Furnace replacement cost by size
Size moves the price more than anything else. In Albany, going from 40,000 BTU to 120,000 BTU takes the job from $4,820-$7,750 to $5,690-$9,500, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 40,000 BTU | $4,820-$7,750 |
| 60,000 BTU | $5,040-$8,190 |
| 80,000 BTUMost common | $5,260-$8,620 |
| 100,000 BTU | $5,470-$9,060 |
| 120,000 BTU | $5,690-$9,500 |
Installed: Gas furnace, 95-96% AFUE
Furnace replacement cost by material or type
Material choice is the second big lever in Albany. Electric furnace runs $3,540-$6,060, about 31% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $7,850-$12,240.
| Type | Typical job |
|---|---|
| Electric furnace | $3,540-$6,060 |
| Gas furnace, 80% AFUE (single stage) | $4,570-$7,120 |
| Gas furnace, 95-96% AFUEMost common | $5,260-$8,620 |
| Propane furnace (95%) | $5,690-$9,190 |
| Oil furnace | $6,690-$10,590 |
| Gas furnace, 96%+ 2-stage or modulating | $7,070-$10,650 |
| Gas boiler, hot water (high efficiency) | $7,850-$12,240 |
Materials include waste and contractor markup. 80,000 BTU furnace
What will your Albany furnace cost?
We have already loaded Albany prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 5 extras are where quotes most often grow. The largest single line in Albany is "Ductwork repairs" at $2,680-$3,750 for the job, so ask whether it is included.
- New PVC venting (when going 80% to 95%)$427-$1,120 / job
- Gas line work$338-$983 / job
- Ductwork repairs$2,680-$3,750 / job
- Variable-speed blower upgrade$460-$1,120 / job
- Smart thermostat$281-$516 / each
Show material-only prices
| Add-on | Materials |
|---|---|
| New PVC venting (when going 80% to 95%) | $173-$460 / job |
| Gas line work | $115-$402 / job |
| Ductwork repairs | $230-$575 / job |
| Variable-speed blower upgrade | $460-$1,040 / job |
| Smart thermostat | $132-$322 / each |
Installed price per unit
What makes Albany different for this job
Albany homes and the local housing stock
Albany homes and their furnaces
Albany furnace swaps happen in homes newer than those in the rest of New York's covered cities: half were built in 1949 or earlier, against 1938 there.
With 67% of units in multi-unit buildings, many Albany homes that need a furnace replacement are condos or apartments, where an association may set equipment locations and approve the contractor.
The midpoint price of a furnace replacement works out to about 3.0% of what the median Albany home is worth ($234,700), the 34th highest of the 147 markets NumeralQ covers. Only 33 come out higher.
Local planning note for Albany
How Albany compares with nearby cities
Albany sits between its neighbors: a typical furnace replacement is 3.0% of the median home value here, 4.9% in Rochester and 1.0% in New York City.
Comparing Albany with its neighbors, BLS puts HVAC technicians' median pay 28% above the U.S. median in New York City but 4% above the U.S. median in Rochester, a gap that tends to show up in furnace replacement quotes.
| City | Typical job (midpoint) | Share of median home value | Pay for HVAC technicians vs U.S. |
|---|---|---|---|
| Albany | $6,940 | 3.0% | +8% |
| New York City | $7,475 | 1.0% | +28% |
| Rochester | $6,830 | 4.9% | +4% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
Local rules and records for Albany
Rebates from your utility
Program pages from the utility. Amounts change often, so check the program page.
Furnace facts for Albany
Albany averages 6,357 heating degree days a year, according to NOAA's 1991–2020 normals, compared with medians of 7,005 across New York weather stations and 5,483 across U.S. stations. The higher the number, the more a furnace runs.
Piped gas is the main heat in 62% of Albany homes, per Census data, against 46% nationally.
Homes in New York paid an average $17.58 per thousand cubic feet of gas in 2025, above the U.S. average of $15.34, according to EIA. That's a statewide figure; your utility's rate may differ.
Federal rules set an 80% AFUE minimum for new non-weatherized gas furnaces; condensing models run 90% and up and need PVC venting and a condensate drain.
| Heating degree days | 6,357 |
|---|---|
| Nights at or below 32°F | 136 |
| Gas price, New York 2025 | $17.58 per Mcf (U.S. $15.34) |
| Federal furnace minimum | 80% AFUE (non-weatherized gas) |
| HVAC license (New York) | Local only |
| Where to check a license | City or county (NYC: DCWP) |
Local data checked October 2026 · Sources at the bottom of the page
When to plan this work in Albany
When to schedule a furnace replacement in Albany
The mildest months in Albany are June and September, when NOAA's normals show the least heating and cooling demand at the Albany International Airport weather station. Planning a furnace replacement for then means a day without heat or air conditioning is no hardship, unlike in January.
January is the heaviest heating month in Albany, with about 1,260 heating degree days at the Albany International Airport weather station, so an old furnace is most likely to fail then.
How Albany compares with nearby cities
Labor rates
On a furnace replacement job in Albany, HVAC technicians earn a median $31.75 an hour. After insurance, payroll taxes and overhead, contractors bill about $64-$83 per worker-hour.
HVAC technicians
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Albany
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Contractors per home in Albany
How many HVAC shops work in Albany's area
For replacing a furnace in Albany, the local pool is 98 plumbing, heating and air conditioning contractors in Albany County (Census, 2023): 6.6 per 10,000 homes, 14% below the U.S. rate of 7.7. That count includes plumbers, since the Census groups them with HVAC firms.
That's a normal level of competition for Albany, so a furnace replacement quote far above the others is worth questioning.
Frequently Asked Questions
How much does Furnace Replacement cost in Albany, NY?
Furnace replacement cost in Albany, NY: $5,260-$8,620 (80,000 BTU furnace). Each option in the price table above has its own range.
How does pay for HVAC technicians in the Albany-Schenectady-Troy area compare with the national median?
Median pay for HVAC technicians in the Albany-Schenectady-Troy, NY metro area is 8% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
What climate zone is Albany in?
Albany County is in climate zone 5A on the DOE's county list, which energy codes use to set insulation and window levels.
Are federal home energy rebates available in New York?
New York's federal home electrification rebate programed in May 2024, according to NASEO's September 2026 status list. Funding can run out, so check before counting on it.
Ready for your own number?
We have already loaded Albany prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- NY utilities / NYSERDA, checked 2026-10-26 (https://cleanheat.ny.gov/)
- National Grid NY, checked 2026-10-26 (https://www.nationalgridus.com/Upstate-NY-Home/Energy-Saving-Programs/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- View local evidence & sources →
- NOAA climate normals source
- EIA natural gas prices source
- DOE furnace rules source
- City or county (NYC: DCWP) source
- DOE climate zone guide source
- NASEO source
This estimate is NumeralQ's national baseline with a Albany adjustment of 1.18×. How we estimate