Furnace replacement cost by size
The biggest driver is size: 40,000 BTU costs $5,290-$8,350 in New York City, while 120,000 BTU costs $6,160-$10,100, about 19% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 40,000 BTU | $5,290-$8,350 |
| 60,000 BTU | $5,500-$8,790 |
| 80,000 BTUMost common | $5,720-$9,230 |
| 100,000 BTU | $5,940-$9,670 |
| 120,000 BTU | $6,160-$10,100 |
Installed: Gas furnace, 95-96% AFUE
Furnace replacement cost by material or type
The gap between options is wide: gas boiler, hot water (high efficiency) costs about 1.4 times as much as gas furnace, 95-96% AFUE in New York City, and electric furnace trims about 29%.
| Type | Typical job |
|---|---|
| Electric furnace | $3,990-$6,640 |
| Gas furnace, 80% AFUE (single stage) | $5,050-$7,750 |
| Gas furnace, 95-96% AFUEMost common | $5,720-$9,230 |
| Propane furnace (95%) | $6,200-$9,850 |
| Oil furnace | $7,170-$11,220 |
| Gas furnace, 96%+ 2-stage or modulating | $7,650-$11,410 |
| Gas boiler, hot water (high efficiency) | $7,910-$12,320 |
Materials include waste and contractor markup. 80,000 BTU furnace
What will your New York City furnace cost?
We have already loaded New York City prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 5 items your quote includes. The costliest line in New York City is "Ductwork repairs" at $3,120-$4,330 for the job.
- New PVC venting (when going 80% to 95%)$473-$1,240 / job
- Gas line work$342-$992 / job
- Ductwork repairs$3,120-$4,330 / job
- Variable-speed blower upgrade$460-$1,130 / job
- Smart thermostat$308-$551 / each
Show material-only prices
| Add-on | Materials |
|---|---|
| New PVC venting (when going 80% to 95%) | $173-$460 / job |
| Gas line work | $115-$402 / job |
| Ductwork repairs | $230-$575 / job |
| Variable-speed blower upgrade | $460-$1,040 / job |
| Smart thermostat | $132-$322 / each |
Installed price per unit
What makes New York City different for this job
New York City homes and the local housing stock
A furnace against the value of a New York City home
For furnace swaps in New York City, start with the age of the house. The median home here dates to 1952; for the other New York cities NumeralQ covers it is 1938.
Fewer than half of New York City units are houses (16%). For a furnace replacement in a condo, the association often controls where outdoor units and vents can go, so check its rules before you sign.
At the midpoint of the range, the furnace replacement equals roughly 1.0% of New York City's $777,600 median home value. 9 markets come out lower, so the price is small next to what homes here are worth.
Local planning note for New York City
New York City, Albany and Rochester side by side
Next to Albany and Rochester, a furnace replacement is the lightest lift in New York City relative to home value, at 1.0% of the median home.
For a furnace replacement in New York City or next door, pay for HVAC technicians is where the three split most: New York City is 28% above the U.S. median and Rochester is 4% above the U.S. median, per BLS. A contractor based in the lower-pay area may quote less for the same work.
| City | Typical job (midpoint) | Share of median home value | Pay for HVAC technicians vs U.S. |
|---|---|---|---|
| New York City | $7,475 | 1.0% | +28% |
| Albany | $6,940 | 3.0% | +8% |
| Rochester | $6,830 | 4.9% | +4% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
How hard New York City winters run
NOAA's normals give New York City 4,376 heating degree days a year (against 7,005 at the median New York station and 5,483 at the median U.S. station), a measure of how far below 65°F the days run.
About 64% of homes in New York City heat with piped gas, according to the Census Bureau (New York: 59%; U.S.: 46%).
New York's average residential gas price was $17.58 per Mcf in 2025 (EIA), against $15.34 nationally. Local utility rates vary.
The federal floor for a new gas furnace is 80% AFUE. A 90%-plus condensing furnace needs plastic venting and a drain, so ask whether the quote includes that work.
| Heating degree days | 4,376 |
|---|---|
| Nights at or below 32°F | 62 |
| Gas price, New York 2025 | $17.58 per Mcf (U.S. $15.34) |
| Federal furnace minimum | 80% AFUE (non-weatherized gas) |
Local data checked October 2026 · Sources at the bottom of the page
Local rules and records for New York City
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
When to plan this work in New York City
When to schedule a furnace replacement in New York City
The mildest months in New York City are May and September, when NOAA's normals show the least heating and cooling demand at the NY City Central Park weather station. Planning a furnace replacement for then means a day without heat or air conditioning is no hardship, unlike in January.
January is the heaviest heating month in New York City, with about 970 heating degree days at the NY City Central Park weather station, so an old furnace is most likely to fail then.
Local risks for this work in New York City
Local risks that change the job in New York City
FEMA's National Risk Index rates Five boroughs (Bronx, Kings, New York, Queens, Richmond), home to New York City, Very High for coastal flooding risk. If the house is in a mapped flood hazard area, a new furnace has to sit at or above the design flood elevation under the residential code, which can mean moving it out of a basement. Check FEMA's flood map for your address.
How New York City compares with nearby cities
Labor rates
On a furnace replacement job in New York City, HVAC technicians earn a median $37.50 an hour. After insurance, payroll taxes and overhead, contractors bill about $75-$98 per worker-hour.
HVAC technicians
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in New York City
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Contractors per home in New York City
Contractor competition in New York City
For replacing a furnace in New York City, the local pool is 216 plumbing, heating and air conditioning contractors in Five boroughs (Bronx, Kings, New York, Queens, Richmond) (Census, 2023): 2.3 per 10,000 homes, 70% below the U.S. rate of 7.7. That count includes plumbers, since the Census groups them with HVAC firms.
Businesses are counted where they're based, and many serve several counties, so a low count doesn't mean no one will come to New York City. It does mean less room to bargain on a furnace replacement.
License check
License check: Licensing for this work is local in New York, so the rules can change from one town to the next.
Frequently Asked Questions
How much does Furnace Replacement cost in New York City, NY?
Furnace replacement cost in New York City, NY: $5,720-$9,230 (80,000 BTU furnace). The table above breaks it out by option.
How does pay for HVAC technicians in the New York-Newark-Jersey City area compare with the national median?
Median pay for HVAC technicians in the New York-Newark-Jersey City, NY-NJ metro area is 28% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
What climate zone is New York City in?
Five boroughs (Bronx, Kings, New York, Queens, Richmond) is in climate zone 4A on the DOE's county list, which energy codes use to set insulation and window levels.
Are federal home energy rebates available in New York?
New York's federal home electrification rebate programed in May 2024, according to NASEO's September 2026 status list. Funding can run out, so check before counting on it.
Ready for your own number?
We have already loaded New York City prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Con Edison, checked 2026-10-26 (https://www.coned.com/en/save-money/rebates-incentives-tax-credits)
- NY utilities / NYSERDA, checked 2026-10-26 (https://cleanheat.ny.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- FEMA National Risk Index, county risk ratings (https://hazards.fema.gov/nri/)
- International Code Council, 2021 International Residential Code, Chapter 3: R301.2.1.2 (openings in wind-borne debris regions) and R322 (flood-resistant construction) (https://codes.iccsafe.org/content/IRC2021P2/chapter-3-building-planning)
- FEMA Flood Map Service Center: flood zone lookup by address (https://msc.fema.gov/portal/home)
- View local evidence & sources →
- NOAA climate normals source
- EIA natural gas prices source
- DOE furnace rules source
- City or county (NYC: DCWP) source
- DOE climate zone guide source
- NASEO source
NumeralQ planning estimate. How we estimate