Fence installation cost by size
Find your size in the table. In Rochester the range runs from $660-$1,080 for 25 linear ft to $7,690-$13,030 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $660-$1,080 |
| 50 linear ft | $1,130-$1,870 |
| 100 linear ft | $2,060-$3,470 |
| 150 linear ftMost common | $3,000-$5,060 |
| 200 linear ft | $3,940-$6,660 |
| 300 linear ft | $5,810-$9,840 |
| 400 linear ft | $7,690-$13,030 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
In Rochester, farm wire or electric comes in about 72% under wood privacy, 6 ft pressure-treated, and composite privacy, 6 ft runs roughly 2.0 times the price, so get each option you are weighing priced on the same quote (wood privacy, 6 ft pressure-treated here: $3,000-$5,060).
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $770-$1,470 | $3.90-$7.91 installed |
| Split rail (2-3 rail) | $1,500-$2,210 | $8.71-$12.90 installed |
| Chain link, 4 ft galvanized | $2,430-$3,590 | $14.94-$22.07 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,000-$5,060 | $18.74-$31.88 installed |
| Wood picket, 4 ft | $3,170-$4,500 | $19.85-$28.16 installed |
| Cedar privacy, 6 ft | $3,690-$5,670 | $23.33-$35.92 installed |
| Vinyl privacy, 6 ft | $3,860-$6,240 | $24.49-$39.74 installed |
| Steel ornamental, 4-5 ft | $4,310-$6,580 | $27.45-$41.97 installed |
| Aluminum ornamental, 4-5 ft | $4,540-$6,610 | $29.01-$42.18 installed |
| Composite privacy, 6 ft | $6,370-$9,940 | $41.18-$64.41 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Rochester fence cost?
We have already loaded Rochester prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Not every fence installation job needs these, but ask about each one before you sign. In Rochester, the biggest line is "Drive gate (double)" at $1,330-$3,090 each.
- Walk gate$327-$631 / each
- Drive gate (double)$1,330-$3,090 / each
- Remove old fence$3.91-$5.09 / linear ft
- Sloped or rocky ground (extra per ft)$2.62-$4.38 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Rochester different for this job
Rochester homes and the local housing stock
Who builds fences in Rochester
With 50% of units in multi-unit buildings, a fence in Rochester often needs association approval, and HOA rules can set materials and colors.
Set against the $139,600 median home value, the typical new fence in Rochester comes to roughly 2.9%. Only 7 of 147 markets come out higher, so it is a bigger decision relative to the house than in most cities.
Rochester permit fees for this job
What the permit costs in Rochester
A residential fence permit in Rochester costs $50, per the city's zoning and permitting instructions.
Put another way, the permit adds about 1.3% to a typical new fence in Rochester. Rochester has the 13th lowest fence permit cost of the 31 cities we priced.
Of the three, Rochester is where a new fence takes the biggest bite of a home's value: 2.9% of the median home, against 2.5% in Buffalo and 1.7% in Albany. That's mostly lower home values, not higher prices.
Getting new fence bids from outside Rochester? The Buffalo and Albany pages below show the full price ranges there.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| Rochester | $4,030 | 2.9% | 0% (state figure) | $50 |
| Buffalo | $4,030 | 2.5% | 0% (state figure) | Not published |
| Albany | $4,030 | 1.7% | 0% (state figure) | Not published |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Rochester's climate and fence work
Rochester averages 129 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 148 across New York weather stations and 124 across U.S. stations.
Posts set in ground that freezes can heave, so ask how deep the contractor sets them and whether they go in concrete.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 129 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (New York) | No state license; NYC and several counties license home improvement contractors |
| Where to check a license | City or county (NYC: DCWP) |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for Rochester
Fence rules in Rochester
| Rule | Value |
|---|---|
| Front yard | 4 ft, no chain link, max 60% solid (corner lots: both street sides are front yards) |
| Back and side yard | 6 ft (side/rear) |
| Permit needed | permit for all new fencing (repairs under half of a permitted fence exempt) |
| Survey | survey map required for review |
Preservation districts need extra review
Permits in Rochester
New fences in Rochester need a permit, and so does replacing more than half of an existing permitted fence. The application asks for a survey map, and front-yard fences top out at 4 feet.
How Rochester compares with nearby cities
Labor rates
On a fence installation job in Rochester, fence erectors earn a median $23.08 an hour, about the U.S. median. After insurance, payroll taxes and overhead, contractors bill about $46-$60 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Rochester
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Rochester, NY?
Fence installation cost in Rochester, NY: $3,000-$5,060 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Rochester area compare with the national median?
Median pay for construction laborers in the Rochester, NY metro area is 5% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Monroe County?
NOAA logged 125 thunderstorm wind reports of 58 mph or more in Monroe County from 2016 to 2025.
Ready for your own number?
We have already loaded Rochester prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- https://cityofrochester.gov/sites/default/files/2024-10/Fences%20Residential%20-%20Oct.%202024.pdf
- Rochester - Fences Residential (Oct 2024), checked 2026-10-26 (https://www.cityofrochester.gov/sites/default/files/2024-10/Fences%20Residential%20-%20Oct.%202024.pdf)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- City of Rochester Bureau of Zoning & Permitting, building permit fee table and Residential Fences instructions (Oct. 2024). https://cityofrochester.gov/sites/default/files/2024-10/Fences%20Residential%20-%20Oct.%202024.pdf (retrieved 2026-10-26)
- City of Rochester Bureau of Zoning & Permitting. https://cityofrochester.gov/sites/default/files/2024-11/Interior-exterior%20work%20OCTOBER%202024.pdf (retrieved 2026-10-26)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- City or county (NYC: DCWP) source
- NOAA Storm Events Database source
We start from a national baseline and adjust it for Rochester (1.16×). How we estimate