Furnace Replacement Cost in Philadelphia, PA: 2026 Local Guide

Typical Philadelphia job · 80,000 BTU furnace
$5,200-$8,550About the U.S. price

Most Philadelphia homeowners pay $5,200-$8,550 for an 80,000 BTU furnace, in line with what the same job costs nationally.

Labor is a big part of any furnace replacement bill, and HVAC technicians in the Philadelphia area earn about 6% more than the U.S. median.

For comparable written proposals, confirm fuel type and equipment capacity, venting and combustion-air scope, duct connections, and startup commissioning.

Your options

Budget
Electric furnace
$3,490-$5,990
Most common
Gas furnace, 95-96% AFUE
$5,200-$8,550
Premium
Gas boiler, hot water (high efficiency)
$7,700-$12,050
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Furnace replacement cost by size

Find your size in the table. In Philadelphia the range runs from $4,770-$7,680 for 40,000 BTU to $5,640-$9,430 for 120,000 BTU; a quote that does not state the measured size is hard to compare.

SizeCost
40,000 BTU$4,770-$7,680
60,000 BTU$4,980-$8,110
80,000 BTUMost common$5,200-$8,550
100,000 BTU$5,420-$8,990
120,000 BTU$5,640-$9,430

Installed: Gas furnace, 95-96% AFUE

Cost by material

Furnace replacement cost by material or type

The gap between options is wide: gas boiler, hot water (high efficiency) costs about 1.4 times as much as gas furnace, 95-96% AFUE in Philadelphia, and electric furnace trims about 31%.

TypeTypical job
Electric furnace$3,490-$5,990
Gas furnace, 80% AFUE (single stage)$4,510-$7,040
Gas furnace, 95-96% AFUEMost common$5,200-$8,550
Propane furnace (95%)$5,630-$9,100
Oil furnace$6,630-$10,520
Gas furnace, 96%+ 2-stage or modulating$7,000-$10,560
Gas boiler, hot water (high efficiency)$7,700-$12,050

Materials include waste and contractor markup. 80,000 BTU furnace

What will your Philadelphia furnace cost?

We have already loaded Philadelphia prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 5 extras are where quotes most often grow. The largest single line in Philadelphia is "Ductwork repairs" at $2,620-$3,680 for the job, so ask whether it is included.

  • New PVC venting (when going 80% to 95%)$421-$1,110 / job
  • Gas line work$331-$964 / job
  • Ductwork repairs$2,620-$3,680 / job
  • Variable-speed blower upgrade$460-$1,120 / job
  • Smart thermostat$278-$511 / each
Show material-only prices
Add-onMaterials
New PVC venting (when going 80% to 95%)$173-$460 / job
Gas line work$115-$402 / job
Ductwork repairs$230-$575 / job
Variable-speed blower upgrade$460-$1,040 / job
Smart thermostat$132-$322 / each

Installed price per unit

Local conditions

What makes Philadelphia different for this job

Philadelphia homes and the local housing stock

A furnace against the value of a Philadelphia home

Who signs the contract matters for furnace swaps: in Philadelphia, 64% of units are single-family houses and 52% of homes are lived in by their owners. Half of Philadelphia's homes were built in 1949 or earlier, in line with the rest of Pennsylvania's covered cities at 1949, which is the starting point for most furnace swaps.

Owners live in 52% of Philadelphia's homes. When you get bids for a furnace replacement, ask each contractor to size the equipment with a Manual J load calculation, as the residential code requires, rather than matching the old unit.

The midpoint price of a furnace replacement works out to about 2.8% of what the median Philadelphia home is worth ($243,100), the 39th highest of the 147 markets NumeralQ covers. Only 38 come out higher.

Philadelphia permit fees for this job

What the permit costs in Philadelphia

Philadelphia treats a furnace replacement as mechanical work, so the permit is the city's HVAC fee, about $138 for a $12,000 replacement under the City of Philadelphia L&I, Construction Permit Fees effective October 1, 2026 (PG_012_INF Rev 7.2026).

Of the 35 cities where NumeralQ could price a standard HVAC replacement permit, Philadelphia's ranks 13th from the top. On a furnace replacement, the fee is about 1.1% of the typical job price on this page.

Next to Allentown and Pittsburgh, a furnace replacement is the lightest lift in Philadelphia relative to home value, at 2.8% of the median home.

If you're comparing furnace replacement bids from Allentown or Pittsburgh with bids from Philadelphia, each city's full price range is on its own page, linked below.

CityTypical job (midpoint)Share of median home valuePay for HVAC technicians vs U.S.Permit for a $12,000 HVAC job
Philadelphia$6,8752.8%+6%$138
Allentown$6,8103.3%+4%Not published
Pittsburgh$6,7703.3%+2%Not published

Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.

HVAC equipment on Philadelphia historic properties

For properties on the Philadelphia Register of Historic Places, Historical Commission review is required to install, alter, repair or replace exterior mechanical equipment and its vents, pipes, conduits and wires on facades and roofs. Seasonal window air conditioners that do not alter the windows are excluded.

Applies only to Register-listed properties; most applications are reviewed by staff, and those staff cannot approve go to a public hearing.

