Fence Installation Cost in Gulfport, MS: 2026 Local Guide

Typical Gulfport job · 150 linear ft
$2,840-$4,8604% below U.S.

In Gulfport, 150 linear ft of new fence usually costs $2,840-$4,860, 4% under the U.S. figure.

For comparable written proposals, confirm fence length and height, material and gates, post and footing details, property lines, and site grading.

Your options

Budget
Farm wire or electric
$650-$1,310
Most common
Wood privacy, 6 ft pressure-treated
$2,840-$4,860
Premium
Composite privacy, 6 ft
$6,200-$9,720
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Fence installation cost by size

The biggest driver is size: 25 linear ft costs $610-$1,010 in Gulfport, while 400 linear ft costs $7,310-$12,550, about 1126% more. Ask every contractor to quote the same measured size.

SizeCost
25 linear ft$610-$1,010
50 linear ft$1,060-$1,780
100 linear ft$1,950-$3,320
150 linear ftMost common$2,840-$4,860
200 linear ft$3,740-$6,400
300 linear ft$5,530-$9,470
400 linear ft$7,310-$12,550

Installed: Wood privacy, 6 ft pressure-treated

Cost by material

Fence installation cost by material or type

The gap between options is wide: composite privacy, 6 ft costs about 2.1 times as much as wood privacy, 6 ft pressure-treated in Gulfport, and farm wire or electric trims about 75%.

TypeTypical jobInstalled
Farm wire or electric$650-$1,310$3.26-$7.08 installed
Split rail (2-3 rail)$1,360-$2,030$7.96-$11.92 installed
Chain link, 4 ft galvanized$2,180-$3,270$13.45-$20.14 installed
Wood picket, 4 ft$2,810-$4,050$17.69-$25.35 installed
Wood privacy, 6 ft pressure-treatedMost common$2,840-$4,860$17.88-$30.76 installed
Cedar privacy, 6 ft$3,520-$5,460$22.42-$34.73 installed
Vinyl privacy, 6 ft$3,700-$6,030$23.60-$38.59 installed
Steel ornamental, 4-5 ft$4,040-$6,230$25.88-$39.92 installed
Aluminum ornamental, 4-5 ft$4,410-$6,430$28.30-$41.26 installed
Composite privacy, 6 ft$6,200-$9,720$40.22-$63.16 installed

Materials include waste and contractor markup. Typical job: 150 linear ft

What will your Gulfport fence cost?

We have already loaded Gulfport prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

These 4 extras are where quotes most often grow. The largest single line in Gulfport is "Drive gate (double)" at $1,180-$2,900 each, so ask whether it is included.

  • Walk gate$284-$575 / each
  • Drive gate (double)$1,180-$2,900 / each
  • Remove old fence$3.16-$4.10 / linear ft
  • Sloped or rocky ground (extra per ft)$2.22-$3.87 / linear ft
Show material-only prices
Add-onMaterials
Walk gate$107-$345 / each
Drive gate (double)$575-$2,120 / each
Sloped or rocky ground (extra per ft)$0.57-$1.72 / linear ft

Installed price per unit

Local conditions

What makes Gulfport different for this job

Gulfport homes and the local housing stock

Who builds fences in Gulfport

68% of Gulfport units are houses with their own lots, and 55% of homes are owner-occupied, so a fence is usually the owner's call, subject to HOA rules where they apply.

At the midpoint of the range above, a typical new fence costs about 2.2% of Gulfport's $174,600 median home value, the 17th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.

Before you fence in Gulfport

NOAA's climate normals count about 16 freezing nights a year in Gulfport, compared with medians of 50 across Mississippi weather stations and 124 across U.S. stations.

Freezing is rare here, so post depth is mostly about soil and fence height; ask how deep the posts go.

Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.

Before any post holes go in, 811 will mark buried utility lines for free.

Fences in Gulfport at a glance
Nights at or below 32°F16
Building permit (model code)Not required up to 7 ft; zoning limits apply
Before you digCall 811
Contractor license (Mississippi)State Board of Contractors license for remodels over $10,000
Where to check a licenseMississippi State Board of Contractors

Local data checked October 2026 · Sources at the bottom of the page

Fence height and material rules in Gulfport

In Gulfport, residential fences may be up to 6 feet behind the front facade line, with a decorative top that is at least 50 percent see-through allowed up to 8 feet, and up to 4 feet in front of the facade line. Barbed and razor wire are prohibited in residential districts, and wire fences other than chain link, such as chicken wire, are banned. Wood fences visible from the street must have the slats on the outside of the framing.

Fences may cross drainage easements only if water flow and the easement holder's access, such as through gates, are kept.

Gulfport Code Sec. 3-245 (property maintenance amendments); Zoning Appendix A, Sec. IV · Checked October 10, 2026

Nearby pricing

How Gulfport compares with nearby cities

Labor

Labor rates

For fence installation in Gulfport, contractors bill about $37-$48 per worker-hour for fence erectors, whose median pay is $18.61 an hour. The difference covers insurance, taxes, overhead and profit.

Fence Erectors

$18.61/hrMedian pay
$37-$48/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Gulfport

Get every quote to include

  • measured length, height, material, gates, and hardware
  • post spacing, footing details, slope, and removal of an old fence
  • property-line assumptions, utility checks, and access
  • whether any parcel-specific overlay or permit check is included
Common questions

Frequently Asked Questions

How much does Fence Installation cost in Gulfport, MS?

Fence installation cost in Gulfport, MS: $2,840-$4,860 (typical job: 150 linear ft). Each option in the price table above has its own range.

How does pay for construction laborers in the Gulfport-Biloxi area compare with the national median?

Median pay for construction laborers in the Gulfport-Biloxi, MS metro area is 18% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How often does damaging wind hit Harrison County?

NOAA logged 53 thunderstorm wind reports of 58 mph or more in Harrison County from 2016 to 2025.

Ready for your own number?

We have already loaded Gulfport prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • Thumbtack cost guide, retrieved 2026-10-26
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)

NumeralQ planning estimate. How we estimate

$2,840-$4,860NumeralQ planning estimate
Get my estimate