texas: 2026 City-by-City Guide

Typical Texas job · 80,000 BTU furnace
$4,940-$8,210About the U.S. price

In Texas, an 80,000 BTU furnace usually costs $4,940-$8,210, close to the national typical job.

Local pay matters for furnace replacement: median pay for HVAC technicians in Texas is 5% below the national median.

Your options

Budget
Electric furnace
$3,240-$5,660
Most common
Gas furnace, 95-96% AFUE
$4,940-$8,210
Premium
Gas boiler, hot water (high efficiency)
$6,870-$10,970
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Furnace replacement cost by size

Size moves the price more than anything else. In Texas, going from 40,000 BTU to 120,000 BTU takes the job from $4,500-$7,330 to $5,370-$9,080, so have the size measured before comparing quotes.

SizeCost
40,000 BTU$4,500-$7,330
60,000 BTU$4,720-$7,770
80,000 BTUMost common$4,940-$8,210
100,000 BTU$5,150-$8,640
120,000 BTU$5,370-$9,080
Cost by material

Furnace replacement cost by material or type

In Texas, electric furnace comes in about 32% under gas furnace, 95-96% AFUE, and gas boiler, hot water (high efficiency) runs roughly 1.4 times the price, so get each option you are weighing priced on the same quote (gas furnace, 95-96% AFUE here: $4,940-$8,210).

What will your Texas furnace cost?

We have already loaded Texas prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Choose a market

Pick your city

CityTypical jobLink
Arlington$5,010-$8,300Arlington
Austin$5,050-$8,360Austin
Dallas$5,010-$8,300Dallas
Fort Worth$5,010-$8,300Fort Worth
Frisco$5,010-$8,300Frisco
Houston$4,980-$8,270Houston
McKinney$5,010-$8,300McKinney
Plano$5,010-$8,300Plano
Round Rock$5,050-$8,360Round Rock
San Antonio$4,970-$8,250San Antonio
Sugar Land$4,980-$8,270Sugar Land
The Woodlands (CDP)$4,980-$8,270The Woodlands
State conditions

State conditions

Local planning note for Texas

Texas city by city: what actually changes

BLS figures put a 4-point spread in HVAC technicians' pay across Texas: Austin at about the same as the U.S. median, San Antonio at 4% below the U.S. median, and labor is a large part of furnace replacements. Permit fees vary more than labor. For the same standard job, Houston charges about $321 and San Antonio about $83; Arlington, Austin, Dallas, Fort Worth, Frisco, McKinney, Plano, Round Rock, Sugar Land and The Woodlands do not publish a figure we could price.

Gas heat is most common in Sugar Land, where 69% of homes use it, and least common in Arlington (26%), so an all-electric quote is a bigger switch in Sugar Land. Home values change how big the bill feels: the typical job is 2.8% of the median home in San Antonio but 1.0% in Frisco.

CityPay for HVAC technicians vs U.S.HVAC permit ($12,000 job)Homes heating with gasTypical job as share of median home value
Arlington-2%Not published26%2.2%
Austin0%Not published40%1.2%
Dallas-2%Not published33%2.1%
Fort Worth-2%Not published30%2.2%
Frisco-2%Not published54%1.0%
Houston-3%$32134%2.4%
McKinney-2%Not published53%1.4%
Plano-2%Not published47%1.4%
Round Rock0%Not published50%1.6%
San Antonio-4%$8328%2.8%
Sugar Land-3%Not published69%1.5%
The Woodlands-3%Not published67%1.3%

Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.

Local planning note for Texas

Sales tax on a furnace replacement in Texas

Labor to repair or remodel a home isn't taxable in Texas; the contractor pays tax on materials (on a lump-sum job) or charges it only on separately listed materials (Tex. Tax Code 151.0047; Rule 3.357). A furnace replacement invoice that charges tax on labor is worth questioning.

Labor

Labor rates

For furnace replacement in Texas, contractors bill about $56-$72 per worker-hour for HVAC technicians, whose median pay is $27.77 an hour. The difference covers insurance, taxes, overhead and profit.

Before you sign

Before you sign in Texas

Get every quote to include

  • fuel type, equipment model, capacity, and documented sizing basis
  • venting, combustion air, gas or electrical connections, and ductwork
  • removal, startup, commissioning, and safety checks included
  • who checks and documents any required permits or inspections

Local planning note for Texas

Texas consumer protections for a furnace replacement

In Texas, a contractor with a written contract over $5,000 to improve your homestead must keep your payments in a separate construction account at a bank (Tex. Prop. Code 162.006). For a furnace replacement, keep the signed contract, every receipt and the contractor's license or registration number, since a fund claim or complaint depends on them.

Local planning note for Texas

Mechanic's liens and lien waivers in Texas

A mechanic's lien is a claim against your house by someone who worked on your furnace replacement or supplied material for it and wasn't paid. A Texas homestead can be liened only if a written contract was signed before work began, by both spouses if married, and filed with the county clerk (Prop. Code 53.254). You must also hold back 10% of the price until 30 days after completion (53.101).

The contractor owes you a "Know Your Rights and Responsibilities" disclosure before you sign (53.255), and Texas waivers must follow the statutory forms (53.284). On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.

Common questions

Frequently Asked Questions

What does furnace replacement cost in Texas?

They are planning estimates, not contractor bids.

Does pay for HVAC technicians vary across Texas?

Not much. Across the 12 Texas cities we cover, pay for HVAC technicians stays within a few points, from 4% below the national median in San Antonio to about the same as in Austin (BLS, May 2025).

Who licenses furnace installers in Texas?

Texas's rule is state air conditioning and refrigeration license (TDLR). The Texas Department of Licensing and Regulation has a free license lookup.

Would a heat pump cost less to run than a gas furnace in Texas?

Furnace replacement cost in Texas: $4,940-$8,210 (80,000 BTU furnace).

What is the minimum furnace efficiency allowed?

80% AFUE for a standard indoor gas furnace under current DOE rules.

Ready for your own number?

We have already loaded Texas prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • This Old House cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • Austin Energy, checked 2026-10-26 (https://austinenergy.com/en/energy-efficiency/rebates-incentives/residential)
  • CPS Energy, checked 2026-10-26 (https://www.cpsenergy.com/en/my-home/savenow.html)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • Tex. Prop. Code 162.006, checked November 10, 2026 (https://texas.public.law/statutes/tex._prop._code_section_162.006)
  • Texas Comptroller Publication 94-116, checked November 10, 2026 (https://comptroller.texas.gov/taxes/publications/94-116.php)
  • Levelset, Texas lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/texas-lien-law-faqs/)

Installed: Gas furnace, 95-96% AFUE

$4,940-$8,210NumeralQ planning estimate
Get my estimate