Deck or patio cost by size
The biggest driver is size: 10 x 10 ft costs $1,670-$2,320 in Albuquerque, while 20 x 30 ft costs $10,000-$13,900, about 499% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 10 x 10 ft | $1,670-$2,320 |
| 12 x 12 ft | $2,400-$3,340 |
| 12 x 16 ft | $3,200-$4,450 |
| 16 x 16 ft | $4,260-$5,930 |
| 16 x 20 ftMost common | $5,330-$7,420 |
| 20 x 20 ft | $6,660-$9,270 |
| 20 x 30 ft | $10,000-$13,900 |
Installed: Deck: pressure-treated wood
Deck or patio cost by material or type
The gap between options is wide: deck: ipe hardwood costs about 2.3 times as much as deck: pressure-treated wood in Albuquerque, and patio: plain concrete trims about 58%.
| Type | Typical job | Installed |
|---|---|---|
| Patio: plain concrete | $2,310-$3,070 | $7.22-$9.61 installed |
| Patio: gravel | $2,580-$3,640 | $8.06-$11.36 installed |
| Patio: brick pavers | $4,010-$5,560 | $12.54-$17.37 installed |
| Patio: stamped concrete | $4,060-$5,430 | $12.69-$16.97 installed |
| Patio: concrete pavers | $4,350-$6,040 | $13.59-$18.87 installed |
| Patio: flagstone | $4,670-$11,930 | $14.59-$37.29 installed |
| Patio: slate | $5,310-$8,610 | $16.61-$26.90 installed |
| Deck: pressure-treated woodMost common | $5,330-$7,420 | $16.66-$23.17 installed |
Show 9 more options
| Type | Typical job | Installed |
|---|---|---|
| Patio: porcelain pavers | $5,370-$8,400 | $16.80-$26.26 installed |
| Patio: travertine pavers | $5,840-$7,840 | $18.26-$24.50 installed |
| Patio: bluestone | $6,110-$9,930 | $19.10-$31.03 installed |
| Deck: cedar | $6,370-$9,340 | $19.91-$29.17 installed |
| Deck: redwood | $8,710-$12,010 | $27.22-$37.54 installed |
| Deck: composite | $9,620-$14,070 | $30.06-$43.95 installed |
| Deck: aluminum | $9,960-$13,180 | $31.12-$41.20 installed |
| Deck: PVC | $10,440-$13,860 | $32.62-$43.30 installed |
| Deck: ipe hardwood | $12,260-$17,670 | $38.32-$55.22 installed |
Materials include waste and contractor markup. Typical job: 320 sq ft
What will your Albuquerque deck or patio cost?
We have already loaded Albuquerque prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
These 8 extras are where quotes most often grow. The largest single line in Albuquerque is "Pergola or cover structure" at $4,420-$8,100 for the job, so ask whether it is included.
- Railing: wood$34.08-$46.72 / linear ft
- Railing: aluminum or steel$49.80-$85.88 / linear ft
- Railing: composite$93-$163 / linear ft
- Railing: cable$111-$185 / linear ft
- Railing: glass$133-$228 / linear ft
- Stairs (per step, wood, pre-cut stringers)$109-$188 / step
- Footing (poured concrete)$205-$365 / each
- Pergola or cover structure$4,420-$8,100 / job
Show material-only prices
| Add-on | Materials |
|---|---|
| Railing: wood | $12.07-$18.11 / linear ft |
| Railing: aluminum or steel | $30.19-$60.38 / linear ft |
| Railing: composite | $60-$121 / linear ft |
| Railing: cable | $85-$151 / linear ft |
| Railing: glass | $97-$181 / linear ft |
| Stairs (per step, wood, pre-cut stringers) | $33.81-$90.56 / step |
| Footing (poured concrete) | $57-$173 / each |
| Pergola or cover structure | $1,720-$4,600 / job |
Installed price per unit
What makes Albuquerque different for this job
Albuquerque homes and the local housing stock
A deck against the value of an Albuquerque home
68% of Albuquerque units are houses with their own lots, and 62% of homes are owner-occupied, so a deck is usually the owner's call, subject to HOA rules where they apply.
The midpoint of the range above is about 2.2% of Albuquerque's $291,500 median home value, the 55th highest share for a deck or patio among 147 markets and near the middle of the pack.
Albuquerque Deck & Patio Pricing — 2026 Local Market
Deck or patio cost in Albuquerque, NM: $5,330-$7,420 (typical job: 320 sq ft).
Deck footings and permits in Albuquerque
NOAA's climate normals count about 93 freezing nights a year in Albuquerque, against 140 at the median New Mexico station and 124 at the median U.S. station.
The residential code puts deck footings at least 12 inches into undisturbed soil and below the local frost line; the building department sets that depth for Albuquerque.
The model code exempts only small, low, freestanding decks (under 200 sq ft, under 30 inches high, not attached) from a permit; an attached deck needs one in most places.
The station also averages 8.8 inches of rain and melted snow a year (U.S. median: 37.5).
| Nights at or below 32°F | 93 |
|---|---|
| Yearly precipitation | 8.8 in |
| Climate zone (county) | 4B |
| Contractor license (New Mexico) | Construction Industries Division license (GB-2 residential) |
| Where to check a license | NM Regulation and Licensing Department, CID |
Local data checked October 2026 · Sources at the bottom of the page
Deck and patio cover setbacks in Albuquerque
City rule
In Albuquerque, decks, patios and terraces less than 18 inches above the average lot grade may extend into a required setback, but those above grade may come no closer than 3 feet to any lot line. For low-density residential lots, shade structures such as patio covers may extend into a side or rear setback but no closer than 3 feet to a lot line, and no more than 50 percent of the rear yard may be covered by a roof.
This allowance does not cover decks 18 inches or more above grade; check the zone's setbacks with the city for those.
Albuquerque Integrated Development Ordinance Table 5-1-4 · Checked October 10, 2026
Labor rates
For deck or patio in Albuquerque, contractors bill about $58-$75 per worker-hour for carpenters, whose median pay is $28.89 an hour, 1% below the U.S. median. The difference covers insurance, taxes, overhead and profit.
Carpenters
Cement Masons and Concrete Finishers
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Albuquerque
Get every quote to include
- measured dimensions, height, stairs, and guard or rail scope
- footings, attachment details, and framing materials
- decking or patio surface, demolition, and disposal
- grading, drainage, access, and site restoration
Frequently Asked Questions
How much does Deck & Patio cost in Albuquerque, NM?
Deck or patio cost in Albuquerque, NM: $5,330-$7,420 (typical job: 320 sq ft). The table above breaks it out by option.
How does pay for carpenters in the Albuquerque area compare with the national median?
Median pay for carpenters in the Albuquerque, NM metro area is 1% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Bernalillo County?
NOAA logged 41 thunderstorm wind reports of 58 mph or more in Bernalillo County from 2016 to 2025.
How much snow does Albuquerque get in a typical year?
About 7.9 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Albuquerque prices for this deck or patio estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NOAA climate normals source
- International Residential Code source
- DOE climate zone guide source
- NM Regulation and Licensing Department, CID source
- NOAA Storm Events Database source
This estimate is NumeralQ's national baseline with a Albuquerque adjustment of 0.94×. How we estimate