Furnace replacement cost by size
Find your size in the table. In Chicago the range runs from $5,290-$8,350 for 40,000 BTU to $6,160-$10,100 for 120,000 BTU; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 40,000 BTU | $5,290-$8,350 |
| 60,000 BTU | $5,500-$8,790 |
| 80,000 BTUMost common | $5,720-$9,230 |
| 100,000 BTU | $5,940-$9,660 |
| 120,000 BTU | $6,160-$10,100 |
Installed: Gas furnace, 95-96% AFUE
Furnace replacement cost by material or type
Material choice is the second big lever in Chicago. Electric furnace runs $3,980-$6,630, about 29% under gas furnace, 95-96% AFUE, while gas boiler, hot water (high efficiency) costs $9,280-$14,100.
| Type | Typical job |
|---|---|
| Electric furnace | $3,980-$6,630 |
| Gas furnace, 80% AFUE (single stage) | $5,050-$7,750 |
| Gas furnace, 95-96% AFUEMost common | $5,720-$9,230 |
| Propane furnace (95%) | $6,200-$9,850 |
| Oil furnace | $7,170-$11,220 |
| Gas furnace, 96%+ 2-stage or modulating | $7,650-$11,410 |
| Gas boiler, hot water (high efficiency) | $9,280-$14,100 |
Materials include waste and contractor markup. 80,000 BTU furnace
What will your Chicago furnace cost?
We have already loaded Chicago prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 5 items your quote includes. The costliest line in Chicago is "Ductwork repairs" at $3,120-$4,330 for the job.
- New PVC venting (when going 80% to 95%)$472-$1,240 / job
- Gas line work$413-$1,180 / job
- Ductwork repairs$3,120-$4,330 / job
- Variable-speed blower upgrade$460-$1,130 / job
- Smart thermostat$308-$551 / each
Show material-only prices
| Add-on | Materials |
|---|---|
| New PVC venting (when going 80% to 95%) | $173-$460 / job |
| Gas line work | $115-$402 / job |
| Ductwork repairs | $230-$575 / job |
| Variable-speed blower upgrade | $460-$1,040 / job |
| Smart thermostat | $132-$322 / each |
Installed price per unit
What makes Chicago different for this job
Chicago homes and the local housing stock
Chicago homes and their furnaces
Chicago furnace swaps happen in homes older than those in Aurora, Naperville and Rockford: half were built in 1953 or earlier, against 1987 there.
Fewer than half of Chicago units are houses (29%). For a furnace replacement in a condo, the association often controls where outdoor units and vents can go, so check its rules before you sign.
The midpoint of the range above is about 2.2% of Chicago's $334,100 median home value, the 64th highest share for a furnace replacement among 147 markets and near the middle of the pack.
Local planning note for Chicago
Chicago next to Naperville and Aurora
Chicago sits between its neighbors: a typical furnace replacement is 2.2% of the median home value here, 2.7% in Aurora and 1.4% in Naperville.
Chicago, Naperville and Aurora share one BLS metro pay figure for HVAC technicians (Chicago-Naperville-Elgin, IL-IN), so labor rates alone don't explain a gap between furnace replacement quotes in these cities.
| City | Typical job (midpoint) | Share of median home value | Pay for HVAC technicians vs U.S. |
|---|---|---|---|
| Chicago | $7,475 | 2.2% | +28% |
| Naperville | $7,475 | 1.4% | +28% |
| Aurora | $7,475 | 2.7% | +28% |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median.
How hard Chicago winters run
Chicago averages 5,753 heating degree days a year, according to NOAA's 1991–2020 normals, against 5,752 at the median Illinois station and 5,483 at the median U.S. station. The higher the number, the more a furnace runs.
Piped gas is the main heat in 78% of Chicago homes, per Census data, against 46% nationally.
Illinois's average residential gas price was $11.25 per Mcf in 2025 (EIA), against $15.34 nationally. Local utility rates vary.