City of Philadelphia: Get approval for work to a historic property · Checked October 10, 2026

When to plan this work in Philadelphia

When to schedule a furnace replacement in Philadelphia

The mildest months in Philadelphia are May and September, when NOAA's normals show the least heating and cooling demand at the Northeast Philadelphia Airport weather station. Planning a furnace replacement for then means a day without heat or air conditioning is no hardship, unlike in January.

January is the heaviest heating month in Philadelphia, with about 955 heating degree days at the Northeast Philadelphia Airport weather station, so an old furnace is most likely to fail then.

Philadelphia Furnace Replacement Pricing — 2026 Local Market

Furnace replacement cost in Philadelphia, PA: $5,200-$8,550 (80,000 BTU furnace).

How hard Philadelphia winters run

NOAA's normals give Philadelphia 4,466 heating degree days a year (against 5,900 at the median Pennsylvania station and 5,483 at the median U.S. station), a measure of how far below 65°F the days run.

Piped gas is the main heat in 70% of Philadelphia homes, per Census data, against 46% nationally.

Pennsylvania's average residential gas price was $15.04 per Mcf in 2025 (EIA), against $15.34 nationally. Local utility rates vary.

The federal floor for a new gas furnace is 80% AFUE. A 90%-plus condensing furnace needs plastic venting and a drain, so ask whether the quote includes that work.

Heating in Philadelphia at a glance
Heating degree days4,466
Nights at or below 32°F88
Gas price, Pennsylvania 2025$15.04 per Mcf (U.S. $15.34)
Federal furnace minimum80% AFUE (non-weatherized gas)
HVAC license (Pennsylvania)Local only (e.g., Philadelphia)
Where to check a licensePennsylvania Office of Attorney General

Local data checked October 2026 · Sources at the bottom of the page

Local risks for this work in Philadelphia

What Philadelphia County's risks mean for the work

Philadelphia sits in Philadelphia County, which carries a Relatively High rating for coastal flooding risk in FEMA's National Risk Index. If the house is in a mapped flood hazard area, a new furnace has to sit at or above the design flood elevation under the residential code, which can mean moving it out of a basement. Check FEMA's flood map for your address.

Nearby pricing

How Philadelphia compares with nearby cities

Labor

Labor rates

On a furnace replacement job in Philadelphia, HVAC technicians earn a median $31.05 an hour. After insurance, payroll taxes and overhead, contractors bill about $62-$81 per worker-hour.

HVAC technicians

$31.05/hrMedian pay
$62-$81/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Philadelphia

Get every quote to include

  • fuel type, equipment model, capacity, and documented sizing basis
  • venting, combustion air, gas or electrical connections, and ductwork
  • removal, startup, commissioning, and safety checks included
  • who checks and documents any required permits or inspections

Contractors per home in Philadelphia

How many HVAC shops work in Philadelphia's area

Census business counts for 2023 show 225 plumbing, heating and air conditioning contractors based in Philadelphia County, the pool most Philadelphia homeowners draw on for a furnace replacement. That's 3.0 per 10,000 homes, 61% below the U.S. rate of 7.7, the 7th lowest among the 135 counties on this site. That count includes plumbers, since the Census groups them with HVAC firms.

Businesses are counted where they're based, and many serve several counties, so a low count doesn't mean no one will come to Philadelphia. It does mean less room to bargain on a furnace replacement.

Common questions

Frequently Asked Questions

How much does Furnace Replacement cost in Philadelphia, PA?

Furnace replacement cost in Philadelphia, PA: $5,200-$8,550 (80,000 BTU furnace). Each option in the price table above has its own range.

How does pay for HVAC technicians in the Philadelphia-Camden-Wilmington area compare with the national median?

Median pay for HVAC technicians in the Philadelphia-Camden-Wilmington, PA-NJ-DE-MD metro area is 6% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

What climate zone is Philadelphia in?

Philadelphia County is in climate zone 4A on the DOE's county list, which energy codes use to set insulation and window levels.

Are federal home energy rebates available in Pennsylvania?

Pennsylvania's federal home electrification rebate program hasn't launched yet, according to NASEO's September 2026 status list.

Ready for your own number?

We have already loaded Philadelphia prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • This Old House cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • https://www.phila.gov/media/20260729134349/PG_012_INF_Summary-of-construction-permit-fees-Eff-1.1.2025-Rev-7.2026.pdf
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • International Code Council, 2021 International Residential Code, Chapter 14: M1401.3 (equipment sized by ACCA Manual S from Manual J loads) (https://codes.iccsafe.org/content/IRC2021P2/chapter-14-heating-and-cooling-equipment-and-appliances)
  • City of Philadelphia L&I, Construction Permit Fees effective October 1, 2026 (PG_012_INF Rev 7.2026). https://www.phila.gov/media/20260729134349/PG_012_INF_Summary-of-construction-permit-fees-Eff-1.1.2025-Rev-7.2026.pdf (retrieved 2026-10-26)
  • NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
  • U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
  • International Code Council, 2021 International Residential Code, Chapter 3: R301.2.1.2 (openings in wind-borne debris regions) and R322 (flood-resistant construction) (https://codes.iccsafe.org/content/IRC2021P2/chapter-3-building-planning)
  • FEMA Flood Map Service Center: flood zone lookup by address (https://msc.fema.gov/portal/home)

We start from a national baseline and adjust it for Philadelphia (1.11×). How we estimate

$5,200-$8,550NumeralQ planning estimate
Get my estimate