Fence Installation Cost in Austin, TX: 2026 Local Guide

Typical Austin job · 150 linear ft
$2,820-$4,8305% below U.S.

Plan on $2,820-$4,830 for 150 linear ft of new fence in Austin, 5% below the national typical job.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$630-$1,280
Most common
Wood privacy, 6 ft pressure-treated
$2,820-$4,830
Premium
Composite privacy, 6 ft
$6,170-$9,680
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

Size moves the price more than anything else. In Austin, going from 25 linear ft to 400 linear ft takes the job from $600-$1,000 to $7,260-$12,470, so have the size measured before comparing quotes.

SizeCost
25 linear ft$600-$1,000
50 linear ft$1,040-$1,770
100 linear ft$1,930-$3,300
150 linear ftMost common$2,820-$4,830
200 linear ft$3,710-$6,360
300 linear ft$5,480-$9,420
400 linear ft$7,260-$12,470

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

In Austin, farm wire or electric comes in about 75% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.1 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,820-$4,830).

TypeTypical jobInstalled
Farm wire or electric$630-$1,280$3.17-$6.95 installed
Split rail (2-3 rail)$1,330-$2,000$7.84-$11.77 installed
Chain link, 4 ft galvanized$2,140-$3,220$13.22-$19.84 installed
Wood picket, 4 ft$2,760-$3,980$17.35-$24.92 installed
Wood privacy, 6 ft pressure-treatedMost common$2,820-$4,830$17.75-$30.58 installed
Cedar privacy, 6 ft$3,500-$5,420$22.28-$34.55 installed
Vinyl privacy, 6 ft$3,680-$6,000$23.47-$38.42 installed
Steel ornamental, 4-5 ft$4,000-$6,180$25.64-$39.61 installed
Aluminum ornamental, 4-5 ft$4,390-$6,410$28.19-$41.12 installed
Composite privacy, 6 ft$6,170-$9,680$40.08-$62.97 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Austin fence cost?

We have already loaded Austin prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 4 items your quote includes. The costliest line in Austin is "Drive gate (double)" at $1,160-$2,880 each.

  • Walk gate$278-$567 / each
  • Drive gate (double)$1,160-$2,880 / each
  • Remove old fence$3.04-$3.95 / linear ft
  • Sloped or rocky ground (extra per ft)$2.16-$3.79 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Austin different for this job

Austin homes and the local housing stock

Who builds fences in Austin

With 52% of units in multi-unit buildings, a fence in Austin often needs association approval, and HOA rules can set materials and colors.

At the midpoint of the range, the new fence equals roughly 0.7% of Austin's $555,300 median home value. 17 markets come out lower, so the price is small next to what homes here are worth.

Local planning note for Austin

Austin, Round Rock and San Antonio side by side

Next to Round Rock and San Antonio, a new fence is the lightest lift in Austin relative to home value, at 0.7% of the median home.

Getting new fence bids from outside Austin? The Round Rock and San Antonio pages below show the full price ranges there.

CityTypical job (midpoint)Share of median home valuePay for fence installers vs U.S.Permit for a 150 ft fence
Austin$3,8250.7%-22% (state figure)Not published
Round Rock$3,8250.9%-22% (state figure)Not published
San Antonio$3,8251.6%-22% (state figure)$29

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

Projects exempt from permits in Austin

Austin's amended residential code exempts from permits fences up to 7 feet, sidewalks, driveways and flatwork outside the public right-of-way, and detached decks of 200 square feet or less, no more than 30 inches above grade and not serving an exit, though fences and decks lose the exemption in a flood hazard area. Replacing up to 128 square feet of siding that is not fire-rated is also exempt.

A driveway approach in the public right-of-way needs separate approval, and work without a permit must still meet code.

Austin Land Development Code Sec. 25-12-243 (R105.2 Work exempt from permit) · Checked October 8, 2026

Fence height limits in Austin

In Austin, a solid fence along a property line may be up to 6 feet above natural grade, or 7 feet where the grade changes at least 1 foot along the run. It may reach 8 feet with written consent of each adjoining owner plus a 2-foot grade change within 50 feet or a climbable hazard such as a pool, and ornamental fences with a solid-to-open ratio no more than 1:4 have no height limit.

Other rules such as sight triangles were not captured, and 8 feet is also allowed on or within building setback lines.

Austin Land Development Code Sec. 25-2-899 Fences as accessory uses · Checked October 8, 2026

Historic review for exterior work in Austin

For homes that are Austin historic landmarks or contributing buildings in a local historic district, a certificate of appropriateness is required to change, alter or remove an exterior feature, including replacing windows, doors, siding or roof materials, whether or not a building permit is needed. The historic preservation officer can exempt in-kind repair and some minor work not visible from the street, such as a deck or fence, but a change to a landmark's exterior color always needs a certificate.

Applies only to designated landmarks and contributing buildings in historic districts; the color rule is written for landmarks, not district houses.

Austin Land Development Code Secs. 25-11-211 and 25-11-212 · Checked October 8, 2026

Wildfire area building rules in Austin

For properties in Austin's mapped wildland-urban interface area, roof coverings may not be wood shakes, wood shingles or similar combustible material, even if fire-retardant treated, and buildings built or modified there must meet ignition-resistant construction standards by proximity zone. On sites classified as extreme hazard, existing structures and features such as fences and decks cannot get permits for additions or changes until hazard mitigation is done.

This applies only to properties on the adopted wildland-urban interface map, and zone-specific deck and siding details are not shown here.

Austin Land Development Code Sec. 25-12-183 (local wildland-urban interface code amendments) · Checked October 8, 2026

Austin's climate and fence work

Austin averages 12 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 41 at the median Texas station and 124 at the median U.S. station.

Frost heave is a small factor here; ask how deep posts go for the height you want.

The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.

Call 811 a few days before digging so buried utility lines get marked; it's free.

Fences in Austin at a glance
Nights at or below 32°F12
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Local rules and records for Austin

Fence rules in Austin

RuleValue
Front yardSolid fence up to 6 ft on a property line (8 ft within building setback lines); ornamental fences (20% or less solid) not height-limited
Back and side yard6 ft on property line, up to 7 ft at grade changes, up to 8 ft with neighbor consent
Permit neededOver 7 ft anywhere; over 6 ft along public right-of-way (needs variance); any fence in a floodplain
SetbackCorner lots need Transportation and Public Works sight-line approval
Nearby pricing

How Austin compares with nearby cities

Labor

Labor rates

On a fence installation job in Austin, fence erectors earn a median $17.92 an hour. After insurance, payroll taxes and overhead, contractors bill about $36-$47 per worker-hour.

Fence Erectors

$17.92/hrMedian pay
$36-$47/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Austin

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Austin, TX?

Fence installation cost in Austin, TX: $2,820-$4,830 (typical job: 150 linear ft). The table near the top of the page prices each option separately.

How does pay for construction laborers in the Austin-Round Rock-San Marcos area compare with the national median?

Median pay for construction laborers in the Austin-Round Rock-San Marcos, TX metro area is 7% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Travis County?

NOAA logged 84 thunderstorm wind reports of 58 mph or more in Travis County from 2016 to 2025.

Ready for your own number?

We have already loaded Austin prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • City of Austin Development Services, Fencing Regulations, checked 2026-10-26 (https://www.austintexas.gov/page/fencing-regulations)
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)

We start from a national baseline and adjust it for Austin (0.98×). How we estimate

$2,820-$4,830NumeralQ planning estimate
Get my estimate