Concrete Driveway Cost in Gulfport, MS: 2026 Local Guide

Typical Gulfport job · 576 sq ft
$3,520-$4,85020% below U.S.

Plan on $3,520-$4,850 for a 576 sq ft concrete driveway in Gulfport, 20% below the national typical job.

For comparable written proposals, confirm measured area and thickness, excavation and subbase, reinforcement, drainage, and removal or frontage work.

Your options

Budget
Resurfacing overlay (on sound old slab)
$2,170-$3,430
Most common
Plain gray concrete, broom finish
$3,520-$4,850
Premium
Stained or saw-cut patterns
$6,850-$9,520
  • Local labor and material prices
  • 147 U.S. markets
  • Free, no sign-up to see your range
Cost by size

Concrete driveway cost by size

Size moves the price more than anything else. In Gulfport, going from 10 x 20 ft (1 car, short) to 10 x 100 ft (long single) takes the job from $1,480-$2,140 to $5,810-$7,920, so have the size measured before comparing quotes.

SizeCost
10 x 20 ft (1 car, short)$1,480-$2,140
12 x 24 ft (1 car)$1,960-$2,770
20 x 20 ft (2 car, short)$2,560-$3,580
24 x 24 ft (2 car)Most common$3,520-$4,850
24 x 36 ft (3 car)$5,080-$6,940
10 x 100 ft (long single)$5,810-$7,920

Installed: Plain gray concrete, broom finish

Cost by material

Concrete driveway cost by material or type

Material choice is the second big lever in Gulfport. Resurfacing overlay (on sound old slab) runs $2,170-$3,430, about 33% under plain gray concrete, broom finish, while stained or saw-cut patterns costs $6,850-$9,520.

TypeTypical jobInstalled
Gravel (for comparison)$1,380-$2,340$1.70-$2.87 installed
Resurfacing overlay (on sound old slab)$2,170-$3,430$3.08-$4.76 installed
Asphalt (for comparison)$2,640-$3,990$3.89-$5.72 installed
Plain gray concrete, broom finishMost common$3,520-$4,850$5.42-$7.23 installed
Swirl or trowel finish$3,680-$5,070$5.71-$7.61 installed
Rock salt finish$3,860-$5,350$6.01-$8.09 installed
Exposed aggregate$4,260-$5,880$6.71-$9.01 installed
Colored concrete$4,290-$5,960$6.76-$9.16 installed
Show 5 more options
TypeTypical jobInstalled
Broom finish with stamped border$4,400-$6,150$6.95-$9.47 installed
Pervious (porous) concrete$5,080-$7,200$8.14-$11.29 installed
Stamped concrete$6,010-$8,280$9.75-$13.17 installed
Stained or saw-cut patterns$6,850-$9,520$11.21-$15.32 installed
Pavers (for comparison)$7,120-$10,120$11.67-$16.37 installed

Materials include waste and contractor markup. Typical job: 576 sq ft

What will your Gulfport driveway cost?

We have already loaded Gulfport prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Project extras

Add-ons and extra work

Check which of these 7 items your quote includes. The costliest line in Gulfport is "Apron / curb cut" at $586-$998 for the job.

  • Remove old driveway$1.82-$2.61 / sq ft
  • Rebar grid (instead of mesh)$0.89-$2.09 / sq ft
  • Fiber reinforcement$0.36-$0.55 / sq ft
  • 6 in. slab instead of 4 in.$1.11-$1.49 / sq ft
  • Apron / curb cut$586-$998 / job
  • Heated driveway (hydronic or electric)$13.90-$22.90 / sq ft
  • Sealer$0.29-$0.41 / sq ft
Show material-only prices
Add-onMaterials
Remove old driveway$0.34-$0.69 / sq ft
Rebar grid (instead of mesh)$0.52-$1.61 / sq ft
Fiber reinforcement$0.11-$0.23 / sq ft
6 in. slab instead of 4 in.$0.92-$1.24 / sq ft
Apron / curb cut$173-$460 / job
Heated driveway (hydronic or electric)$6.90-$13.80 / sq ft
Sealer$0.11-$0.18 / sq ft

Installed price per unit

Local conditions

What makes Gulfport different for this job

Gulfport homes and the local housing stock

What a driveway costs against a Gulfport home

68% of Gulfport units are houses with their own lots, and 55% of homes are owner-occupied, so a driveway is usually the owner's call, subject to HOA rules where they apply.

At the midpoint of the range above, a typical new concrete driveway costs about 2.4% of Gulfport's $174,600 median home value, the 29th highest share among the 147 markets we price. The job takes a bigger bite out of a home's value here than in most places.

