Fence installation cost by size
Find your size in the table. In Chicago the range runs from $670-$1,100 for 25 linear ft to $7,790-$13,170 for 400 linear ft; a quote that does not state the measured size is hard to compare.
| Size | Cost |
|---|---|
| 25 linear ft | $670-$1,100 |
| 50 linear ft | $1,150-$1,900 |
| 100 linear ft | $2,100-$3,510 |
| 150 linear ftMost common | $3,050-$5,120 |
| 200 linear ft | $4,000-$6,730 |
| 300 linear ft | $5,890-$9,950 |
| 400 linear ft | $7,790-$13,170 |
Installed: Wood privacy, 6 ft pressure-treated
Fence installation cost by material or type
Material choice is the second big lever in Chicago. Farm wire or electric runs $810-$1,510, about 72% under wood privacy, 6 ft pressure-treated, while composite privacy, 6 ft costs $6,420-$10,010.
| Type | Typical job | Installed |
|---|---|---|
| Farm wire or electric | $810-$1,510 | $4.09-$8.15 installed |
| Split rail (2-3 rail) | $1,540-$2,270 | $8.93-$13.18 installed |
| Chain link, 4 ft galvanized | $2,500-$3,690 | $15.37-$22.64 installed |
| Wood privacy, 6 ft pressure-treatedMost common | $3,050-$5,120 | $19.00-$32.21 installed |
| Wood picket, 4 ft | $3,270-$4,640 | $20.48-$28.98 installed |
| Cedar privacy, 6 ft | $3,740-$5,730 | $23.59-$36.26 installed |
| Vinyl privacy, 6 ft | $3,910-$6,300 | $24.74-$40.08 installed |
| Steel ornamental, 4-5 ft | $4,380-$6,670 | $27.91-$42.56 installed |
| Aluminum ornamental, 4-5 ft | $4,580-$6,660 | $29.22-$42.45 installed |
| Composite privacy, 6 ft | $6,420-$10,010 | $41.46-$64.77 installed |
Materials include waste and contractor markup. Typical job: 150 linear ft
What will your Chicago fence cost?
We have already loaded Chicago prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Add-ons and extra work
Check which of these 4 items your quote includes. The costliest line in Chicago is "Drive gate (double)" at $1,370-$3,150 each.
- Walk gate$339-$647 / each
- Drive gate (double)$1,370-$3,150 / each
- Remove old fence$4.14-$5.38 / linear ft
- Sloped or rocky ground (extra per ft)$2.73-$4.53 / linear ft
Show material-only prices
| Add-on | Materials |
|---|---|
| Walk gate | $107-$345 / each |
| Drive gate (double) | $575-$2,120 / each |
| Sloped or rocky ground (extra per ft) | $0.57-$1.72 / linear ft |
Installed price per unit
What makes Chicago different for this job
Chicago homes and the local housing stock
Chicago lots and fences
Only 29% of units in Chicago are houses, so for many households a fence is an association or landlord decision. Check the HOA rules before you get bids.
A typical new fence at the midpoint price equals roughly 1.2% of what the median Chicago home is worth ($334,100), 70th of the 147 markets NumeralQ covers.
Local planning note for Chicago
Chicago next to Naperville and Aurora
Relative to home values, Chicago falls in the middle, with a new fence at 1.2% of the median home, below Aurora and above Naperville.
If you're comparing new fence bids from Naperville or Aurora with bids from Chicago, each city's full price range is on its own page, linked below.
| City | Typical job (midpoint) | Share of median home value | Pay for fence installers vs U.S. | Permit for a 150 ft fence |
|---|---|---|---|---|
| Chicago | $4,085 | 1.2% | +6% (state figure) | Not published |
| Naperville | $4,085 | 0.8% | +6% (state figure) | Not published |
| Aurora | $4,085 | 1.5% | +6% (state figure) | $126 |
Typical job: midpoint of NumeralQ's typical-job range for each city. Pay: BLS May 2025 median for the trade vs the U.S. median. Permit: base fee from each city's schedule, before surcharges.
Landmark review for exterior work in Chicago
District/overlay only
Within a designated or proposed Chicago Landmark District, or for a designated or proposed Chicago Landmark, the Commission on Chicago Landmarks reviews permit applications for exterior work such as siding, roofing, windows, doors, fences and mechanical equipment. New windows need large-scale drawings comparing existing and proposed windows, roofing may need material samples, and driveways, curb cuts and street-visible porches or decks go to the Commission or its Permit Review Committee rather than staff.
Applies only to Chicago Landmarks and properties inside a designated or proposed Landmark District.
