Deck or patio cost by size
Find your size in the table. In New York the range runs from $1,850-$2,560 for 10 x 10 ft to $11,100-$15,340 for 20 x 30 ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,850-$2,560 |
| 12 x 12 ft | $2,660-$3,680 |
| 12 x 16 ft | $3,550-$4,910 |
| 16 x 16 ft | $4,740-$6,550 |
| 16 x 20 ftMost common | $5,920-$8,180 |
| 20 x 20 ft | $7,400-$10,230 |
| 20 x 30 ft | $11,100-$15,340 |
Deck or patio cost by material or type
The gap between options is wide: deck: ipe hardwood costs about 2.3 times as much as deck: pressure-treated wood in New York, and patio: plain concrete trims about 56%.
What will your New York deck or patio cost?
We have already loaded New York prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Albany | $5,360-$7,460 | Albany |
| Buffalo | $5,500-$7,630 | Buffalo |
| New York City | $6,020-$8,310 | New York City |
| Rochester | $5,300-$7,380 | Rochester |
State conditions
Local planning note for New York
New York city by city: what actually changes
For decks and patios, pay for carpenters ranges from 2% below the U.S. median in Rochester to 23% above the U.S. median in New York City, a 24-point gap that shows up most in labor-heavy bids. The permit ranges from about $156 in New York City to $190 in Rochester for the same job, each read from the city's own schedule.
Frost matters for footings: Albany averages 136 freezing nights a year and New York City 67, per NOAA normals. Next to what homes are worth, Rochester is the most expensive place in New York to do this job (4.5% of the median home value) and New York City the least (0.9%).
| City | Pay for carpenters vs U.S. | Remodel permit ($15,000 job) | Nights at or below 32°F a year | Typical job as share of median home value |
|---|---|---|---|---|
| Albany | 0% | Not published | 136 | 2.7% |
| Buffalo | +5% | Not published | 124 | 4.0% |
| New York City | +23% | $156 | 67 | 0.9% |
| Rochester | -2% | $190 | 129 | 4.5% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Local planning note for New York
Sales tax on a deck or patio in New York
New York charges sales tax on repair, maintenance and installation work, but not on a capital improvement when you give the contractor Form ST-124 (N.Y. Tax Law 1105(c)(5); Pub 862). Whether a deck or patio counts as a capital improvement or a repair decides the tax, so ask the contractor how they plan to bill it.
Labor rates
On a deck or patio job in New York, carpenters earn a median $34.77 an hour. After insurance, payroll taxes and overhead, contractors bill about $70-$90 per worker-hour.
Before you sign in New York
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Local planning note for New York
Contract and deposit rules in New York
In New York, every home improvement contract must give you until midnight of the third business day after signing to cancel, and money paid before completion must go into a trust account or be covered by a bond (N.Y. Gen. Bus. Law 771; Lien Law 71-a). Whatever the size of your deck or patio, pay by check or card rather than cash so each payment can be proved later.
Local planning note for New York
Protecting your New York home from contractor liens
Anyone who works on a deck or patio or supplies material for it, and isn't paid, may be able to file a mechanic's lien against the house. New York caps a lien at what is earned and unpaid on the contract (Lien Law 4), and payments you make in good faith before a lien is filed are protected (Lien Law 11). On a single-family home, liens are due within 4 months.
Money you pay the contractor is trust money for the subs and suppliers on your job (Lien Law Article 3-A), so ask for proof they were paid before the final check. On a deck or patio, the lumber yard or concrete supplier that sold to your contractor on credit is the party most likely to send a lien notice.
Frequently Asked Questions
What does a deck or patio cost in New York?
They are planning estimates, not contractor bids.
Does pay for carpenters vary across New York?
Yes. Pay for carpenters runs from 2% below the national median in Rochester to 23% above in New York City (BLS, May 2025).
Do deck builders need a license in New York?
Yes: no state license; NYC and several counties license home improvement contractors. You can confirm a license is active through the City or county (NYC: DCWP).
Does New York's climate affect deck materials?
All of New York's counties are in DOE's moist or marine climate zones. Use ground-contact treated lumber for posts and leave gaps for drainage.
Can a new deck attach to an older New York home?
Usually, but the inspector will check the rim joist the ledger bolts into. That matters here, where 74% of homes were built before 1980 (Census).
Does frost limit when a deck can be built in New York?
It can. Concrete footings shouldn't be poured into frozen ground, and 87% of New York's counties are in climate zone 5 or colder (DOE). Ask your builder how winter affects their schedule.
Ready for your own number?
We have already loaded New York prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, nights at or below 32°F (https://www.ncei.noaa.gov/products/land-based-station/us-climate-normals)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- New York General Business Law 771, checked November 10, 2026 (https://www.nysenate.gov/legislation/laws/GBS/771)
- New York Publication 862, checked November 10, 2026 (https://www.tax.ny.gov/pdf/publications/sales/pub862.pdf)
- Levelset, New York lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/new-york-lien-law-faqs/)
Installed: Deck: pressure-treated wood