When to plan this work in Gulfport

When to pour a driveway in Gulfport

ACI treats concrete work as cold-weather work when the air is expected to drop below 40°F while the slab cures. In Gulfport, the average low stays above that all year at the Gulfport - Biloxi Airport weather station, so a driveway can be poured in any month without cold-weather protection most nights.

Heat is the other extreme: average highs reach 90°F or more in July and August in Gulfport, when crews tend to pour early in the morning so the surface doesn't dry out before it's finished.

Gulfport's weather and a new driveway

Gulfport averages 16 nights a year at or below freezing, according to NOAA's 1991–2020 normals, compared with medians of 50 across Mississippi weather stations and 124 across U.S. stations.

Freezing is limited here, so mix choice is mostly about strength and finish; ask the contractor to name the mix and its strength in the quote.

Driveway work that touches the curb or sidewalk usually needs a city right-of-way permit even when the slab itself does not.

Driveways in Gulfport at a glance
Nights at or below 32°F16
Yearly snowfall (nearby station)0.2 in
Yearly precipitation62.8 in
Contractor license (Mississippi)State Board of Contractors license for remodels over $10,000
Where to check a licenseMississippi State Board of Contractors

Local data checked October 2026 · Sources at the bottom of the page

Paving near protected trees in Gulfport

In Gulfport, no one may pave with concrete, asphalt or another impervious material, including driveways and sidewalks, within 5 feet inside the dripline of a protected tree, though the city's tree protection advisor may change that distance. Fill under a protected tree's limb spread is limited to 1 inch of soil unless approved protective measures are taken.

The code section addresses construction near trees generally; the paving limit is written for any person.

Gulfport Code Sec. 8-12 (construction near trees) · Checked October 10, 2026

Nearby pricing

How Gulfport compares with nearby cities

Labor

Labor rates

On a concrete driveway job in Gulfport, concrete finishers earn a median $18.30 an hour. After insurance, payroll taxes and overhead, contractors bill about $37-$48 per worker-hour.

Cement Masons and Concrete Finishers

$18.30/hrMedian pay
$37-$48/hrBilled rate

Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).

Before you sign

Before you sign in Gulfport

Get every quote to include

  • measured area, thickness, finish, and concrete specification
  • excavation, subbase, reinforcement, joints, and drainage
  • removal, haul-away, access, and site restoration
  • whether curb, sidewalk, frontage, or right-of-way work is included
Common questions

Frequently Asked Questions

How much does Concrete Driveway cost in Gulfport, MS?

Concrete driveway cost in Gulfport, MS: $3,520-$4,850 (typical job: 576 sq ft). Each option in the price table above has its own range.

How does pay for cement masons in the Gulfport-Biloxi area compare with the national median?

Median pay for cement masons in the Gulfport-Biloxi, MS metro area is 33% below the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.

How many 90-degree days does Gulfport get?

About 69 days a year reach 90°F or hotter at a nearby NOAA station, against 28 at the median U.S. station.

What climate zone is Gulfport in?

Harrison County is in climate zone 2A on the DOE's county list, which energy codes use to set insulation and window levels.

Ready for your own number?

We have already loaded Gulfport prices for this concrete driveway estimate. Enter your project details and ZIP code for a free planning estimate.

Get my estimate
Illustrative payment estimates NumeralQ examples use fixed assumptions. They are not loan offers or pre-qualification; NumeralQ does not contact lenders or access credit reports. View payment assumptions

Sources and methodology

  • NumeralQ estimator (pricing as of 2026-10-26)
  • Fixr cost guide, retrieved 2026-10-26
  • Home Depot online prices, store 121, retrieved 2026-10-26
  • NumeralQ estimate (no single published range; set from material prices and typical install hours)
  • Ready-mix delivered price, 2026 trade reporting ($130-$175/cu yd)
  • U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
  • City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
  • NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
  • U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
  • NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
  • NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
  • American Concrete Institute, ACI 306R-16 Guide to Cold Weather Concreting: cold weather exists when air temperature has fallen to, or is expected to fall below, 40°F during the protection period; summarized in NIH Office of Research Facilities, Cold Weather Concreting, Technical Bulletin, April 2021 (https://orf.od.nih.gov/TechnicalResources/Documents/Technical%20Bulletins/21TB/Cold%20Weather%20Concreting%20-%20April%202021%20Technical%20Bulletin_508%20.pdf)

This estimate is NumeralQ's national baseline with a Gulfport adjustment of 0.87×. How we estimate

$3,520-$4,850NumeralQ planning estimate
Get my estimate