Siding replacement cost by size
Find your size in the table. In New York the range runs from $6,370-$8,120 for 1,000 sq ft of siding to $18,040-$22,690 for 3,000 sq ft of siding; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $6,370-$8,120 |
| 1,500 sq ft of sidingMost common | $9,290-$11,760 |
| 2,000 sq ft of siding | $12,210-$15,410 |
| 2,500 sq ft of siding | $15,120-$19,050 |
| 3,000 sq ft of siding | $18,040-$22,690 |
Siding replacement cost by material or type
In New York, vinyl lap siding is already the lowest-cost choice, at $9,290-$11,760; stepping up to brick veneer costs about 2.4 times as much ($20,380-$30,730).
What will your New York siding job cost?
We have already loaded New York prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Albany | $8,310-$10,480 | Albany |
| Buffalo | $8,540-$10,790 | Buffalo |
| New York City | $9,460-$11,980 | New York City |
| Rochester | $8,200-$10,350 | Rochester |
State conditions
Local planning note for New York
New York city by city: what actually changes
For siding jobs, pay for carpenters ranges from 2% below the U.S. median in Rochester to 23% above the U.S. median in New York City, a 24-point gap that shows up most in labor-heavy bids. Permit fees vary more than labor. For the same standard job, Rochester charges about $190 and New York City about $156; Albany and Buffalo do not publish a figure we could price.
FEMA's strong-wind rating runs from Relatively Moderate in Monroe County (Rochester) to Very High in Five boroughs (Bronx, Kings, New York, Queens, Richmond); in the higher-rated counties, ask for the product's wind rating. Home values change how big the bill feels: the typical job is 6.6% of the median home in Rochester but 1.4% in New York City.
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | FEMA strong-wind risk (county) | Typical job as share of median home value |
|---|---|---|---|---|
| Albany | 0% | Not published | Relatively Moderate | 4.0% |
| Buffalo | +5% | Not published | Relatively Moderate | 5.9% |
| New York City | +23% | $156 | Very High | 1.4% |
| Rochester | -2% | $190 | Relatively Moderate | 6.6% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for New York
Sales tax on a siding job in New York
New York charges sales tax on repair, maintenance and installation work, but not on a capital improvement when you give the contractor Form ST-124 (N.Y. Tax Law 1105(c)(5); Pub 862). Whether a siding job counts as a capital improvement or a repair decides the tax, so ask the contractor how they plan to bill it.
Labor rates
On a siding replacement job in New York, carpenters earn a median $34.77 an hour. After insurance, payroll taxes and overhead, contractors bill about $70-$90 per worker-hour.
Before you sign in New York
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Local planning note for New York
Contract and deposit rules in New York
In New York, every home improvement contract must give you until midnight of the third business day after signing to cancel, and money paid before completion must go into a trust account or be covered by a bond (N.Y. Gen. Bus. Law 771; Lien Law 71-a). For a siding job, keep the signed contract, every receipt and the contractor's license or registration number, since a fund claim or complaint depends on them.
Local planning note for New York
Mechanic's liens and lien waivers in New York
A mechanic's lien is a claim against your house by someone who worked on your siding job or supplied material for it and wasn't paid. New York caps a lien at what is earned and unpaid on the contract (Lien Law 4), and payments you make in good faith before a lien is filed are protected (Lien Law 11). On a single-family home, liens are due within 4 months.
Money you pay the contractor is trust money for the subs and suppliers on your job (Lien Law Article 3-A), so ask for proof they were paid before the final check. Siding jobs often use a separate installation crew and a supply account, and either one can send a lien notice.
Frequently Asked Questions
What does siding replacement cost in New York?
They are planning estimates, not contractor bids.
Does pay for carpenters vary across New York?
Yes. Pay for carpenters runs from 2% below the national median in Rochester to 23% above in New York City (BLS, May 2025).
Do siding contractors need a license in New York?
New York's rule is no state license; NYC and several counties license home improvement contractors. The City or county (NYC: DCWP) has a free license lookup.
Does hail damage siding in New York?
It can. NOAA logged 561 reports of one-inch-plus hail in New York from 2016 to 2025. Ask how each siding option handles impact.
Is wind a concern for siding in New York?
It is. NOAA logged 7,773 reports of 58-mph-plus wind in New York from 2016 to 2025. Ask for the siding's wind rating and the fastening pattern it requires.
Does New York's climate affect which siding to choose?
All of New York's counties are in DOE's moist or marine climate zones. Ask about house wrap and a drainage gap behind the siding.
Ready for your own number?
We have already loaded New York prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- New York General Business Law 771, checked November 10, 2026 (https://www.nysenate.gov/legislation/laws/GBS/771)
- New York Publication 862, checked November 10, 2026 (https://www.tax.ny.gov/pdf/publications/sales/pub862.pdf)
- Levelset, New York lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/new-york-lien-law-faqs/)
Installed: Vinyl lap siding