Concrete Driveway Cost in Austin, TX: 2026 Local Guide

Typical Austin job · 576 sq ft
$4,070-$5,5808% below U.S.

In Austin, a 576 sq ft concrete driveway usually costs $4,070-$5,580, 8% under the U.S. figure.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$2,560-$3,940
Most common
Plain gray concrete, broom finish
$4,070-$5,580
Premium
Stained or saw-cut patterns
$8,180-$11,240
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

Size moves the price more than anything else. In Austin, going from 10 x 20 ft (1 car, short) to 10 x 100 ft (long single) takes the job from $1,700-$2,430 to $6,750-$9,140, so have the size measured before comparing quotes.

SizeCost
10 x 20 ft (1 car, short)$1,700-$2,430
12 x 24 ft (1 car)$2,260-$3,160
20 x 20 ft (2 car, short)$2,960-$4,100
24 x 24 ft (2 car)Most common$4,070-$5,580
24 x 36 ft (3 car)$5,890-$8,000
10 x 100 ft (long single)$6,750-$9,140

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

In Austin, resurfacing overlay (on sound old slab) comes in about 33% under plain gray concrete, broom finish, and stained or saw-cut patterns runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (plain gray concrete, broom finish here: $4,070-$5,580).

TypeTypical jobInstalled
Gravel (for comparison)$1,550-$2,560$1.92-$3.15 installed
Resurfacing overlay (on sound old slab)$2,560-$3,940$3.67-$5.53 installed
Asphalt (for comparison)$3,040-$4,510$4.51-$6.53 installed
Plain gray concrete, broom finishMost common$4,070-$5,580$6.31-$8.39 installed
Swirl or trowel finish$4,290-$5,860$6.69-$8.88 installed
Rock salt finish$4,500-$6,180$7.05-$9.43 installed
Exposed aggregate$4,960-$6,780$7.85-$10.48 installed
Colored concrete$4,980-$6,860$7.88-$10.61 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$5,160-$7,140$8.19-$11.09 installed
Pervious (porous) concrete$5,860-$8,210$9.41-$12.95 installed
Stamped concrete$7,150-$9,750$11.64-$15.64 installed
Stained or saw-cut patterns$8,180-$11,240$13.43-$18.22 installed
Pavers (for comparison)$8,190-$11,510$13.45-$18.68 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Austin driveway cost?

We have already loaded Austin prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 7 items your quote includes. The costliest line in Austin is "Apron / curb cut" at $710-$1,160 for the job.

  • Remove old driveway$2.26-$3.18 / sq ft
  • Rebar grid (instead of mesh)$1.00-$2.23 / sq ft
  • Fiber reinforcement$0.44-$0.65 / sq ft
  • 6 in. slab instead of 4 in.$1.17-$1.57 / sq ft
  • Apron / curb cut$710-$1,160 / job
  • Heated driveway (hydronic or electric)$13.67-$22.60 / sq ft
  • Sealer$0.34-$0.48 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Austin different for this job

Austin homes and the local housing stock

Austin homes and their driveways

Only 48% of units in Austin are houses, so for many households a driveway is an association or landlord decision. Check the HOA rules before you get bids.

High home values make the new concrete driveway a small slice in Austin: about 0.9% of the $555,300 median home, the 15th lowest among the 147 markets we price.

Local planning note for Austin

Austin, Round Rock and San Antonio side by side

Next to Round Rock and San Antonio, a new concrete driveway is the lightest lift in Austin relative to home value, at 0.9% of the median home.

If you're comparing new concrete driveway bids from Round Rock or San Antonio with bids from Austin, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for concrete finishers vs U.S.
Austin$4,8250.9%-13%
Round Rock$4,8251.2%-13%
San Antonio$4,6952.0%-18%

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.

When to plan this work in Austin

When to pour a driveway in Austin

ACI treats concrete work as cold-weather work when the air is expected to drop below 40°F while the slab cures. In Austin, the average low stays above that all year at the Austin-Camp Mabry weather station, so a driveway can be poured in any month without cold-weather protection most nights.

Heat is the other extreme: average highs reach 90°F or more in June through September in Austin, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.

Freeze-thaw and concrete in Austin

NOAA's normals count about 12 freezing nights a year in Austin, against 41 at the median Texas station and 124 at the median U.S. station.

Freezing is limited here, so mix choice is mostly about strength and finish; ask the contractor to name the mix and its strength in the quote.

A new curb cut or apron usually needs a permit from the city's public works or right-of-way office.

Driveways in Austin at a glance
Nights at or below 32°F12
Yearly snowfall (nearby station)0.2 in
Yearly precipitation36.2 in
Contractor license (Texas)No state general or remodeling license; some cities register contractors
Where to check a licenseCity or county building department

Local data checked October 2026 · Sources at the bottom of the page

Projects exempt from permits in Austin

Austin's amended residential code exempts from permits fences up to 7 feet, sidewalks, driveways and flatwork outside the public right-of-way, and detached decks of 200 square feet or less, no more than 30 inches above grade and not serving an exit, though fences and decks lose the exemption in a flood hazard area. Replacing up to 128 square feet of siding that is not fire-rated is also exempt.

A driveway approach in the public right-of-way needs separate approval, and work without a permit must still meet code.

Austin Land Development Code Sec. 25-12-243 (R105.2 Work exempt from permit) · Checked October 8, 2026

Tree removal permits in Austin

In Austin, removing a protected tree, one 19 inches or more in diameter measured 4.5 feet above the ground, requires a city permit, on private as well as public property. Removing a heritage tree, 24 inches or more of a listed species, is prohibited unless a permit is issued, which requires a variance.

A damaged tree that is an imminent hazard may be removed without a permit within seven days of the damage; the heritage species list is not shown here.

Austin Land Development Code Secs. 25-8-602, 25-8-621, 25-8-641 · Checked October 8, 2026

Impervious cover limits in Austin

In Austin, the zoning code limits impervious cover to 45 percent of a lot in the SF-2 and SF-3 districts, 40 percent in SF-1 and 25 percent in RR.

Watershed rules can be stricter, and how decks and pervious materials are counted is not shown here, so ask Austin development staff.

Austin Land Development Code Sec. 25-2-492 Site development regulations · Checked October 8, 2026

Nearby pricing

How Austin compares with nearby cities

Labor

Labor rates

For concrete driveway in Austin, contractors bill about $48-$62 per worker-hour for concrete finishers, whose median pay is $23.76 an hour. The difference covers insurance, taxes, overhead and profit.

Cement Masons and Concrete Finishers

$23.76/hrMedian pay
$48-$62/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Austin

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included
Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Austin, TX?

Concrete driveway cost in Austin, TX: $4,070-$5,580 (typical job: 576 sq ft). The table above breaks it out by option.

How does pay for cement masons in the Austin-Round Rock-San Marcos area compare with the national median?

Median pay for cement masons in the Austin-Round Rock-San Marcos, TX metro area is 13% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Austin get?

About 123 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Austin in?

Travis County is in climate zone 2A on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Austin prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

We start from a national baseline and adjust it for Austin (0.98×). How we estimate

$4,070-$5,580NumeralQ planning estimate
Get my estimate