Fence installation cost by size
Find your size in the table. In Greenville the range runs from $600-$1,010 for 25 linear ft to $7,280-$12,510 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $600-$1,010 |
| 50 linear ft | $1,050-$1,780 |
| 100 linear ft | $1,940-$3,310 |
| 150 linear ftMost common | $2,830-$4,840 |
| 200 linear ft | $3,720-$6,380 |
| 300 linear ft | $5,500-$9,440 |
| 400 linear ft | $7,280-$12,510 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Greenville, farm wire or electric comes in about 75% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.1 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $2,830-$4,840).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $640-$1,290 | $3.21-$7.01 installed |
| Split rail (2-3 rail) | $1,340-$2,020 | $7.90-$11.84 installed |
| Chain link, 4 ft galvanized | $2,160-$3,240 | $13.33-$19.98 installed |
| Wood picket, 4 ft | $2,790-$4,010 | $17.51-$25.13 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,830-$4,840 | $17.81-$30.67 installed |
| Cedar privacy, 6 ft | $3,510-$5,440 | $22.35-$34.64 installed |
| Vinyl privacy, 6 ft | $3,690-$6,020 | $23.53-$38.50 installed |
| Steel ornamental, 4-5 ft | $4,020-$6,210 | $25.75-$39.76 installed |
| Aluminum ornamental, 4-5 ft | $4,400-$6,420 | $28.25-$41.19 installed |
| Composite privacy, 6 ft | $6,180-$9,700 | $40.15-$63.06 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Greenville fence cost?
We have already loaded Greenville prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 4 items your quote includes. The costliest line in Greenville is "Drive gate (double)" at $1,170-$2,890 each.
- Walk gate$281-$571 / each
- Drive gate (double)$1,170-$2,890 / each
- Remove old fence$3.10-$4.02 / linear ft
- Sloped or rocky ground (extra per ft)$2.19-$3.83 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Greenville different for this job
Greenville homes and the local housing stock
Greenville lots and fences
Only 47% of units in Greenville are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.
At the midpoint of the range, the new fence equals roughly 0.8% of Greenville's $487,500 median home value. 26 markets come out lower, so the price is small next to what homes here are worth.
Local planning note for Greenville
Greenville next to Columbia and Charleston
Against home values, a new fence costs Greenville and Charleston owners the same share, 0.8% of the median home, while Columbia is at 1.5%.
If you're comparing new fence bids from Columbia or Charleston with bids from Greenville, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. |
|---|---|---|---|
| Greenville | $3,835 | 0.8% | -21% (state figure) |
| Columbia | $3,835 | 1.5% | -21% (state figure) |
| Charleston | $3,835 | 0.8% | -21% (state figure) |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Greenville Fence Installation Pricing — 2026 Local Market
Fence installation cost in Greenville, SC: $2,830-$4,840 (typical job: 150 linear ft).
Greenville's climate and fence work
Greenville averages 44 nights a year at or below freezing, according to NOAA's 1991–2020 normals, against 53 at the median South Carolina station and 124 at the median U.S. station.
In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.
The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 44 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (South Carolina) | Residential builder license over $5,000; specialty registration over $500 |
| Where to check a license | SC Residential Builders Commission (LLR) |
Local data checked October 2026 · Sources at the bottom of the page
Permits in Greenville
Greenville's building code exempts fences up to 7 feet, yet the city still wants every fence application submitted and cleared by planning staff before the posts go in.
Fence height limits in Greenville house-scale districts
City rule
In Greenville's RH-A house-scale district, front-yard fences may be up to 3 feet tall and side and rear yard fences up to 6 feet, while side-street yard fences may be 3 feet within 3 feet of the lot line or 6 feet when set back 3 feet or more. Chain-link must be vinyl-coated where allowed and is not allowed in front or side-street yards.
Other house-scale districts may have different tables, front heights are measured from the adjacent sidewalk, and whether a fence needs a permit was not confirmed.
Greenville Development Code Div. 19-4.9 Fences and Walls; RH-A district standards · Checked October 10, 2026
Historic review in Greenville preservation overlays
District/overlay only
Within a Greenville Preservation Overlay (-P) district, demolition, new construction, additions, site changes and alterations of exterior architectural features need a Major Historic Certificate of Appropriateness from the Administrator or Historic Review Board before any building permit is issued. All exterior changes must follow that district's design guidelines.
Applies only inside Preservation Overlay districts; which work qualifies for a minor rather than major certificate was not reviewed.
Greenville Development Code Sec. 19-2.10.3 Preservation Overlay (-P) · Checked October 10, 2026
How Greenville compares with nearby cities
Labor rates
For fence installation in Greenville, contractors bill about $37-$47 per worker-hour for fence erectors, whose median pay is $18.25 an hour. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Greenville
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Greenville, SC?
Fence installation cost in Greenville, SC: $2,830-$4,840 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Greenville-Anderson-Greer area compare with the national median?
Median pay for construction laborers in the Greenville-Anderson-Greer, SC metro area is 6% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Greenville County?
NOAA logged 118 thunderstorm wind reports of 58 mph or more in Greenville County from 2016 to 2025.
How much snow does Greenville get in a typical year?
About 3.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Greenville prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- SC Residential Builders Commission (LLR) source
- NOAA Storm Events Database source
- Permit source — Greenville
This estimate is NumeralQ's national baseline with a Greenville adjustment of 0.91×. How we estimate