Federal rules set an 80% AFUE minimum for new non-weatherized gas furnaces; condensing models run 90% and up and need PVC venting and a condensate drain.
| Heating degree days | 5,753 |
|---|---|
| Nights at or below 32°F | 106 |
| Gas price, Illinois 2025 | $11.25 per Mcf (U.S. $15.34) |
| Federal furnace minimum | 80% AFUE (non-weatherized gas) |
Local data checked October 2026 · Sources at the bottom of the page
When to plan this work in Chicago
Timing a furnace replacement in Chicago
The mildest months in Chicago are June and September, when NOAA's normals show the least heating and cooling demand at the Chicago Midway Airport weather station. Planning a furnace replacement for then means a day without heat or air conditioning is no hardship, unlike in January.
January is the heaviest heating month in Chicago, with about 1,207 heating degree days at the Chicago Midway Airport weather station, so an old furnace is most likely to fail then.
Permits for furnace, AC and heat pump work in Chicago
City rule
In Chicago, for a residential building up to four stories, the Department of Buildings says no building permit is needed to repair or replace in-kind (same type, size and shape) a furnace, boiler or air-conditioning appliance and its ductwork or radiators. Other complete replacements need a permit, and the Express Permit Program covers replacing equipment with equipment doing the same job, even with a new energy source, and installing a new heat pump or AC serving one unit.
Express Permit eligibility is based on HVAC load calculations, and the no-permit list may not apply to Chicago Landmarks or landmark districts.
Chicago Department of Buildings: work not requiring a building permit; Express Permit Program eligible work · Checked October 8, 2026
How Chicago compares with nearby cities
Labor rates
For furnace replacement in Chicago, contractors bill about $75-$97 per worker-hour for HVAC technicians, whose median pay is $37.48 an hour. The difference covers insurance, taxes, overhead and profit.
HVAC technicians
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Chicago
Get every quote to include
- fuel type, equipment model, capacity, and documented sizing basis
- venting, combustion air, gas or electrical connections, and ductwork
- removal, startup, commissioning, and safety checks included
- who checks and documents any required permits or inspections
Contractors per home in Chicago
How many HVAC shops work in Chicago's area
Census business counts for 2023 show 1,377 plumbing, heating and air conditioning contractors based in Cook County, the pool most Chicago homeowners draw on for a furnace replacement. That's 6.0 per 10,000 homes, 21% below the U.S. rate of 7.7, the 45th lowest among the 135 counties on this site. That count includes plumbers, since the Census groups them with HVAC firms.
That's a normal level of competition for Chicago, so a furnace replacement quote far above the others is worth questioning.
License check
License check: There is no statewide HVAC license in Illinois. Check with the city or county where the house sits.
Frequently Asked Questions
How much does Furnace Replacement cost in Chicago, IL?
Furnace replacement cost in Chicago, IL: $5,720-$9,230 (80,000 BTU furnace). The table above breaks it out by option.
How does pay for HVAC technicians in the Chicago-Naperville-Elgin area compare with the national median?
Median pay for HVAC technicians in the Chicago-Naperville-Elgin, IL-IN metro area is 28% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
What climate zone is Chicago in?
Cook County is in climate zone 5A on the DOE's county list, which energy codes use to set insulation and window levels.
Are federal home energy rebates available in Illinois?
Illinois's federal home electrification rebate program hasn't launched yet, according to NASEO's September 2026 status list.
Ready for your own number?
We have already loaded Chicago prices for this furnace replacement estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- NumeralQ estimate (no single published range; set from material prices and typical install hours)
- This Old House cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- U.S. Census Bureau, County Business Patterns 2023, establishments by county for NAICS 238160, 238170, 238220, 238310, 238320, 238330, 236118 and 561730, per 10,000 housing units from ACS 2020–2024 5-year table B25001 (https://www.census.gov/programs-surveys/cbp.html)
- NOAA National Centers for Environmental Information, U.S. Climate Normals 1991–2020, monthly normals for the nearest station: average high and low, days with 0.10 in. of precipitation or more, heating and cooling degree days (https://www.ncei.noaa.gov/data/normals-monthly/1991-2020/access/)
- View local evidence & sources →
- NOAA climate normals source
- EIA natural gas prices source
- DOE furnace rules source
- Illinois IDFPR (roofing); city for other trades source
- DOE climate zone guide source
- NASEO source
We start from a national baseline and adjust it for Chicago (1.23×). How we estimate