Commission on Chicago Landmarks: Permit Application Submission Requirements (2024) · Checked October 11, 2026
Local rules and records for Chicago
Fence rules in Chicago
| Rule | Value |
|---|---|
| Front yard | 4.5 ft (54 in) if more than 20% solid; up to 6 ft if at least 80% open |
| Permit needed | No building permit for a zoning-compliant fence up to 5 ft; taller fences use the Express Permit with zoning approval |
Zoning Ordinance 17-17-0309 encroachment table.
Chicago's climate and fence work
NOAA's climate normals count about 106 freezing nights a year in Chicago, against 122 at the median Illinois station and 124 at the median U.S. station.
In ground that freezes, post depth matters: ask the installer how deep the posts go and how they're set.
Fences 7 feet or lower are exempt from building permits under the model code; zoning rules on height and setbacks still apply, and they vary by city.
Before any post holes go in, 811 will mark buried utility lines for free.
| Nights at or below 32°F | 106 |
|---|---|
| Building permit (model code) | Not required up to 7 ft; zoning limits apply |
| Before you dig | Call 811 |
| Contractor license (Illinois) | No state general contractor license; cities license (e.g., Chicago) |
| Where to check a license | Illinois IDFPR (roofing); city for other trades |
Local data checked October 2026 · Sources at the bottom of the page
How Chicago compares with nearby cities
Labor rates
For fence installation in Chicago, contractors bill about $49-$63 per worker-hour for fence erectors, whose median pay is $24.38 an hour. The difference covers insurance, taxes, overhead and profit.
Fence Erectors
Median pay: BLS May 2025. Billed rate: what a contractor charges per worker-hour, estimated at 2.0 to 2.6 times pay (insurance, payroll taxes, overhead, profit).
Before you sign in Chicago
Get every quote to include
- measured length, height, material, gates, and hardware
- post spacing, footing details, slope, and removal of an old fence
- property-line assumptions, utility checks, and access
- whether any parcel-specific overlay or permit check is included
Fence permits in Chicago
City rule
In Chicago, the Department of Buildings says no building permit is needed for a fence no more than 5 feet high, measured on both sides, that conforms to the Chicago Zoning Ordinance. Taller fences need a permit; the Express Permit Program covers a front-yard fence up to 4.5 feet, or up to 6 feet if at least 80 percent open, and a backyard fence up to 6 feet. Fences over 6 feet need drawings by an Illinois-licensed architect or structural engineer.
Zoning Ordinance height rules apply even when no permit is needed, and the no-permit list may not apply to Chicago Landmarks or landmark districts.
Chicago Department of Buildings: Express Permit Program, Fence or Trash Enclosure; work not requiring a building permit · Checked October 8, 2026
Frequently Asked Questions
How much does Fence Installation cost in Chicago, IL?
Fence installation cost in Chicago, IL: $3,050-$5,120 (typical job: 150 linear ft). The table above breaks it out by option.
How does pay for construction laborers in the Chicago-Naperville-Elgin area compare with the national median?
Median pay for construction laborers in the Chicago-Naperville-Elgin, IL-IN metro area is 29% above the national median, according to BLS data for May 2025. Pay is one input to a quote, not the price itself.
How often does damaging wind hit Cook County?
NOAA logged 620 thunderstorm wind reports of 58 mph or more in Cook County from 2016 to 2025.
How much snow does Chicago get in a typical year?
About 38.8 inches a year at a nearby NOAA station (1991–2020 normals), against 15.9 inches at the median U.S. station that measures snow.
Ready for your own number?
We have already loaded Chicago prices for this fence installation estimate. Enter your project details and ZIP code for a free planning estimate.
Sources and methodology
- NumeralQ estimator (pricing as of 2026-10-26)
- Fixr cost guide, retrieved 2026-10-26
- Home Depot online prices, store 121, retrieved 2026-10-26
- Thumbtack cost guide, retrieved 2026-10-26
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/oes/)
- City permit fee schedules, retrieved October 2026 (see the permit line for this page's source)
- NumeralQ pricing model v2: materials plus local labor, methodology at /methodology
- City of Chicago Guide to Building Permits, Fence or Trash Enclosure; Fences (no permit required), checked 2026-10-26 (https://www.chicago.gov/city/en/sites/guide-to-building-permits/home/instructions/EPP/FENCE.html)
- U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, place-level tables B25018 (median rooms), B25035 (median year built), B25077 (median home value), B25024 (units in structure), B25003 (owner and renter occupancy) and B25041 (bedrooms) (https://data.census.gov/)
- NumeralQ pricing model v2: typical-job midpoints for all 147 markets, compared with the Census median home value (methodology at /methodology)
- U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics, May 2025, metro-area median pay by trade compared with the U.S. median (https://www.bls.gov/oes/tables.htm)
- NOAA climate normals source
- Local frost depth source
- International Residential Code source
- 811 call before you dig source
- Illinois IDFPR (roofing); city for other trades source
- NOAA Storm Events Database source
NumeralQ planning estimate. How we estimate