Siding replacement cost by size
Find your size in the table. In Rochester the range runs from $5,640-$7,160 for 1,000 sq ft of siding to $15,890-$19,890 for 3,000 sq ft of siding; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 1,000 sq ft of siding | $5,640-$7,160 |
| 1,500 sq ft of sidingMost common | $8,200-$10,350 |
| 2,000 sq ft of siding | $10,760-$13,530 |
| 2,500 sq ft of siding | $13,330-$16,710 |
| 3,000 sq ft of siding | $15,890-$19,890 |
Installed: Vinyl lap siding
Siding replacement cost by material or type
In Rochester, vinyl lap siding is already the lowest-cost choice, at $8,200-$10,350; stepping up to brick veneer costs about 2.6 times as much ($18,820-$28,690).
| Type | Typical job | Installed |
|---|---|---|
| Vinyl lap sidingMost common | $8,200-$10,350 | $5.12-$6.36 installed |
| Aluminum siding | $9,280-$13,070 | $5.85-$8.18 installed |
| Engineered wood (LP SmartSide type) | $10,410-$15,810 | $6.60-$10.00 installed |
| Insulated vinyl siding | $10,900-$14,390 | $6.93-$9.06 installed |
| Steel siding | $11,390-$16,740 | $7.25-$10.63 installed |
| Fiber cement lap (HardiePlank type) | $12,640-$16,810 | $8.08-$10.67 installed |
| Vinyl shake or board and batten | $12,830-$15,360 | $8.21-$9.71 installed |
| Stucco (3-coat) | $13,550-$18,880 | $8.69-$12.05 installed |
Show 4 more options
| Type | Typical job | Installed |
|---|---|---|
| Cedar lap siding | $14,350-$20,750 | $9.23-$13.30 installed |
| Cedar shingles | $15,770-$22,310 | $10.17-$14.34 installed |
| Manufactured stone veneer | $17,820-$26,240 | $11.54-$16.96 installed |
| Brick veneer | $18,820-$28,690 | $12.20-$18.60 installed |
Materials include waste and contractor markup. Typical job: 1,500 sq ft of siding
What will your Rochester siding job cost?
We have already loaded Rochester prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 5 extras are where quotes most often grow. The largest single line in Rochester is "Complex trim and corners (whole house)" at $954-$1,520 for the job, so ask whether it is included.
- Remove and haul away old siding$1.16-$1.53 / sq ft
- New soffit$10.48-$15.21 / linear ft
- New fascia or fascia cover$9.22-$12.20 / linear ft
- Seamless aluminum gutters$8.20-$11.78 / linear ft
- Complex trim and corners (whole house)$954-$1,520 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Remove and haul away old siding | $0.06-$0.09 / sq ft |
| New soffit | $3.16-$5.69 / linear ft |
| New fascia or fascia cover | $1.90-$2.68 / linear ft |
| Seamless aluminum gutters | $1.93-$3.62 / linear ft |
| Complex trim and corners (whole house) | $230-$575 / job |
Installed price per unit
What makes Rochester different for this job
Rochester homes and the local housing stock
Siding against the value of a Rochester home
Census figures put the median construction year at 1938 in Rochester and 1949 for the other New York cities NumeralQ covers, and house age shapes most siding jobs here.
The midpoint price of a siding replacement works out to about 6.6% of what the median Rochester home is worth ($139,600), the 9th highest of the 147 markets NumeralQ covers. Only 8 come out higher.
With the median Rochester home built in 1938, most houses predate 1978, so removing painted siding falls under EPA's lead-safe work rule. Ask for the firm's certification.
Local planning note for Rochester
Rochester next to Buffalo and Albany
Set against what homes are worth, re-siding a house costs Rochester owners more than their neighbors: 6.6% of the median home value, compared with 4.0% in Albany.
For a siding replacement in Rochester or next door, pay for carpenters is where the three split most: Buffalo is 5% above the U.S. median and Rochester is 2% below the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.
| City | Typical job (midpoint) | Share of median home value | Pay for carpenters vs U.S. | Permit for a $15,000 remodel |
|---|---|---|---|---|
| Rochester | $9,275 | 6.6% | -2% | $190 |
| Buffalo | $9,665 | 5.9% | +5% | Not published |
| Albany | $9,395 | 4.0% | 0% | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Rochester homes and siding
About 87% of homes in Rochester were built before 1980, according to the Census Bureau, against 74% across New York and 50% nationally. On homes built before 1978, federal rules require a lead-safe certified firm when painted surfaces are disturbed, so ask for the firm's EPA certification.
On new homes in the Northeast, the most common exterior is vinyl siding 70%, according to the Census Bureau's new-housing survey.
| Homes built before 1980 | 87% (New York 74%, U.S. 50%) |
|---|---|
| Lead-safe rule | EPA-certified firm required on pre-1978 homes |
| Top exteriors on new Northeast homes | vinyl siding 70%, wood 11%, brick 8% |
| FEMA hail rating (county) | Very Low |
| Contractor license (New York) | No state license; NYC and several counties license home improvement contractors |
| Where to check a license | City or county (NYC: DCWP) |
Local data checked October 2026 · Sources at the bottom of the page
How Rochester compares with nearby cities
Labor rates
For siding replacement in Rochester, contractors bill about $57-$74 per worker-hour for carpenters, whose median pay is $28.60 an hour, 2% below the U.S. median. The difference covers insurance, taxes, overhead and profit.
Carpenters
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Rochester
Get every quote to include
- material, profile, measured area, and finish
- removal, substrate repairs, and water-resistive barrier work
- flashing, trim, penetrations, and disposal
- whether property-specific historic or design review is in scope
Contractors per home in Rochester
Contractor competition in Rochester
Census business counts for 2023 show 41 siding contractors based in Monroe County, the pool most Rochester homeowners draw on for a siding replacement. That's 1.2 per 10,000 homes, 2.2 times the U.S. rate of 0.6, the 27th highest among the 135 counties on this site.
A crowded field helps Rochester homeowners on price and timing for a siding replacement, but it also draws more fly-by-night operators, so check licensing and reviews before you sign. About 76% of the county's siding crews have fewer than five employees, so many are small, owner-run shops.
Frequently Asked Questions
How much does Siding Replacement cost in Rochester, NY?
Siding replacement cost in Rochester, NY: $8,200-$10,350 (typical job: 1,500 sq ft of siding). The table above breaks it out by option.
How does pay for carpenters in the Rochester area compare with the national median?
Median pay for carpenters in the Rochester, NY metro area is 2% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Monroe County?
NOAA logged 125 thunderstorm wind reports of 58 mph or more in Monroe County from 2016 to 2025.
What climate zone is Rochester in?
Monroe County is in climate zone 5A on the DOE's county list, which energy codes use to set insulation and window levels.
Ready for your own number?
We have already loaded Rochester prices for this siding replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://cityofrochester.gov/sites/default/files/2024-10/Fences%20Residential%20-%20Oct.%202024.pdf
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Environmental Protection Agency, Renovation, Repair and Painting Program (lead-safe work in pre-1978 homes) (https://www.epa.gov/lead/renovation-repair-and-painting-program)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- View local evidence & sources →
- Census new-home survey source
- FEMA National Risk Index source
- City or county (NYC: DCWP) source
- NOAA Storm Events Database source
- DOE climate zone guide source
We start from a national baseline and adjust it for Rochester (1.16×). How we estimate