Furnace replacement cost by size
The biggest driver is size: 40,000 BTU costs $5,260-$8,320 in Illinois, while 120,000 BTU costs $6,130-$10,070, about 19% more. Ask every contractor to quote the same measured size.
| Size | Cost |
|---|---|
| 40,000 BTU | $5,260-$8,320 |
| 60,000 BTU | $5,480-$8,760 |
| 80,000 BTUMost common | $5,700-$9,200 |
| 100,000 BTU | $5,920-$9,640 |
| 120,000 BTU | $6,130-$10,070 |
Furnace replacement cost by material or type
Material choice is the second big lever in Illinois. Electric furnace runs $3,960-$6,610, about 29% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $9,090-$13,850.
What will your Illinois furnace cost?
We have already loaded Illinois prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Pick your city
| City | Typical job | Link |
|---|---|---|
| Aurora | $5,720-$9,230 | Aurora |
| Chicago | $5,720-$9,230 | Chicago |
| Naperville | $5,720-$9,230 | Naperville |
| Rockford | $5,610-$9,080 | Rockford |
State conditions
Local planning note for Illinois
How Illinois's cities differ for this job
For furnace replacements, pay for HVAC technicians ranges from 23% above the U.S. median in Rockford to 28% above the U.S. median in Aurora, a 5-point gap that shows up most in labor-heavy bids. Of Illinois's covered cities, Rockford is the one with a priceable permit fee online: about $116 for the standard job.
Gas heat is most common in Naperville, where 86% of homes use it, and least common in Chicago (78%), so an all-electric quote is a bigger switch in Naperville. Home values change how big the bill feels: the typical job is 5.7% of the median home in Rockford but 1.4% in Naperville.
| City | Pay for HVAC technicians vs U.S. | HVAC permit ($12,000 job) | Homes heating with gas | Typical job as share of median home value |
|---|---|---|---|---|
| Aurora | +28% | Not published | 82% | 2.7% |
| Chicago | +28% | Not published | 78% | 2.2% |
| Naperville | +28% | Not published | 86% | 1.4% |
| Rockford | +23% | $116 | 82% | 5.7% |
Pay: BLS May 2025 metro median for the trade vs the U.S. median. Permit: base fee from the city's own schedule, before surcharges; "Not published" means no priceable figure was found online.
Labor rates
For furnace replacement in Illinois, contractors bill about $74-$97 per worker-hour for HVAC technicians, whose median pay is $37.21 an hour. The difference covers insurance, taxes, overhead and profit.
Before you sign in Illinois
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Local planning note for Illinois
How Illinois lien law affects a furnace replacement
A mechanic's lien is a claim against your house by someone who worked on your furnace replacement or supplied material for it and wasn't paid. In Illinois you're protected only if you ask the contractor for a sworn statement listing subs and suppliers before you pay (770 ILCS 60/5). Subs on an owner-occupied single-family home must notify you within 60 days of first work (60/21).
Request the sworn statement in writing with each payment request and pay subs by joint check or against their waivers. On a furnace replacement, the HVAC distributor that sold the furnace to your contractor is the usual lien claimant, so ask whether the equipment has been paid for.
Frequently Asked Questions
What does furnace replacement cost in Illinois?
They are planning estimates, not contractor bids.
Does pay for HVAC technicians vary across Illinois?
Not much. Across the 4 Illinois cities we cover, pay for HVAC technicians stays within a few points, from 23% above the national median in Rockford to 28% above in Aurora (BLS, May 2025).
Who licenses furnace installers in Illinois?
Local only. You can confirm a license is active through the Illinois IDFPR (roofing); city for other trades.
Would a heat pump cost less to run than a gas furnace in Illinois?
Furnace replacement cost in Illinois: $5,700-$9,200 (80,000 BTU furnace).
What is the minimum furnace efficiency allowed?
80% AFUE for a standard indoor gas furnace under current DOE rules.
Ready for your own number?
We have already loaded Illinois prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- Nicor Gas, checked 2026-10-26 (https://www.nicorgas.com/ways-to-save/residential-savings/rebates.html)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, table B25040 (house heating fuel) (https://data.census.gov/)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- NumeralQ comparison of city base permit fees for standard jobs ($15,000 re-roof, $12,000 HVAC replacement, 150 ft fence), read from each city's fee schedule on 26 Oct 2026
- Levelset, Illinois lien law FAQs (statute sections as cited there), checked November 10, 2026 (https://www.levelset.com/mechanics-lien/illinois-lien-law-faqs/)
Installed: Gas furnace, 95-96% AFUE