Fence installation cost by size
Size moves the price more than anything else. In Albuquerque, going from 25 linear ft to 400 linear ft takes the job from $640-$1,050 to $7,540-$12,850, so have the size measured before comparing quotes.
| Size | Cost |
|---|---|
| 25 linear ft | $640-$1,050 |
| 50 linear ft | $1,100-$1,840 |
| 100 linear ft | $2,020-$3,410 |
| 150 linear ftMost common | $2,940-$4,980 |
| 200 linear ft | $3,860-$6,560 |
| 300 linear ft | $5,700-$9,700 |
| 400 linear ft | $7,540-$12,850 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
The gap between options is wide: composite privacy, 6 ft costs about 2.0 times as much as wood privacy, 6 ft pressure-treated in Albuquerque, and farm wire or electric trims about 73%.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $730-$1,410 | $3.66-$7.59 installed |
| Split rail (2-3 rail) | $1,440-$2,140 | $8.42-$12.52 installed |
| Chain link, 4 ft galvanized | $2,330-$3,470 | $14.37-$21.33 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $2,940-$4,980 | $18.41-$31.45 installed |
| Wood picket, 4 ft | $3,030-$4,330 | $19.02-$27.09 installed |
| Cedar privacy, 6 ft | $3,630-$5,590 | $22.98-$35.46 installed |
| Vinyl privacy, 6 ft | $3,800-$6,160 | $24.15-$39.30 installed |
| Steel ornamental, 4-5 ft | $4,210-$6,440 | $26.85-$41.19 installed |
| Aluminum ornamental, 4-5 ft | $4,490-$6,540 | $28.74-$41.83 installed |
| Composite privacy, 6 ft | $6,300-$9,860 | $40.82-$63.93 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Albuquerque fence cost?
We have already loaded Albuquerque prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 4 extras are where quotes most often grow. The largest single line in Albuquerque is "Drive gate (double)" at $1,270-$3,020 each, so ask whether it is included.
- Walk gate$310-$609 / each
- Drive gate (double)$1,270-$3,020 / each
- Remove old fence$3.62-$4.71 / linear ft
- Sloped or rocky ground (extra per ft)$2.47-$4.19 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Albuquerque different for this job
Albuquerque homes and the local housing stock
A fence against the value of an Albuquerque home
68% of Albuquerque units are houses with their own lots, and 62% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.
The midpoint of the range above is about 1.4% of Albuquerque's $291,500 median home value, the 60th highest share for a new fence among 147 markets and near the middle of the pack.
Exterior work in Albuquerque historic overlay zones
District/overlay only
Within Albuquerque's Historic Protection Overlay zones (East Downtown, East End Addition, Eighth and Forrester, Fourth Ward, Huning Highland, Old Town and Silver Hill), a Certificate of Appropriateness is required before exterior alterations, including roof and window work, building a fence and changing exterior materials. In-kind repair identical in design, size, texture, color and material is exempt, but that exemption does not include replacing roofing, windows or doors.
Applies only inside these overlay zones; each zone has its own design guidelines, and building permits may still be required.
City of Albuquerque: Historic Protection Overlay Zones · Checked October 9, 2026
Albuquerque Fence Installation Pricing — 2026 Local Market
Fence installation cost in Albuquerque, NM: $2,940-$4,980 (typical job: 150 linear ft).
Before you fence in Albuquerque
NOAA's climate normals count about 93 freezing nights a year in Albuquerque, against 140 at the median New Mexico station and 124 at the median U.S. station.
In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.
The model residential code doesn't require a building permit for fences up to 7 feet tall, but city zoning still sets height and placement limits.
Call 811 a few days before digging so buried utility lines get marked; it's free.
| Nights at or below 32°F | 93 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (New Mexico) | Construction Industries Division license (GB-2 residential) |
| Where to check a license | NM Regulation and Licensing Department, CID |
Local data checked October 2026 · Sources at the bottom of the page
Front-yard wall and fence height in Albuquerque
City rule
For low-density residential lots in or next to a Residential zone in Albuquerque, front and street-side yard walls are limited to 3 feet unless the Zoning Hearing Examiner approves a major wall or fence permit after neighbor notice. Approval requires that the lot be at least half an acre, front a collector, arterial or interstate, or that at least 20 percent of comparable lots within 330 feet along the street already have front-yard walls over 3 feet.
This rule was captured as quoted in a 2025 Zoning Hearing Examiner decision, not from the current zoning code text; confirm with Albuquerque Planning.
City of Albuquerque Integrated Development Ordinance, as quoted in Zoning Hearing Examiner decision VA-2024-00329 · Checked October 9, 2026
Labor rates
On a fence installation job in Albuquerque, fence erectors earn a median $21.37 an hour. After insurance, payroll taxes and overhead, contractors bill about $43-$56 per worker-hour.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Albuquerque
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Frequently Asked Questions
How much does Fence Installation cost in Albuquerque, NM?
Fence installation cost in Albuquerque, NM: $2,940-$4,980 (typical job: 150 linear ft). The table near the top of the page prices each option separately.
How does pay for construction laborers in the Albuquerque area compare with the national median?
Median pay for construction laborers in the Albuquerque, NM metro area is 14% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Bernalillo County?
NOAA logged 41 thunderstorm wind reports of 58 mph or more in Bernalillo County from 2016 to 2025.
How much snow does Albuquerque get in a typical year?
About 7.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Albuquerque prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NOAA climate normals source
- International Residential Code source
- 811 call before you dig source
- NM Regulation and Licensing Department, CID source
- NOAA Storm Events Database source
NumeralQ planning estimate. How we estimate