Siding replacement cost by size
Find your size in the table. In Greenville the range runs from $5,100-$6,460 for 1,000 sq ft of siding to $14,310-$17,840 for 3,000 sq ft of siding; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $5,100-$6,460 |
| 1,500 sq ft of sidingMost common | $7,400-$9,310 |
| 2,000 sq ft of siding | $9,710-$12,150 |
| 2,500 sq ft of siding | $12,010-$15,000 |
| 3,000 sq ft of siding | $14,310-$17,840 |
Installed: Vinyl lap siding
Siding replacement cost by material or type
In Greenville, vinyl lap siding is already the lowest-cost choice, at $7,400-$9,310; stepping up to brick veneer costs about 2.7 times as much ($17,680-$27,210).
| Type | Typical job | Installed |
|---|---|---|
| Vinyl lap sidingMost common | $7,400-$9,310 | $4.60-$5.69 installed |
| Aluminum siding | $8,720-$12,340 | $5.48-$7.71 installed |
| Engineered wood (LP SmartSide type) | $9,400-$14,490 | $5.94-$9.14 installed |
| Insulated vinyl siding | $10,100-$13,340 | $6.40-$8.38 installed |
| Steel siding | $10,710-$15,850 | $6.81-$10.05 installed |
| Fiber cement lap (HardiePlank type) | $11,370-$15,150 | $7.25-$9.59 installed |
| Stucco (3-coat) | $12,070-$16,960 | $7.72-$10.79 installed |
| Vinyl shake or board and batten | $12,340-$14,730 | $7.90-$9.30 installed |
Show 4 more options
| Type | Typical job | Installed |
|---|---|---|
| Cedar lap siding | $13,660-$19,850 | $8.77-$12.71 installed |
| Cedar shingles | $15,010-$21,310 | $9.67-$13.69 installed |
| Manufactured stone veneer | $17,020-$25,190 | $11.01-$16.28 installed |
| Brick veneer | $17,680-$27,210 | $11.45-$17.62 installed |
Materials include waste and contractor markup. Typical job: 1,500 sq ft of siding
What will your Greenville siding job cost?
We have already loaded Greenville prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 5 items your quote includes. The costliest line in Greenville is "Complex trim and corners (whole house)" at $839-$1,370 for the job.
- Remove and haul away old siding$0.99-$1.30 / sq ft
- New soffit$9.33-$13.71 / linear ft
- New fascia or fascia cover$8.06-$10.69 / linear ft
- Seamless aluminum gutters$7.21-$10.49 / linear ft
- Complex trim and corners (whole house)$839-$1,370 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove and haul away old siding | $0.06-$0.09 / sq ft |
| New soffit | $3.16-$5.69 / linear ft |
| New fascia or fascia cover | $1.90-$2.68 / linear ft |
| Seamless aluminum gutters | $1.93-$3.62 / linear ft |
| Complex trim and corners (whole house) | $230-$575 / job |
Installed price per unit
What makes Greenville different for this job
Greenville Siding Replacement Pricing — 2026 Local Market
Siding replacement cost in Greenville, SC: $7,400-$9,310 (typical job: 1,500 sq ft of siding).
What shapes siding work in Greenville
About 42% of homes in Greenville were built before 1980, according to the Census Bureau, against 33% across South Carolina and 50% nationally. On homes built before 1978, federal rules require a lead-safe certified firm when painted surfaces are disturbed, so ask for the firm's EPA certification.
Census new-home data for the South shows brick 26%, then fiber cement 24%, stucco 23% as the leading exteriors.
The area around Greenville logs more large hail per square mile than the U.S. as a whole, per NOAA's storm record, so impact resistance is worth asking about.
| Homes built before 1980 | 42% (South Carolina 33%, U.S. 50%) |
|---|---|
| Lead-safe rule | EPA-certified firm required on pre-1978 homes |
| Top exteriors on new South homes | brick 26%, fiber cement 24%, stucco 23% |
| FEMA hail rating (county) | Relatively Moderate |
| Contractor license (South Carolina) | Residential builder license over $5,000; specialty registration over $500 |
| Where to check a license | SC Residential Builders Commission (LLR) |
Local data checked October 2026 · Sources at the bottom of the page
Greenville homes and the local housing stock
The houses behind Greenville siding jobs
Greenville's median home dates to 1987, about the same as Charleston and Columbia (1988), so siding jobs here deal with houses of ordinary age.
High home values make the siding replacement a small slice in Greenville: about 1.7% of the $487,500 median home, the 23rd lowest among the 147 markets we price.
Most Greenville homes were built in 1987 or later, so original vinyl or fiber cement is common. InterNACHI rates vinyl at about 60 years, so replacements here are often about storm damage or a style change.
Local planning note for Greenville
How Greenville compares with nearby cities
Greenville sits between its neighbors: a typical siding replacement is 1.7% of the median home value here, 3.1% in Columbia and 1.6% in Charleston.
If you're comparing siding replacement bids from Columbia or Charleston with bids from Greenville, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. |
|---|---|---|---|
| Greenville | $8,355 | 1.7% | -17% |
| Columbia | $8,160 | 3.1% | -21% |
| Charleston | $8,385 | 1.6% | -17% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Historic review in Greenville preservation overlays
District/overlay only
Within a Greenville Preservation Overlay (-P) district, demolition, new construction, additions, site changes and alterations of exterior architectural features need a Major Historic Certificate of Appropriateness from the Administrator or Historic Review Board before any building permit is issued. All exterior changes must follow that district's design guidelines.
Applies only inside Preservation Overlay districts; which work qualifies for a minor rather than major certificate was not reviewed.
Greenville Development Code Sec. 19-2.10.3 Preservation Overlay (-P) · Checked October 10, 2026
How Greenville compares with nearby cities
Labor rates
For siding replacement in Greenville, contractors bill about $48-$63 per worker-hour for carpenters, whose median pay is $24.08 an hour. The difference covers insurance, taxes, overhead and profit.
Carpenters
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Greenville
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Contractors per home in Greenville
Contractor competition in Greenville
If you need a siding replacement, Greenville's county, Greenville County, had 15 siding contractors in 2023, according to the Census Bureau. That's 0.6 for every 10,000 homes, above the U.S. rate of 0.6, and the 61st highest of the 135 counties NumeralQ prices.
That's a normal level of competition for Greenville, so a siding replacement quote far above the others is worth questioning.
Frequently Asked Questions
How much does Siding Replacement cost in Greenville, SC?
Siding replacement cost in Greenville, SC: $7,400-$9,310 (typical job: 1,500 sq ft of siding). The table near the top of the page prices each option separately.
How does pay for carpenters in the Greenville-Anderson-Greer area compare with the national median?
Median pay for carpenters in the Greenville-Anderson-Greer, SC metro area is 17% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Greenville County?
NOAA logged 118 thunderstorm wind reports of 58 mph or more in Greenville County from 2016 to 2025.
What climate zone is Greenville in?
Greenville County is in climate zone 3A on the DOE's county list, which energy codes use to set insulation and window levels.
Ready for your own number?
We have already loaded Greenville prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- InterNACHI, Standard Estimated Life Expectancy Chart for Homes, checked 2026-11-10 (https://www.nachi.org/life-expectancy.htm)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- Census new-home survey source
- NOAA Storm Events Database source
- EPA lead-safe rule source
- FEMA National Risk Index source
- SC Residential Builders Commission (LLR) source
- DOE climate zone guide source
We start from a national baseline and adjust it for Greenville (0.91×). How we estimate